TD Autowerkes is proud to present our newest project. For months we pondered the idea of building a k-series car as this is the direction a good portion of the honda market is headed, an opportunity fell into our lap, so we ran with it. The car was purchased from a local with a blown k20a, neither block nor head were salvageable, so the project began with a clean shell, transmission, suspension,harness and mounts, everything else was gathered within the last month . Here are some pictures of its progress and its completion, enjoy.


Specs:

K24 Bottom end
Import Builders Spec H-Beam rods
Wiseco 10:1 Standard Bore pistons
Cometic Head gasket
GE head studs
Full Ferrea Valvetrain
K20A2 Head
Stock Cams
Competition Clutch Twin Disc
TD Autowerkes Divided Turbo Manifold
2 x Tial 44mm wastegates
Tial 50mm Q Bov
Garrett GT4094R
AEM EMS
1200cc Injectors
3inch Downpipe/Exhaust
Custom TD Autowerkes Intercooler and piping
AEM 3.5 bar map sensor
Honda Water/Oil Pump/Timing Chain/Bearings

Day 1:






1 week later:







2 weeks later (break taken for Moroso NOPI event):






And finally:






The car made 347hp/260tq at 7.2 psi on thusday, a few bugs worked out and it will be back on the dyno this weekend and ready for the track soon thereafter

A very special thanks goes to:

Lance Ho Lung (the tuning guru)
Tial Sport
Ferrea Racing
Turbo by Garrett
AEM
Competition Clutch

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cwest EK &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

barefoot in a shop, that's brave!

 

flip flops...... foot started hurting for no reason ....so yeahh

 

super nice I wanna see the torque curve when you get the tuning done.

 

Nice build!!! Gotta love them compter chairs, roll around the shop like that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kyden &raquo;</TD></TR><TR><TD CLASS="quote">

barefoot in a shop, that's brave!</TD></TR></TABLE>caught my eye too. nice project car

 

Setup looks great guys I'm more of a fan of the concept of working on the car from the comfort of a leather chair

 

Nice!

 

Clean!!!

 

cool!

 

 

Awesome build keep it up!

 

 

barefoot , in a chair? must be nice!

 

This is one of the nicest EG's I've seen in a while! Awesome work, guys. Be sure to post some vids!

 

What tranny are you using?

 

looks good

 

nice!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by scoop &raquo;</TD></TR><TR><TD CLASS="quote">What tranny are you using?</TD></TR></TABLE>


04 RSX-S 6 spd

 

How does the hood look shut? I had some issues getting the hood to clear my 2.4 w/RBC . I was using Hasport mounts.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by na200whp &raquo;</TD></TR><TR><TD CLASS="quote">How does the hood look shut? I had some issues getting the hood to clear my 2.4 w/RBC . I was using Hasport mounts.</TD></TR></TABLE>

very carefully.....lol


had to "trim" the underside of the hood

 

nice project!!!

I like the new Tial Q bov that you have!!!

 

man.. only 7 psi and close to 400 hp.. I think its time for me to go k-series.

 

love it! sick car