lumpys N/A, D16, EK, ITR(crower, blox, jdm)
Thread Starter
Honda-Tech Member
Joined: Aug 2007
Posts: 532
Likes: 0
From: pilgrims, ma
lumpys N/A, D16, EK, ITR(crower, blox, jdm)
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
I'll be taking pics over the weekend and boxing/sorting everything. In the mean time lets get started with selling. Everything is new unless stated otherwise. I've been working on this car for a while, but my s2000 is just so much fun. So away goes my baby.
located in mass, cape area have refrences
d16z6
Crower stage 3 camshaft $200
blox flat faced valves $180
Crower valve springs $180
Crower retainers $180
d16z6 ported head, decked, checked with no valve cover $260
d16z6 block .50 over, decked, cleaned, painted, checked no crank, oil pan inc $280
d16z6 crank, polished, mic'd, balanced with oem pully with end bolt $120
d16z6 tranny $100
pm7/zc pistons on d16z6 rods, rods resized(not half assed)with arp bolts $180
arp headbolts d16z6 $75
ek
aftermarket brake lines $75 front
blox rear lower control arms(blue) $80
itr 22mm rear sway bar $90
itr front calipers, painted, new clips, grinded(amazing refurb work) $150
recaro knock off seats, black, red stiching, pair $200
arp extended wheel studs 8, $35
99 ek sedan chassis, stripped, flat black, clean title, no accidents,
engine bay shaved, stripped off all tar, door stills filled and shaved,
no front bumper, rear bumper with lip, sideskirts inc, rear lights, doors,
$1800
adr gt 16" rims painted red with tires(80-90% tread) $200
enjoy, prices are without shipping prices are nego, but i'm in no rush.
not interested in trades, and won't do any holds till payday unless a 25% depo is paypaled.
you can contact me on aim, or honda-tech, aim perf (menkio001)
thank you
NEW PHOTOS
Modified by LumpyTheGrumpyCamshaft at 5:39 AM 4/14/2008
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
PLEASE BUMP AFTER YOU READ THIS
I'll be taking pics over the weekend and boxing/sorting everything. In the mean time lets get started with selling. Everything is new unless stated otherwise. I've been working on this car for a while, but my s2000 is just so much fun. So away goes my baby.
located in mass, cape area have refrences
d16z6
Crower stage 3 camshaft $200
blox flat faced valves $180
Crower valve springs $180
Crower retainers $180
d16z6 ported head, decked, checked with no valve cover $260
d16z6 block .50 over, decked, cleaned, painted, checked no crank, oil pan inc $280
d16z6 crank, polished, mic'd, balanced with oem pully with end bolt $120
d16z6 tranny $100
pm7/zc pistons on d16z6 rods, rods resized(not half assed)with arp bolts $180
arp headbolts d16z6 $75
ek
aftermarket brake lines $75 front
blox rear lower control arms(blue) $80
itr 22mm rear sway bar $90
itr front calipers, painted, new clips, grinded(amazing refurb work) $150
recaro knock off seats, black, red stiching, pair $200
arp extended wheel studs 8, $35
99 ek sedan chassis, stripped, flat black, clean title, no accidents,
engine bay shaved, stripped off all tar, door stills filled and shaved,
no front bumper, rear bumper with lip, sideskirts inc, rear lights, doors,
$1800
adr gt 16" rims painted red with tires(80-90% tread) $200
enjoy, prices are without shipping prices are nego, but i'm in no rush.
not interested in trades, and won't do any holds till payday unless a 25% depo is paypaled.
you can contact me on aim, or honda-tech, aim perf (menkio001)
thank you
NEW PHOTOS
Modified by LumpyTheGrumpyCamshaft at 5:39 AM 4/14/2008
