Im was thinkin about getting the TSX TB for my car but i just recently found that spoon makes one for our cars also what do you guys think? heres a link to the spoon tb http://www.aj-racing.com/catal...age=1

 

I'd also like to know if theres any decent difference. The TSX tb at wholesale is about 150 cheaper than this.

 

i always wondered, is there any gains of having a tsxtb without any other mods?

 

For $600+ I would certainly like to know what kinds of gains I would be looking at.

Would an aftermarket TB affect the cruise control capability of our cars?

 

no it should not! the cost out ways any peformance gain from the TSX TB. acording to john @ hightech. he said that it's not worth the $ for what little bit you get if anything and you could lose low and mid range punch unless you were built for more air flow.

 

$600 is alot haha, hope they have sum new tsx at da junk yard. but would an aftermarket intake fit onto the TB?

 

I have heard rumors of the TL-S fitting

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">no it should not! the cost out ways any peformance gain from the TSX TB. acording to john @ hightech. he said that it's not worth the $ for what little bit you get if anything and you could lose low and mid range punch unless you were built for more air flow. </TD></TR></TABLE> really? i dont think it would lose any low or mid rage power with a reflash and supporting mods.

 

the fact that its the same price for canadian and american

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i-VTEC_DOHC &raquo;</TD></TR><TR><TD CLASS="quote">

the fact that its the same price for canadian and american

</TD></TR></TABLE>

AJ's USD prices fluctuate all the time based on the exchange rate. It used to be worth it to order from them. Blame our dollar...

 

k24a2 TB for the win. thats what i have been thinking of saving up to do for a while. it would help minimize DBW i believe...and it would be like driving a new car if you could change out your ecu or get K-PRO

 

well thats what the pro said! he know what he is talking about with years of R/D with K20's even with a reflash, cams, and custom header it did not make much diffrence when dyno'd. but you might might know something that john @ hightech does'ent know

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">well thats what the pro said! he know what he is talking about with years of R/D with K20's even with a reflash, cams, and custom header it did not make much diffrence when dyno'd. but you might might know something that john @ hightech does'ent know</TD></TR></TABLE>

Did you talk to John personally? Because you keep butchering his company's name. It is Hytech.

 

yes I have spoken with john a number of times. Im sure glad you know who they are know. apparently you learn something here on HT. but as far as butchering hytects name im sure every one that reads high tech / hytech knows what it is. it sounds the same either way you say it. what does talking to someone have to do with spelling something? sorry it bothers you the way I spelled it but if you feel the need to tell john that I spell the co name diff rant sometimes, go ahead im sure he wont lose any sleep over it!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">yes I have spoken with john a number of times. Im sure glad you know who they are know. apparently you learn something here on HT. but as far as butchering hytects name im sure every one that reads high tech / hytech knows what it is. it sounds the same either way you say it. what does talking to someone have to do with spelling something? sorry it bothers you the way I spelled it but if you feel the need to tell john that I spell the co name diff rant sometimes, go ahead im sure he wont lose any sleep over it! </TD></TR></TABLE>

its not a matter that you spelled it worng...

...its just kinda disrespectful in my eyes...

its kinda like calling me randrew instead of andrew...

EDIT: and spelling stuff right shows that you know what you are talking about

 

[QUOTE=TRAG]

its not a matter that you spelled it worng...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">yes I have spoken with john a number of times. Im sure glad you know who they are know. apparently you learn something here on HT. but as far as butchering hytects name im sure every one that reads high tech / hytech knows what it is. it sounds the same either way you say it. what does talking to someone have to do with spelling something? sorry it bothers you the way I spelled it but if you feel the need to tell john that I spell the co name diff rant sometimes, go ahead im sure he wont lose any sleep over it! </TD></TR></TABLE>

First of all, I didn't learn a damn thing about Hytech on here, that I didn't already know before joining HT.

My point is, you keep talking like you are buddies with John, but I call because you can't even spell his company's name correctly. I bet you've never even spoken to him.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TRAG &raquo;</TD></TR><TR><TD CLASS="quote">

its not a matter that you spelled it worng...

...its just kinda disrespectful in my eyes...

its kinda like calling me randrew instead of andrew...

EDIT: and spelling stuff right shows that you know what you are talking about</TD></TR></TABLE>

Exactly. If I owned Hytech, and someone was going around reppin' my company, and "quoting" me, I'd definitely want them to pronounce/spell/represent my company correctly.

 

did you put your tampon in the wrong hole or something! who cares what you think your nobody!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">did you put your tampon in the wrong hole or something! who cares what you think your nobody! </TD></TR></TABLE>

I couldn't care less what you think of me. I just can't stand fake people (a.k.a. you).

 

WTF is going on in here? What'd I miss?

I leave you people alone for 1 day and all hell breaks loose.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RICO_ &raquo;</TD></TR><TR><TD CLASS="quote">WTF is going on in here? What'd I miss?

I leave you people alone for 1 day and all hell breaks loose. </TD></TR></TABLE>

Hahaha. Yea, I was wondering where you were.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamanforlife &raquo;</TD></TR><TR><TD CLASS="quote">did you put your tampon in the wrong hole or something! who cares what you think your nobody! </TD></TR></TABLE>

And YOU need to calm down. NOBODY on this website is a "nobody". That's un-called for. They all have a point. If you're going to claim relations with a company or quote them....the least you could do is spell their name correctly.....that way someone doesn't mistakenly look up the wrong company.

For all you know...."Hightech" could be a completely different company that actually exists.

 

does anybody have any real evidence, either way? i was looking into the tsx throttle body about 6 months ago, and couldn't find much. nobody here had anything to say about it either. has anyone seen any results from such a set up?

 

e-thuggin.