f.s. civic si clean title b.a.r.d. pics
92 civic si that i am posting for a friend...taking offers now... NO TRADES. here is the current mods of the car as it sit... and thats all it does is sit in the garage..this car made 200 with 140 torque i believe i will be getting the dyno sheets and more pictures of the car soon..
ENGINE
-ls vtec motor with no more than 1500 miles on it
-bottom end has gsr crank and rods with pr3 pistons
-balanced bottom and blueprinted bottom end
-acl bearings
-ctr crank pulley
-gsr head
-mild port job with complete skunk 2 valvetrain
-skunk 2 stage 2 bump cams and crower camgears
-hondata s300 in a p28
-ported gsr skunk 2 manifold
-power 68mm throttle body
-rc 310 injectors
-hytech/rage replica header
-r crew test pipe
-2 1/2 piping all the way back with magnafolw muffler
-ITR tranny with 4.7 and lsd(all new bearings & syncros) with exedy clutch and 8lb
flywheel
-msd wires
-comptech iceman box
-Body, suspension , and interior
-ctr 5 lug with usdm itr white rims
-buddy club suspension not too sure on specs
-autopower 7pt roll cage with crow harness bolt in cage
-1 recaro in black not the ones pictured seat and a stock integra
-itr front rear sway bars 22mm
-mugen front and rear sway bars
-momo monte carlo steering wheel with quick release
-power windows and locks in the car wired in like oem
-ex door panels with tweeters
-vis carbon fiber hood
-winds west rs front lip the real one
-1 fog light and the other is a carbon fiber air duct
-paint was goin for long beach plue pearl but came out different so i dont know the color
-jdm thin side moldings
There is probably more but this all i know i can recall for more details send me pm....





Modified by jdmef9gsr at 11:04 AM 4/18/2008
Modified by jdmef9gsr at 9:52 PM 4/19/2008
ENGINE
-ls vtec motor with no more than 1500 miles on it
-bottom end has gsr crank and rods with pr3 pistons
-balanced bottom and blueprinted bottom end
-acl bearings
-ctr crank pulley
-gsr head
-mild port job with complete skunk 2 valvetrain
-skunk 2 stage 2 bump cams and crower camgears
-hondata s300 in a p28
-ported gsr skunk 2 manifold
-power 68mm throttle body
-rc 310 injectors
-hytech/rage replica header
-r crew test pipe
-2 1/2 piping all the way back with magnafolw muffler
-ITR tranny with 4.7 and lsd(all new bearings & syncros) with exedy clutch and 8lb
flywheel
-msd wires
-comptech iceman box
-Body, suspension , and interior
-ctr 5 lug with usdm itr white rims
-buddy club suspension not too sure on specs
-autopower 7pt roll cage with crow harness bolt in cage
-1 recaro in black not the ones pictured seat and a stock integra
-itr front rear sway bars 22mm
-mugen front and rear sway bars
-momo monte carlo steering wheel with quick release
-power windows and locks in the car wired in like oem
-ex door panels with tweeters
-vis carbon fiber hood
-winds west rs front lip the real one
-1 fog light and the other is a carbon fiber air duct
-paint was goin for long beach plue pearl but came out different so i dont know the color
-jdm thin side moldings
There is probably more but this all i know i can recall for more details send me pm....





Modified by jdmef9gsr at 11:04 AM 4/18/2008
Modified by jdmef9gsr at 9:52 PM 4/19/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brand0 »</TD></TR><TR><TD CLASS="quote">$13,000 are you serious?</TD></TR></TABLE>
I was thinking the same thing, I see K20 EG's that are cleaner than this for cheaper
I was thinking the same thing, I see K20 EG's that are cleaner than this for cheaper
i was wondering if you could ask your friend what color he painted it. ( color code and where he found the color ) it looks very much like the color that i want to paint my car and would like to confirm the paint code.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Sirfallsalot243
All Motor / Naturally Aspirated
38
Mar 7, 2008 11:40 AM
Sirfallsalot243
Vehicles for sale
14
Dec 16, 2007 10:10 AM
OneThirtyEight
Acura Integra
12
Oct 4, 2001 12:43 PM




