just bought B16A
Thread Starter
Honda-Tech Member
Joined: Mar 2008
Posts: 32
Likes: 0
From: Sandpoint, Idaho, US
just bought B16A
So i just a pretty nice built B16A tranny axels with headers, skunk2 intake manifold, stage2 clutch and AEM fuel rail to go in my 89 CRX DX. Well the wiring harness is cut and there is no alternator 
My Questions are where can i find a harness for this i looked on e-bay and found nothin, will the axels work from the B16 to my CRX and what year and car does the B16A originally come out of? this is my first post so any advice would be helpfull 
thanx Colby.
My Questions are where can i find a harness for this i looked on e-bay and found nothin, will the axels work from the B16 to my CRX and what year and car does the B16A originally come out of? this is my first post so any advice would be helpfull thanx Colby.
Honda-Tech Member
Joined: Nov 2003
Posts: 1,755
Likes: 2
From: Alberta, Canada
Re: just bought B16A (sleeper17)
You have some research to do.
here is the FAQ section for our chassis. all your info is in this thread and the stickies at the top of the forum.
https://honda-tech.com/zerothread/1508680
Welcome to the board, but PLEASE, dont expect to be spoonfed everything just because you filled out the registration form
Again, Wlcome to Honda-Tech. Get reading!
here is the FAQ section for our chassis. all your info is in this thread and the stickies at the top of the forum.
https://honda-tech.com/zerothread/1508680
Welcome to the board, but PLEASE, dont expect to be spoonfed everything just because you filled out the registration form
Again, Wlcome to Honda-Tech. Get reading!
Honda-Tech Member
Joined: Jul 2003
Posts: 9,638
Likes: 1
From: Near Charlotte
Re: just bought B16A (89s1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89s1 »</TD></TR><TR><TD CLASS="quote">You have some research to do.
here is the FAQ section for our chassis. all your info is in this thread and the stickies at the top of the forum.
https://honda-tech.com/zerothread/1508680
Welcome to the board, but PLEASE, dont expect to be spoonfed everything just because you filled out the registration form
Again, Wlcome to Honda-Tech. Get reading! </TD></TR></TABLE>
here is the FAQ section for our chassis. all your info is in this thread and the stickies at the top of the forum.
https://honda-tech.com/zerothread/1508680
Welcome to the board, but PLEASE, dont expect to be spoonfed everything just because you filled out the registration form
Again, Wlcome to Honda-Tech. Get reading!
</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post