This is not another one of those threads asking how to remove the sideskirt, I already know how simple that one is. My question is, what should I do about the screws on my sideskirt being stripped? Or it might be the bottom of the skirt is stripped. Anyway, I unscrew and nothing happens except the screw spinning in place. I was thinking about pulling the screw out and buying new ones but I don't know how good of a solution that will be. Any suggestions?

 

BTW..i drive a 94 Ls

 

http://www.team-integra.net/se...D=739

 

From my experience when the plastic pressure screws spin freely they are usually unusable, they do have a tool to remove these but At this point it may just be better to buy some and replace them when re-installing.

 

after removing all teh bottom an next to teh wheel screw just slide it to the left. it should come out. ohz. replacing dem plastic are like 1.95 a piece at the dealership

 

i have the same problem too -_-... just go to the dealership and ask for new ones ? acura dealership ? and do i just pull out the screws if they stay in place like what he says ?

 

Thanks for the info guys