took off my fuel rail to replace it with a replacement.
I overtorqued it...and broke the threaded part.
is there a way I can replace this?
if so..please provide a pic and a write up.
I need help asap!!
its a 95 gsr

 

this is the stud thatis part of the intake manifold....and the nut is suppose to hold the fuel rail down...

 

help

 

What part did you break?



http://www.sonsacuraparts.com/...dIrno=

 

i think its 20...but im not too sure..i cant zoom the pic in.

its the stud that the fuel rail uses to bolt onto the manifold

 

theres suppose to be 3 of them holding the fuel rail in..

the stud is connect to the fuel rail...

heres a pic..

 

You need part 25, the M6x28 stud. P/n 92900-06028-0B. (The M6x43 stud is in the middle.) Any Honda or Acura dealer should have it. It should just unscrew.

 

most likly its not just gonna unscrew. so if it doesnt take some vise grips and clamp the f... outta the stud and try to loosen it .. gl

 

A stud remover might work too. There is less chance of breaking it further. This one is Craftsman.

 

anyone know the part number to this?



it goes on top of the injectors (that go into the fuel rail.)

i cant really tell from the parts pics..
im missing one...:[

i put a new stud in atfirst..and put my injectors in...and its squirting fuel outta the top of the injector...

i took the injectors out to take a look..and im missing ONE...

i then took a closer look at the rubber seal ontop of the injectors and some are ripped a bit...

now i gotta find another set of stock injectors..

ebay