WTB: Labor for Motor Install/Swap in 714/949 area
Thread Starter
Honda-Tech Member
Joined: Feb 2000
Posts: 336
Likes: 0
Done.
I'm around the Fountain Valley/Garden Grove/Irvine area. I have an EG with a B20 and a DC with the stock LS motor. I want to swap my B20 /w tranny from my EG into my DC. I don't really have time to do this myself anymore and I sold my cherry picker a long time ago so I just wanna pay someone who has the tools to do it for me. Was hoping I didn't have to take it to a store and get *** raped on labor charges. Anyone want to make some money and do it for me? I can take a day off of work and help out (I did like 3 motor swaps 7 years ago so I'm a bit rusty on the process, but I can still do some grease work).
So break down is:
1) Pull B20 /w tranny from EG
2) Pull B18 /w tranny from DC
3) Swap in B20 /w tranny into DC
4) I get EG towed home and put the B18 /w tranny on my truck and drive it home. (Or if you want, we can do it at my house (Either my house in Fountain Valley or my house in Garden Grove - I have a truck with a lift gate so I can bring your cherry picker/tools to my place)
Details:
EG has no AC so it should be very easy to pull since there is a lot of room. DC still does have AC and P/S so will take little more work to put the condenser/ps pump and belts on. Both cars are OBD I so no rewiring or anything. In fact we don't have to touch the ECU at all as they are the same.
Please email me at tr0ll@innocent.com (0 is a zero) or PM me here if you are willing to do it.
Been getting a lot of PMs ranging from $300-$750. I'm looking to pay $300-$400. Also, it has to be in 714/949 area. Riverside/Corona/Other borderline OC cities are too far to get my car towed unless you are willing to come to my house and do the swap. Remember, you are pulling 2 motors, and only installing 1. This Sunday is my deadline, if I don't find someone by then, I'm just going to bring it to a shop. Thanks!
Done by Flatbush Projects. Thanks!
Modified by Tr0LL at 7:07 PM 3/9/2008
So break down is:
1) Pull B20 /w tranny from EG
2) Pull B18 /w tranny from DC
3) Swap in B20 /w tranny into DC
4) I get EG towed home and put the B18 /w tranny on my truck and drive it home. (Or if you want, we can do it at my house (Either my house in Fountain Valley or my house in Garden Grove - I have a truck with a lift gate so I can bring your cherry picker/tools to my place)
Details:
EG has no AC so it should be very easy to pull since there is a lot of room. DC still does have AC and P/S so will take little more work to put the condenser/ps pump and belts on. Both cars are OBD I so no rewiring or anything. In fact we don't have to touch the ECU at all as they are the same.
Please email me at tr0ll@innocent.com (0 is a zero) or PM me here if you are willing to do it.
Been getting a lot of PMs ranging from $300-$750. I'm looking to pay $300-$400. Also, it has to be in 714/949 area. Riverside/Corona/Other borderline OC cities are too far to get my car towed unless you are willing to come to my house and do the swap. Remember, you are pulling 2 motors, and only installing 1. This Sunday is my deadline, if I don't find someone by then, I'm just going to bring it to a shop. Thanks!
Done by Flatbush Projects. Thanks!
Modified by Tr0LL at 7:07 PM 3/9/2008
Re: WTB: Labor for Motor Install/Swap in 714/949 area (eg6low-buck)
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Solo2Vtec
Honda Civic / Del Sol (1992 - 2000)
6
May 28, 2002 06:35 PM