Prototype S2000 Exhaust for cheap...or two universal mufflers =P
Thread Starter
PHANTOM MENACE
iTrader: (2)
Joined: May 2005
Posts: 6,042
Likes: 3
From: SYCUAN NINE, CA, USA
Prototype S2000 Exhaust for cheap...or two universal mufflers =P
<FONT SIZE="15">SOLD SOLD SOLD!!!</FONT>
Up for sale is a prototype twin canister exhaust system for an early model AP1 S2000. Pictures speak a thousand words. Only thing wrong is the right side muffler sits slightly lower and I believe slightly off center (about an inch, see pics below). Easy fix, cut the hangers off and weld in new ones at your local muffler shop. Other than that, everything bolts up fine and will include silencers for each side. Piping is 2.5 OD, 2.25 ID. I have a hunch that a smaller rubber piece for the hanger could possibly solve the problem but I wasn't able to test the theory so whatever. I'm also willing to part out each muffler separately as universal mufflers if I can find a buyer for each one.
Open to all reasonable offers at this point, willing to deliver if needed to SD/OC/LA/IE for the cost of gas and a cheap lunch...at Sonic LOL.
Modified by 24TEN at 2:14 AM 3/18/2008
Up for sale is a prototype twin canister exhaust system for an early model AP1 S2000. Pictures speak a thousand words. Only thing wrong is the right side muffler sits slightly lower and I believe slightly off center (about an inch, see pics below). Easy fix, cut the hangers off and weld in new ones at your local muffler shop. Other than that, everything bolts up fine and will include silencers for each side. Piping is 2.5 OD, 2.25 ID. I have a hunch that a smaller rubber piece for the hanger could possibly solve the problem but I wasn't able to test the theory so whatever. I'm also willing to part out each muffler separately as universal mufflers if I can find a buyer for each one.
Open to all reasonable offers at this point, willing to deliver if needed to SD/OC/LA/IE for the cost of gas and a cheap lunch...at Sonic LOL.
Modified by 24TEN at 2:14 AM 3/18/2008
Trending Topics
* B A N N E D *
Joined: Nov 2007
Posts: 776
Likes: 0
From: BITCHASSNESS Capital SO, CAL
Re: (Opossum Jenkins)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Opossum Jenkins »</TD></TR><TR><TD CLASS="quote">Sonic 
never tried it yet.. </TD></TR></TABLE>
You're missing out!
never tried it yet.. </TD></TR></TABLE>You're missing out!
Re: (Thrizzle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Thrizzle »</TD></TR><TR><TD CLASS="quote">
You're missing out! </TD></TR></TABLE> alright..that is it... i am going !
You're missing out!
</TD></TR></TABLE> alright..that is it... i am going !
