PICS PAGE 2 !!!

so i brought my car to the carwash and long story short 4 hours afterwards my clutch takes a **** on me ,
apparently 4 puck unsprung clutches arent very jared-friendly . this is the second time ive done this .
the hub seperated from the actual disk .
Miller from NRGTech Racing in NY is hookin it up and fixin all my crap for me ,
for starters a new act 6 puck , lets see how many months this one lasts
my ITR Intake Manifold is a little messed up from the nitrous jets , ( slight leak )
so instead of fixing it im going with a jg edelbrock manifold , itll make some more power up top .
along with tapping the new jg mani for direct port also .
a few minor oil leaks , gaskets and what not .
compression check ( i have been runnig the car up here in NY winter , meanwhile it was tuned in Florida summer.
possible very minor headgasket leak , if so replace that as well
then to tune my baby tomorrow .

im not dumb , so i wont post exact specs ,
but heres what i will say

2.0L high compresson all motor nitrous car.

should be interesting to see what miller can pull out of it .

NRGTech Racing has been known to pull some insane #'s out of cars , so i can't wait!!

so stay TUNED , tomorrow i will post pics , and some dyno #'s for you guys .
if i know you , and you know me well enough to know that i WILL tell YOU what my setup is , and you want to know, then ask and ill pm you my current EXACT specs .

Thanks !!!! -- Jared 00-501ITRSpec


Modified by 00-501itrspec at 9:48 AM 2/7/2008


Modified by 00-501itrspec at 10:05 AM 2/7/2008

 

NRG knows there ****. As for the 4 puck, are you running that type of power to even have a 4 puck ? Usually 6 is enough.

 

around 450 on spray

 

im so excited i cant sleep at all , im a lil nervous bout blowing up on the dyno

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">around 450 on spray </TD></TR></TABLE>

Holy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soulrider4ever &raquo;</TD></TR><TR><TD CLASS="quote">

Holy</TD></TR></TABLE>

all motor nitrous car , where ya at Doostur ??

i might leave the jets around a 120 shot vs a 180 , ive been real nervous all night about a 200 direct , plus i still have the small solenoids , so i cant run much more than 160 anyways .

ill have a biiiiggggg smile on my face if its 400 , ill get hard from 450 tho

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">

all motor nitrous car , where ya at Doostur ??

</TD></TR></TABLE>

O no, he's calling me out! Unfortunately I wont be posting any results or pictures of my car till early april. When I get back the car has to go through alot of changes and assembling. After its all together I'm heading down for my final tune. My numbers will be determined by what clutch I decide to put in. Twins are a pain to drive with.

*Note: I make your power goals are 1/3 my total boost without spray (I drink juicy juice too)

Will you be at the expo?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur &raquo;</TD></TR><TR><TD CLASS="quote">

*Note: I make your power goals are 1/3 my total boost without spray (I drink juicy juice too)

Will you be at the expo?</TD></TR></TABLE>

Expo , of course

you know how the boost vs all motor goes , but with the #'s you pm'ed me with i may just shut up now

i love losing races , its inspiration for me , if i dont sell my R for a RHD one , im gonna boost next summer

hurry up ad get back to this side of the pond so we can play

EDIT F A H Q , i diddnt know your sprayin also , you suck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">

i love losing races , its inspiration for me , if i dont sell my R for a RHD one , im gonna boost next summer

hurry up ad get back to this side of the pond so we can play </TD></TR></TABLE>

I don't even race or track really. I just do it for fun, and seeing how far I can go before I break something. Its a 24/7 learning experience! Will definately have to take me for a spin at the expo though.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur &raquo;</TD></TR><TR><TD CLASS="quote">

Will definately have to take me for a spin at the expo though.</TD></TR></TABLE>

you BETTER have 2 seats in your car , or i will put my pass seat in to take a ride

friggen turbo guys , i just wanna max out my all motor capabilities on the street , then 35R for me , mmmmgood

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">
then 35R for me , mmmmgood </TD></TR></TABLE>

2.0 + GT 35R =

My car has full interior, no worries.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur &raquo;</TD></TR><TR><TD CLASS="quote">

2.0 + GT 35R =

My car has full interior, no worries.</TD></TR></TABLE>

good stuff , now my question , what are you bringin me from japan ?

EDIT , can you find good udon noodles , ill pay for shipping and all

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">

good stuff , now my question , what are you bringin me from japan ?

EDIT , can you find good udon noodles , ill pay for shipping and all </TD></TR></TABLE>

I'll bring you a jar of sand that you could sprinkle on your floor mats and call it JDM...

 

peeeerrrrfceeeccttttt

 

Jared... No comment! I don't want to start any sh*t! Dooshy... I'll be in the passenger seat! Can't wait!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sheekdude &raquo;</TD></TR><TR><TD CLASS="quote">Jared... No comment! I don't want to start any sh*t! Dooshy... I'll be in the passenger seat! Can't wait!!!</TD></TR></TABLE>

i have a feeling i messed with the wront H-T'er ,

its all good tho , ill win

its all fun to me , you all know that .

 

bring that nitrous trash upstate so i can teach you a lesson

why are you running an 4 puck unsprung disk??? bro i make more power than that and my 6 puck sprung disk is very comfy and easy on the street and trust me i beat the **** out of it.

 

i have no idea , on my last build i told them to do a clutch , and thats what went in

im going 6 puck now so it should be a little better

IIRC you owe me a drive down for missing that meet last month

Bring it .

 

I just picked up my car from NRG, hope my oil problems are fixed, saw 2 type r's there, one being dynoed and one wingless outside.... I think my clutch or flywheel is going, looks like I will need miller to change that soon....

 

Pm'd Jared.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AW &raquo;</TD></TR><TR><TD CLASS="quote">I just picked up my car from NRG, hope my oil problems are fixed, saw 2 type r's there, one being dynoed and one wingless outside.... I think my clutch or flywheel is going, looks like I will need miller to change that soon....</TD></TR></TABLE>

that wingless would be mine , i took her home tho , pumpin out 212 , with no cam adjustments , and mt nitrous jets were all screwed so we scrapped that for today .


nitrous tune this week tho for sure

PICS AND VIDEOS TOMORROW

 

BTW : lovin the 6 puck

 

Turbos, lol.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by neo_ &raquo;</TD></TR><TR><TD CLASS="quote">Turbos, lol. </TD></TR></TABLE>

hehehehe , i love you so much , finish yer car and come play for a month up here

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00-501itrspec &raquo;</TD></TR><TR><TD CLASS="quote">

you BETTER have 2 seats in your car , or i will put my pass seat in to take a ride

friggen turbo guys , i just wanna max out my all motor capabilities on the street , then 35R for me , mmmmgood </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Doostur &raquo;</TD></TR><TR><TD CLASS="quote">

I don't even race or track really. I just do it for fun, and seeing how far I can go before I break something. Its a 24/7 learning experience! Will definately have to take me for a spin at the expo though.</TD></TR></TABLE>

Are you guys coming to expo to track these supa cars? Or just gonna watch