FS: Low comp Wiseco 81.5mm Pistons *NEW*
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 451
Likes: 0
From: Birthplace of Rust, Michigan, USA
FS: Low comp Wiseco 81.5mm Pistons *NEW*
*** SOLD! ***
For sale is a set of Wiseco pistons part# K541M815. They are 81.5mm and include rings, wrist pins, and clips. They were installed in a freshly bored block and then removed because I'm no longer going turbo.
The compression ratio of these pistons depends on your specific application. You need to go to Wiseco's site and get the pistons specs and then plug all of your information into a good compression calculator like the one at http://www.zealautowerks.com
Here, I'll even link you right to the PDF on Wiseco's site that has the info.
http://www.wiseco.com/PDFs/Cat...a.pdf
Price: $SOLD shipped *CONUS ONLY!*
Please ignore the rods in the pictures, they are sold.
I will entertain trades for any the following items:
Ported LS head
Crower or Supertech LS valvetrain
Crower LS cams (403 or 404 only)
Modified by sph33r at 12:28 AM 2/26/2008
Modified by sph33r at 12:29 AM 2/26/2008
Modified by sph33r at 11:57 AM 2/29/2008
For sale is a set of Wiseco pistons part# K541M815. They are 81.5mm and include rings, wrist pins, and clips. They were installed in a freshly bored block and then removed because I'm no longer going turbo.
The compression ratio of these pistons depends on your specific application. You need to go to Wiseco's site and get the pistons specs and then plug all of your information into a good compression calculator like the one at http://www.zealautowerks.com
Here, I'll even link you right to the PDF on Wiseco's site that has the info.
http://www.wiseco.com/PDFs/Cat...a.pdf
Price: $SOLD shipped *CONUS ONLY!*
Please ignore the rods in the pictures, they are sold.
I will entertain trades for any the following items:
Ported LS head
Crower or Supertech LS valvetrain
Crower LS cams (403 or 404 only)
Modified by sph33r at 12:28 AM 2/26/2008
Modified by sph33r at 12:29 AM 2/26/2008
Modified by sph33r at 11:57 AM 2/29/2008
Trending Topics
Honda-Tech Member
Joined: Jun 2002
Posts: 7,942
Likes: 0
From: Destroying turbo ITR motors in Minneapolis, MN, U.S.A.
Re: (sph33r)
Any pics of the sides/skirts of the pistons?
Are the Wiseco rings brand new in the packaging?
Are spiral locks included (if they come with them)?
I'm no engine builder, but I'm just asking to make sure they come with everything that they'd come with new.
Are the Wiseco rings brand new in the packaging?
Are spiral locks included (if they come with them)?
I'm no engine builder, but I'm just asking to make sure they come with everything that they'd come with new.
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 451
Likes: 0
From: Birthplace of Rust, Michigan, USA
I can get any pictures you need. I've been meaning to get updated ones off the rods anyway.
The rings are new but on the pistons as you can see in the pictures. These were installed in a shortblock and then taken out. They were never actually used. Basically I pulled them out of the engine, took the rods off, and they'll come with all the rings, wrist pins, circlips, etc that were already installed in the engine when I got it.
I'll try to grab some new pictures tonight when I'm at the garage.
The rings are new but on the pistons as you can see in the pictures. These were installed in a shortblock and then taken out. They were never actually used. Basically I pulled them out of the engine, took the rods off, and they'll come with all the rings, wrist pins, circlips, etc that were already installed in the engine when I got it.
I'll try to grab some new pictures tonight when I'm at the garage.
Thread
Thread Starter
Forum
Replies
Last Post
sph33r
Classifieds: Forced Induction
13
Feb 28, 2008 01:51 PM