Hello everyone, this is my first ever question i've had to ask on this board but I figured you all could help me out rather quickly.

I've found an Apexi N1 damper system for an Integra Type-R that is available to me on a trade, but i'm not sure if it will work on an EM1.

The system is Currently on an EJ using ITR lower control arms and I'm trying to find out what I would need to make this set-up fit on your typical EM1 or if it will at all.

Thanks in advance for your help,
Derek

 

cross reference the part numbers

 

using what as a reference? I already know DC2 LCA's wont fit but that doesn't tell me what I need to convert everything to.

 

so you want to know if apexi n1 dampers will fit your em1? I would go to the suspension forum, they know their ****

 

only the last number on the part number is different but I would say it would fit.

 

well these dampers are intended for use on an Integra Type-R.Currently they are being used on an EJ Civic by using ITR lower control arms.

What I need to figure out is if the same set-up being used on an EJ could be used on my EM1, and if not what it takes to make it work.

 

I need to know how to put an ITR suspension on an EM1 in a nutshell, haha

 

ah ok, but ask this in the suspension forum, you will get more help

 

Yeah I posted in there right after here, no such luck.

 

It will work.

 

Thanks for acknowledging! but what, exactly, will work?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t0kyoStatus &raquo;</TD></TR><TR><TD CLASS="quote">It will work.</TD></TR></TABLE>

gotta love HT

 

itr rear lca's are not compatible with ek lca's so it will not work. i have heard that function 7 makes a rear lca for an ek so that you can use type r suspension however.

 

just thought id swing by, if you look closely at my display pic you will notice my ITR suspension

 

Are you running type r style dampers?

 

to run ITR suspension on EK/EM1's

you will need:

EG/DC front lower fork
Function7 Rear EK-ITR LCA.