s.patel's Garage Sale (EG/B-series/D-series/Apex'i/Brembo/Slips/ stuff ETC....) Lots o/ Pics
Im planning on getting a dog so I need to get rid of all the Honda stuff I've accumulated over the years thats taking up space in my garage. Since I no longer have a honda I'll be flexible on the prices, just send me a PM and let me know what your'e interested in. Located in Fontana 909
UKDM LS B18b longblock $350: Bought off of member (forgot username) awhile back, was gonna go ls-vtec but ran outta money and changed my mind. Was told it had 50k miles. Includes IM w/ hondata manifold gasket, engine harness, and alternator. Is missing a Distributor and injectors




***SOLD***B18c1 GSR Head $100 : #2 cylinder threw a rod so the head itself is crap but the internals can be salvaged. It has skunk 2 (valvesprings and titanium retainers) and ss supertech valves (4 are toast, the others might be able to be reused) Supertech sells valves individually so the damaged ones can be replaced http://www.importperformancepa....html
Head does not have Cams/Gears/Distributor






***SOLD***B16a2 Shortblock $80 (Blew a ringland on the #1 piston. Other than that the sleeves are in good shape and there is no scarring. Did a compression test before the head was taken off and the results were (30/205/200/205). Perfect block for rebuild. Does not include an oilpan.



***BOTH SOLD***B18/B20 Valve covers $15 for the nice one, $5 for the not so nice one

***SOLD***2 Ton Engine Hoist $80

JDM EG sunroof $25 (glass is cracked, but the motor is in good shape)

Black EG hatch cover $60 (has a small rip/crack pictured, hardly noticable when installed)


***SOLD***Turbo piping/Downpipe for EG $30 (Downpipe has 5 bolt flange)

***SOLD***Pair of Black 15' Rota Slips with beater tires $80



***SOLD***New Front/Rear Brembo Blank rotors for 92-95 Civic Si $80



B-series Heavy duty pressure plate $40 (only used for 100 miles then final drive blew)


S2k/b-series Throttle Body $40 (diameter is same as itr: 66mm on the outerside/62mm on the butterfly side) Only difference between the two is the s2k tb doesn't come w/ an idle adjust screw. Will fit on b-series intake manifolds.

B-series Used (ITR) oil pump $30 (used for about 10k miles)

***SOLD***Apex'i World Sport muffler for EK hatchbacks but also fits EG hatchbacks $100

Downpipe w/ vband flange that was used on the Apex'i D1GP drift RX7 $10 (can be cut and modified to fit other applications)

D-series Shift Linkage $40

****SOLD****D-series Axles $40

D-series Front engine mounts $10

***SOLD***OEM honda wheel locks w/ key $5

Honda Floormats $15 for a set of 4 (complete set)



Modified by s.patel at 2:14 PM 3/5/2008
Modified by s.patel at 4:03 PM 3/7/2008
Modified by s.patel at 3:30 PM 3/11/2008
Modified by s.patel at 7:09 PM 4/6/2008
Modified by s.patel at 8:29 AM 4/22/2008
UKDM LS B18b longblock $350: Bought off of member (forgot username) awhile back, was gonna go ls-vtec but ran outta money and changed my mind. Was told it had 50k miles. Includes IM w/ hondata manifold gasket, engine harness, and alternator. Is missing a Distributor and injectors




***SOLD***B18c1 GSR Head $100 : #2 cylinder threw a rod so the head itself is crap but the internals can be salvaged. It has skunk 2 (valvesprings and titanium retainers) and ss supertech valves (4 are toast, the others might be able to be reused) Supertech sells valves individually so the damaged ones can be replaced http://www.importperformancepa....html
Head does not have Cams/Gears/Distributor






***SOLD***B16a2 Shortblock $80 (Blew a ringland on the #1 piston. Other than that the sleeves are in good shape and there is no scarring. Did a compression test before the head was taken off and the results were (30/205/200/205). Perfect block for rebuild. Does not include an oilpan.



***BOTH SOLD***B18/B20 Valve covers $15 for the nice one, $5 for the not so nice one

***SOLD***2 Ton Engine Hoist $80

JDM EG sunroof $25 (glass is cracked, but the motor is in good shape)

Black EG hatch cover $60 (has a small rip/crack pictured, hardly noticable when installed)


***SOLD***Turbo piping/Downpipe for EG $30 (Downpipe has 5 bolt flange)

***SOLD***Pair of Black 15' Rota Slips with beater tires $80



***SOLD***New Front/Rear Brembo Blank rotors for 92-95 Civic Si $80



B-series Heavy duty pressure plate $40 (only used for 100 miles then final drive blew)


S2k/b-series Throttle Body $40 (diameter is same as itr: 66mm on the outerside/62mm on the butterfly side) Only difference between the two is the s2k tb doesn't come w/ an idle adjust screw. Will fit on b-series intake manifolds.

B-series Used (ITR) oil pump $30 (used for about 10k miles)

***SOLD***Apex'i World Sport muffler for EK hatchbacks but also fits EG hatchbacks $100

Downpipe w/ vband flange that was used on the Apex'i D1GP drift RX7 $10 (can be cut and modified to fit other applications)

D-series Shift Linkage $40

****SOLD****D-series Axles $40

D-series Front engine mounts $10

***SOLD***OEM honda wheel locks w/ key $5

Honda Floormats $15 for a set of 4 (complete set)



Modified by s.patel at 2:14 PM 3/5/2008
Modified by s.patel at 4:03 PM 3/7/2008
Modified by s.patel at 3:30 PM 3/11/2008
Modified by s.patel at 7:09 PM 4/6/2008
Modified by s.patel at 8:29 AM 4/22/2008
Joined: Nov 2007
Posts: 5,189
Likes: 1
From: Avatar War Veteran, I will not leave.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_JNKY »</TD></TR><TR><TD CLASS="quote">bump for a good prices and the ws2!</TD></TR></TABLE>
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by arbys2k »</TD></TR><TR><TD CLASS="quote">where you located? Interested in the Civic floor mats and possibly the WS exhaust. </TD></TR></TABLE>
dude, do you know how to read?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s.patel »</TD></TR><TR><TD CLASS="quote">Im planning on getting a dog so I need to get rid of all the Honda stuff I've accumulated over the years thats taking up space in my garage. Since I no longer have a honda I'll be flexible on the prices, just send me a PM and let me know what your'e interested in. <U>Located in Fontana 909</U>
</TD></TR></TABLE>
dude, do you know how to read?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s.patel »</TD></TR><TR><TD CLASS="quote">Im planning on getting a dog so I need to get rid of all the Honda stuff I've accumulated over the years thats taking up space in my garage. Since I no longer have a honda I'll be flexible on the prices, just send me a PM and let me know what your'e interested in. <U>Located in Fontana 909</U>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by da9leo »</TD></TR><TR><TD CLASS="quote">
dude, do you know how to read?
</TD></TR></TABLE>
my bad...i'm half asleep here at work. Sheesh, atleast he got a bump out of it right??
dude, do you know how to read?
</TD></TR></TABLE>
my bad...i'm half asleep here at work. Sheesh, atleast he got a bump out of it right??
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by arbys2k »</TD></TR><TR><TD CLASS="quote">where you located? Interested in the Civic floor mats and possibly the WS exhaust. </TD></TR></TABLE>
Pm sent.
Pm sent.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racer22 »</TD></TR><TR><TD CLASS="quote">PmD</TD></TR></TABLE>
Replied.
Replied.





