*Stock OBD2 GSR ecu-50
*K&N air filter-10
*Complete Turbo Kit brand NEW w/GT35R.-2200
*GT35R/.70ar NEW-950
*Skunk2 turbo cams NEW-450
*Exedy full face sprung clutch, used but in great condition-200 obo
*Unorthadox Racing pulleys spec R-150
*Mr.Gasket exhaust cut out-40
*New Quaife LSD ITR/B16 with new honda bearings-800
*Quaife LSD slightly used gsr with new honda bearings-750
*Oil catch cans, I have 2, 1 with a visual meter-30 each
*2 gsr starters-40 each
*2 B16/ITR distributers 1 with msd nipple-120 each
*AEBS pro spec gsr Head studs NEW-90
*ARP gsr main studs NEW-90
*Skunk2 stage2 cams and gears-550 or 450 cams and 125 gears
*Cometic 86mm headgasket NEW-80
*Cometic 86.5mm headgasket NEW 80
*ACL bearing kit for gsr-100
*GSR timing belt NEW-40
*OBD2 conversion harnes to OBD1- 80
*Golden Eagle cam cap NEW-10
*RC 550cc injectors with stock fuel rail-225
*STR pro series anodized blue fuel rail NEW-80
*GSR crank pulley-25
*68mm Throttle body with all sensors-250
*NGK pro spec iridium spark plugs 9's 2 sets NEW-20
*GSR water pump neck- make offer
*GSR shift linkage with type R shift ****-80
*JUN3 stage3 cam copies tested back to back with real JUNS and produced the same #'s-350
*cam caps and cam rails with all necassary head bolts-make offer
*GSR windage tray-make offer
*Mugen Jasma header, slight damage on bottom fixable with o2 sensor-350
*2000 ITR JDM headers with custom skid plate to protect the bottom with o2 sensor-350
*GSR half shaft- make offer
*Sparco replica steering wheel-30
* Advanced Competition Intake manifold Great for High HP All Motor cars or Turbo- Retail, 950/ sale 450
*JG Edlebrock Intake mainfold-150-SOLD
*Skunk2 Intake manifold- 100-SOLD
*2000si B16 tranny Quaife lsd with new honda bearings, ITR final drive kit, ats first gear, tranny is perfect-1400. Keep in mind how much labor went into this.
*93 gsr Cable tranny rebuilt by Erick's Racing Perfect condition-600
*Darton tall deck gsr block deck height 226mm sleeved and ready to go-Retail $2199/ asking1500
*GSR block restamped b16 for street racing purposes, Sleeved with 86.5mm wiesco pistons lateral gas ports, and 95mm custom crank, IB spec rods. I will sale assembled or I can part it out. Everything in the block is brand new and has never been run.-2200
*Portflow B16 head, Made 250whp on a basic gsr 12.5:1comp setup, I have vouches Head has Valves, springs, retainers, guides. Cams and Gears are optional-1200
*GSR portflow head, valve springs, retainers, guides-900
*J.E Pistons 9:1comp NEW-375
*Crower Rods specifically for a 95mm crank in a Bseries AllMotor or Turbo use NEW-280
*5GAL barrel or c16 race fuel-70
*TILTON TWIN DISC with 6.5 pound custom tilton flywheel NEW-1200
*MOMO Extreme Formula seats oneis carbon kevlar the other is fiber glass, NEW-600 each
*MOMO 3inch wide 6 point seatbelt harness with MOMO shoulder pads 2 sets-175 each
*Sabelt harness-40
*MOMO harness 2 sets-40
*2000 si rear suspension, rotors, calipers. arms-100
*All types of interior pieces for integra, eg, and 2000 si. Make offers
*ITR strut bar-100
*Full race cross member traction bar, NEW-270
*EG Lakewood cross member traction bar, NEW-250
*Mugen twin loop with cat back piping for a 2000 si with 02 sensor-500
*2 rear hatch doors one is cut for weight-20 each
*Moto GP full racing leather suit with rear hump, Moviestar/telefonica-500
*2000 Acura integra gsr doors, black leather panels, frost white perfect condition-200
*Civic eg hood off 92 cx, couple tiny dings-30


Everything is negotiable. Call 949-500-8662 ask for Ken or you can e-mail me @ OnceMariposa@gmail.com< I check my mail about 5 times a day!

Thankyou for l@@king.

 

PM'd

 

Im not sure what the deal is with my pm's but they never come up? Feel free to call or email me, if that's to much of a hastle you can hit me threw the post, thanks for looking.

 

Im at work now so I cannot call.
Try clicking the "IM" under my Avatar, see if it comes up.
I asked you if you're interested in trades.

 

email sent.

 

ill tkae that cam cap for 10 shipped pm me

 

Checked email, nothing?

 

Give me your info and address, I'll give you paypal accnt info

 

Nice parts!

 

pm'd

 

U Down w/Trades 4 the B16 Trans. LSD?

 

dont recieve pms for some reason, u can email or feel free to call or use thread.

 

need cash unfortunately.

 

U have alot of nice stuff man. PM'd...

 

how much for mugen jasma header shipped to 94538?

 

damn baller.

 

wish i could fawkin sell some **** so i could buy yours lol

 

I'm in New York until the 9th but I will do my best to still communicate with u guys.

MY PM'S DONT WORK- EMAIL ME PLEASE.

 

bump for good stuff...

 

still have the "GSR crank pulley-25"? is this the timing belt drive pulley, the gear that goes on the end of the crank, outside the oil pump? please let me know ASAP, thanks!

jo
913-687-2044

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kennethAlexanderINC &raquo;</TD></TR><TR><TD CLASS="quote">I'm in New York until the 9th but I will do my best to still communicate with u guys.

MY PM'S DONT WORK- EMAIL ME PLEASE.</TD></TR></TABLE>

 

you don't feel like shipping that hood do ya? if so lmk what kind of prices I may be lookin at. It'd only be going to Phoenix AZ so it can't be too bad.

 

i am interested in the GSR Quaife...email me at gregkolek@yahoo.com if still for sale

 

nice stuff bro

 

bump, waiting for a response