so ive searchedd around, and i get alot of **** about how you can use 91 to 93 gsr axles. but than there was a few other guys that said i need one from the 93 and the other from the 94 to 97. which doesnt make any sence to me, so if anyone else has done this swap let me know what you actually have to do. thanks

 

You need the axles from a 90-93 non-ABS with corresponding half-shaft. Don't forget to remove the dust guards

 

i the used axles and half shaft from the 96 teg i pulled the ls swap from.

 

what do you mean dust gaurd? will the axles rub if i dont take em out?

 

i used 89 teg b16 axles. they fit perfect and are the perfect length. they are in my car now. if you have any questions just pm me.

 

90-93 ls axles but if you dont have an si you will need hubs too

 

you just need 90-93 integra axles non abs, it doesnt matter if you have a dx or si....the std's have smaller hubs.

 

aright thanks homies...its a dx so i should be in the clear..suprisingly that car has less underbody rust then my ek that i paid 5 g's for, and i only paid 100 for the hatch with a bad head gasket.