swapping out the 4 speed

Reply Subscribe

Thread Tools

Search this Thread

Mar 8, 2008 | 03:30 PM

4door93civic

Thread Starter

Honda-Tech Member

Joined: Aug 2003

Posts: 2,018

Likes: 0

From: where its cold, or, usa

swapping out the 4 speed

i havent done this in a long time so i forgot a few things...im pulling my 4 speed out of my hatch and putting in my 5 speed can i use the 4 speed hubs with 5 speed axles? or can i use the existing axles with the 5 speed?thanks for any help.

Mar 8, 2008 | 03:52 PM

Crx Jimmy

Honda-Tech Member

Joined: Oct 2004

Posts: 4,915

Likes: 1

From: jimmysville VT,, NY, USA

Re: swapping out the 4 speed (4door93civic)

just use the existing axles, if you use 5spd axles you will need the si/dx spindles

Mar 8, 2008 | 03:59 PM

4door93civic

Thread Starter

Honda-Tech Member

Joined: Aug 2003

Posts: 2,018

Likes: 0

From: where its cold, or, usa

Re: swapping out the 4 speed (Crx Jimmy)

ok so i can run the 4 speed axles in the 5 speed tranny? thanks for your help

Mar 8, 2008 | 04:42 PM

biggee

Honda-Tech Member

Joined: Dec 2004

Posts: 208

Likes: 1

From: Saskatoon, SK, Canada

yup, just the outer hubs are different size ( smaller on the 4spd).

Mar 8, 2008 | 07:41 PM

turboZChatch

Honda-Tech Member

Joined: Mar 2003

Posts: 1,159

Likes: 0

From: CLINIC

Re: swapping out the 4 speed (Crx Jimmy)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crx Jimmy »</TD></TR><TR><TD CLASS="quote">just use the existing axles, if you use 5spd axles you will need the si/dx spindles</TD></TR></TABLE>