XtremeRaceCars Pro Mod engine sneek peek
[IMG][/IMG] 
Honda-Tech Member
Joined: May 2002
Posts: 15,814
Likes: 8
From: Dallas, TX, USA
Re: (Jared)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jared »</TD></TR><TR><TD CLASS="quote"> whats up with the sensor on top of the wastegate housing? i demand more pictures</TD></TR></TABLE>
Datalogging pressure to the top of the gate i'd assume? Or maybe setting up a motec to control boost with gate pressure being the target rather than MAP, like the NLR controllers do.
Datalogging pressure to the top of the gate i'd assume? Or maybe setting up a motec to control boost with gate pressure being the target rather than MAP, like the NLR controllers do.
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 178
Likes: 0
Re: (Jared)
It's a Chemi, the sensor on the gate is a wastegate position sensor. These are available through us for the Tial line up. The wastegate position sensor was designed by Shane Tecklenburg. It allows you to sense the valve position similar to a TPS sensor going from 0 - 100% it is a 0 - 5V sensor just the same
I will post some more pictures tomorrow. This was the only one on my camera so i threw it up here.
I will post some more pictures tomorrow. This was the only one on my camera so i threw it up here.
Trending Topics
Honda-Tech Member
iTrader: (3)
Joined: Feb 2003
Posts: 4,946
Likes: 0
From: wEsT of WattS...NoRth oF CompTon, CA
Re: XtremeRaceCars Pro Mod engine sneek peek (XtremeRaceCars)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtremeRaceCars »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
thats all
</TD></TR></TABLE>thats all
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 178
Likes: 0
Re: XtremeRaceCars Pro Mod engine sneek peek (Bizarre)
Just finished up a bunch of work on Carlos Montanos car helping him get ready for the NDRA opener, so now i can go back to doing body work on my baby.
[IMG][/IMG]
[IMG][/IMG]
Honda-Tech Member
Joined: Sep 2002
Posts: 1,337
Likes: 0
From: Deer Park, NY, USA
Re: (XtremeRaceCars)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtremeRaceCars »</TD></TR><TR><TD CLASS="quote">The wastegate position sensor was designed by Shane Tecklenburg.</TD></TR></TABLE>
Shane told me about that sensor at last year's pri.. Gangster
Your in good hands with Shane....
Shane told me about that sensor at last year's pri.. Gangster
Your in good hands with Shane....
Honda-Tech Member
Joined: Nov 2006
Posts: 93
Likes: 0
From: Rowlett, TX, usa
Re: XtremeRaceCars Pro Mod engine sneek peek (XtremeRaceCars)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtremeRaceCars »</TD></TR><TR><TD CLASS="quote">Just finished up a bunch of work on Carlos Montanos car helping him get ready for the NDRA opener, so now i can go back to doing body work on my baby.
[IMG][/IMG]</TD></TR></TABLE>Where the 3 rotor go?
[IMG][/IMG]
</TD></TR></TABLE>Where the 3 rotor go?
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 178
Likes: 0
Re: (Enzo-Racing)
Yes, with out a doubt Shane is the best in the business. I have known him for some 7 years now and he continues to impress me every time we get together on a project. He is a great friend and a key to our success.
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 178
Likes: 0
Re: XtremeRaceCars Pro Mod engine sneek peek (rotorholic)
The rotory has been gone for a while now, I did the header, all the piping and the wiring end of last season. We just finished up making a smaller downpipe for his new exhaust housing. Man i'm not used to working with such small tubing on an exhaust 
Honda-Tech Member
Joined: May 2001
Posts: 7,190
Likes: 0
From: Tallahassee, FL, US
Re: (XtremeRaceCars)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtremeRaceCars »</TD></TR><TR><TD CLASS="quote">It's a Chemi, the sensor on the gate is a wastegate position sensor. These are available through us for the Tial line up. The wastegate position sensor was designed by Shane Tecklenburg. It allows you to sense the valve position similar to a TPS sensor going from 0 - 100% it is a 0 - 5V sensor just the same
I will post some more pictures tomorrow. This was the only one on my camera so i threw it up here.</TD></TR></TABLE>
cool. i knew by the position of it that there had to be more there than just sensing pressure, you could do that off the top hose.
I will post some more pictures tomorrow. This was the only one on my camera so i threw it up here.</TD></TR></TABLE>
cool. i knew by the position of it that there had to be more there than just sensing pressure, you could do that off the top hose.
Honda-Tech Member
Joined: Nov 2006
Posts: 93
Likes: 0
From: Rowlett, TX, usa
Re: XtremeRaceCars Pro Mod engine sneek peek (XtremeRaceCars)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtremeRaceCars »</TD></TR><TR><TD CLASS="quote">The rotory has been gone for a while now, I did the header, all the piping and the wiring end of last season. We just finished up making a smaller downpipe for his new exhaust housing. Man i'm not used to working with such small tubing on an exhaust </TD></TR></TABLE>Very nice work, Is that the new mazda piston engine like in dee's car?
</TD></TR></TABLE>Very nice work, Is that the new mazda piston engine like in dee's car?