OT: Things to do over Christmas when your bored....
Couple of quick notes:
* Anyone who says a firewall swap is "better" is flat out wrong, after you look closely at the EG A pillar base, you'll understand that it's strength lies within. Multiple layers of steel make up the door jam and windshield base.
* Re-alignment of the clip is easier than a FW swap.
* Electronics are easier with a clip swap.
* If your jigs are designed correctly, a clip chop is not a big deal.
* I had the car on the alignment rack before the cut then after the cut, I re-aligned it......the rear toe did not change.
* Company that installed the windshield said "This screen fits better than some new cars"
* ***** the haters, cost to fix the car with OEM LHD sheet metal and headlights was almost 1.4 times the cost of clipping it. Plus, GheyDM value-add for re-sell is a plus.
* ***** the haters.
* Will take many years to competently drive on track at speed again due to change in seating location....
* ***** the haters, was cheaper to fix this way.
* Over 80 hours in the job.
* Over 6 hours in the floor-board jig alone.
-------------------------------------------------------------------------


I decided to make the cut under the front seat mounts to aid against horizontal shear



Note: floorboard jig












Rattle can ownz all

Vertical plates were added to aid against vertical shear


Modified by B18CXr at 8:50 PM 3/26/2008
* Anyone who says a firewall swap is "better" is flat out wrong, after you look closely at the EG A pillar base, you'll understand that it's strength lies within. Multiple layers of steel make up the door jam and windshield base.
* Re-alignment of the clip is easier than a FW swap.
* Electronics are easier with a clip swap.
* If your jigs are designed correctly, a clip chop is not a big deal.

* I had the car on the alignment rack before the cut then after the cut, I re-aligned it......the rear toe did not change.
* Company that installed the windshield said "This screen fits better than some new cars"
* ***** the haters, cost to fix the car with OEM LHD sheet metal and headlights was almost 1.4 times the cost of clipping it. Plus, GheyDM value-add for re-sell is a plus.
* ***** the haters.
* Will take many years to competently drive on track at speed again due to change in seating location....
* ***** the haters, was cheaper to fix this way.
* Over 80 hours in the job.
* Over 6 hours in the floor-board jig alone.
-------------------------------------------------------------------------


I decided to make the cut under the front seat mounts to aid against horizontal shear



Note: floorboard jig












Rattle can ownz all

Vertical plates were added to aid against vertical shear


Modified by B18CXr at 8:50 PM 3/26/2008
00 Type R K20a swapped
05 dodge ram 2500 diesel lifted on 35's
White Russians own me
Modified by B18CXr at 11:19 PM 3/24/2008
05 dodge ram 2500 diesel lifted on 35's
White Russians own me
Modified by B18CXr at 11:19 PM 3/24/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CXr »</TD></TR><TR><TD CLASS="quote">00 Type R K20a swapped
05 dodge ram 2500 diesel lifted on 35's
</TD></TR></TABLE>
bwahahaha!! Yes!
Looks great Jack. Get ready to back through drive thrus.
Modified by B18CXr at 11:23 PM 3/24/2008
05 dodge ram 2500 diesel lifted on 35's
</TD></TR></TABLE>bwahahaha!! Yes!
Looks great Jack. Get ready to back through drive thrus.
Modified by B18CXr at 11:23 PM 3/24/2008
Trending Topics
with them spring rates you got that bish, it's gonna crack in half
I've recently seen it in person, SO WELL DONE it's hard to tell it was ever apart like that.
If your free tomorrow night, call me- heading to dinner..somewhere
I've recently seen it in person, SO WELL DONE it's hard to tell it was ever apart like that.
If your free tomorrow night, call me- heading to dinner..somewhere
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18CXr »</TD></TR><TR><TD CLASS="quote">Ferrell
speaking of ricer....</TD></TR></TABLE>
But he has the best avatar on this piece
speaking of ricer....</TD></TR></TABLE>
But he has the best avatar on this piece
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tartje »</TD></TR><TR><TD CLASS="quote">better bring this ish to Expo!
then I can show some f00's what RHD is all about
sweet job
</TD></TR></TABLE>
If mine was RHD I could smoke a [pejorative] with the correct hand.
Edit - WTF? It edited out f a g. Its a phucking cig. This new censorship chit sucks.
then I can show some f00's what RHD is all about
sweet job
</TD></TR></TABLE>If mine was RHD I could smoke a [pejorative] with the correct hand.
Edit - WTF? It edited out f a g. Its a phucking cig. This new censorship chit sucks.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Aquafina »</TD></TR><TR><TD CLASS="quote">
If mine was RHD I could smoke a [pejorative] with the correct hand.
Edit - WTF? It edited out f a g. Its a phucking cig. This new censorship chit sucks.</TD></TR></TABLE>
tell me about it!!! I LOVE *****!!!!!!!!!!!!!!
Looks good you crazy bastid!!!
If mine was RHD I could smoke a [pejorative] with the correct hand.
Edit - WTF? It edited out f a g. Its a phucking cig. This new censorship chit sucks.</TD></TR></TABLE>
tell me about it!!! I LOVE *****!!!!!!!!!!!!!!
Looks good you crazy bastid!!!
Haha I gotta show this to my folks and inlaws, they'll get a big kick outta it
We need to meet up sometime soon, been forever!!!
P.S. What motor???
We need to meet up sometime soon, been forever!!!
P.S. What motor???



