Hello, I have a 00' H22 PDE head that came with these cams and was wondering if anybody could help me identify them.

Intake Cam:


The "G"


The "M"

Exhaust Cam:


The "K"


The Other "M"

Each of the letters are located 180* degrees on the other side of each other.





Modified by trooper0641 at 2:45 AM 2/22/2008

 

ttt

 

look at the end of the cams. the exhaust cam has a spot where it hooks up to the distributor

 

pretty sure you need to measure the lobe height, i have a pile of stock cams and one of them is a type-s cam but you cannot tell by looking or by casting marks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by v4lu3s &raquo;</TD></TR><TR><TD CLASS="quote">pretty sure you need to measure the lobe height, i have a pile of stock cams and one of them is a type-s cam but you cannot tell by looking or by casting marks.</TD></TR></TABLE>
so the letter matching means nothing? i have to measure the lobe height and match it's duration to the cam specs?

 

sorry i reread your posting. my bad

 

oops double post

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sup3rd &raquo;</TD></TR><TR><TD CLASS="quote">oops double post</TD></TR></TABLE>
haha bummp

 

up for some help

 

bbubmppp

 

get a set of calipers and measure the max on the VTEC lobe.

 

It's been covered many times before. You have to measure the lobe height. Casting marks don't mean squat.