Koni, Ground Control, Extended Top Hats, Mugen S1 Seat, Drive Master Cylinder Brace
Suspension has been sold, the Mugen S1 seat and the Drive MC brace are still available.
These shocks are almost new, they were on the car for a very short time, they don't fit my long-term goals so I've removed them.
These were on the car for less then 100 miles.
'92-95 Civic EG
'92-01 Integra DC2/4
4 - Koni “yellow” shocks - OTS
4 – Ground Control “coil overs”
2 – 550 lbs/in front springs, 7", 2.5"
2 – 650 lbs/in rear springs, 8", 2.5"
4 – Ground Control Extended Top Hats
$950 Shipped - Sold
Drive Master Cylinder Brace - $75 shipped
'92-95 Civic EG
Installed on the car, then removed by the previous owner.
.jpg)
.jpg)
Mugen S1 Seat with the Mugen Seat Rail Kit, driver's side(US) for the Civic/Integra
The seat is in mint condition as can be seen in the pictures below.
When the seat was ordered it took ~4 months for the seat to arrive and ~6 months for the rails to arrive.
The seat was purchased a couple of years ago and installed in an Integra Type-R that sat in the garage, the seat has very little "seat time" in it.
When the seat was purchased it was purchased at the suggested retail, the retail price of the seat, prior to shipping and any applicable taxes is $968, the Mugen Seat Rail kit is $325, a total of $1293 prior to shipping and any applicable taxes.
I'm asking for $1,100 or Best Offer for the Mugen S1 seat <u>and</u> Mugen Seat Rail Kit.
Click on the pictures below for high resolution versions of the pictures
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Modified by Austin at 9:21 AM 2/28/2008
These shocks are almost new, they were on the car for a very short time, they don't fit my long-term goals so I've removed them.
These were on the car for less then 100 miles.
'92-95 Civic EG
'92-01 Integra DC2/4
4 - Koni “yellow” shocks - OTS
4 – Ground Control “coil overs”
2 – 550 lbs/in front springs, 7", 2.5"
2 – 650 lbs/in rear springs, 8", 2.5"
4 – Ground Control Extended Top Hats
$950 Shipped - Sold
Drive Master Cylinder Brace - $75 shipped
'92-95 Civic EG
Installed on the car, then removed by the previous owner.
.jpg)
.jpg)
Mugen S1 Seat with the Mugen Seat Rail Kit, driver's side(US) for the Civic/Integra
The seat is in mint condition as can be seen in the pictures below.
When the seat was ordered it took ~4 months for the seat to arrive and ~6 months for the rails to arrive.
The seat was purchased a couple of years ago and installed in an Integra Type-R that sat in the garage, the seat has very little "seat time" in it.
When the seat was purchased it was purchased at the suggested retail, the retail price of the seat, prior to shipping and any applicable taxes is $968, the Mugen Seat Rail kit is $325, a total of $1293 prior to shipping and any applicable taxes.
I'm asking for $1,100 or Best Offer for the Mugen S1 seat <u>and</u> Mugen Seat Rail Kit.
Click on the pictures below for high resolution versions of the pictures
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Modified by Austin at 9:21 AM 2/28/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek_b16 »</TD></TR><TR><TD CLASS="quote">YOu willing to part the top hats and grond controls??</TD></TR></TABLE>
Top Hats are a part of the complete suspension, I'm not planning on splitting them up separately.
Top Hats are a part of the complete suspension, I'm not planning on splitting them up separately.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAV3RiCK478 »</TD></TR><TR><TD CLASS="quote">are you looking for trades on the suspension?</TD></TR></TABLE>
Depends upon what you have, but I'm selling this suspension off so that I can purchase a set of the Koni 8041 RACE, or the 3011's for use in the race car, other then that I'm buying safety gear for the track car, not sure what you'd have to offer.
Depends upon what you have, but I'm selling this suspension off so that I can purchase a set of the Koni 8041 RACE, or the 3011's for use in the race car, other then that I'm buying safety gear for the track car, not sure what you'd have to offer.
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAV3RiCK478 »</TD></TR><TR><TD CLASS="quote">ITR cusco zero2 coilovers with rear LCA's</TD></TR></TABLE>
Sorry mate, I currently have a Zeal B6 suspension on the car, which will go back to my street car when I can obtain a race suspension.
Sorry mate, I currently have a Zeal B6 suspension on the car, which will go back to my street car when I can obtain a race suspension.
no prob. if i can ever sell my setup and if yours is still available i'll buy yours.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAV3RiCK478 »</TD></TR><TR><TD CLASS="quote">no prob. if i can ever sell my setup and if yours is still available i'll buy yours.
</TD></TR></TABLE>
No problem at all.
</TD></TR></TABLE>No problem at all.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin »</TD></TR><TR><TD CLASS="quote">The suspension is pending a sale on Wednesday.</TD></TR></TABLE>
So are you holding these til Wednesday?
If they flake out LMK
Thanks!
So are you holding these til Wednesday?
If they flake out LMK
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaTechdotcom »</TD></TR><TR><TD CLASS="quote">
So are you holding these til Wednesday?
If they flake out LMK
Thanks!
</TD></TR></TABLE>
Yep, they're planning on meeting me on Wednesday afternoon to pick up the suspension, but if it falls through I'll let you know.
Sure you don't want a Mugen S1 seat? :D
So are you holding these til Wednesday?
If they flake out LMK
Thanks!
</TD></TR></TABLE>Yep, they're planning on meeting me on Wednesday afternoon to pick up the suspension, but if it falls through I'll let you know.

Sure you don't want a Mugen S1 seat? :D
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin »</TD></TR><TR><TD CLASS="quote">
Sure you don't want a Mugen S1 seat? :D</TD></TR></TABLE>
No thanks... Just looking for a suspension setup for now
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin »</TD></TR><TR><TD CLASS="quote">
These were on the car for less then 100 miles.
</TD></TR></TABLE>
Track miles or street?
Thanks!
Sure you don't want a Mugen S1 seat? :D</TD></TR></TABLE>
No thanks... Just looking for a suspension setup for now
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Austin »</TD></TR><TR><TD CLASS="quote">
These were on the car for less then 100 miles.
</TD></TR></TABLE>
Track miles or street?
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HondaTechdotcom »</TD></TR><TR><TD CLASS="quote">
Track miles or street?
Thanks!
</TD></TR></TABLE>
They were at Reno-Fernley and Thunderhill for a total of ~6 - 20 minutes sessions by the prior owner, no curb hopping, no offs, just normal driving.
Track miles or street?
Thanks!
</TD></TR></TABLE>
They were at Reno-Fernley and Thunderhill for a total of ~6 - 20 minutes sessions by the prior owner, no curb hopping, no offs, just normal driving.


