So here it is im planning to install my JDM FRONT END, Install my TYPE R DOORS and Change the whole SUSPENSION and SHAVE MY QUARTER PANEL MOLDING HOLES..
I wouldnt have done all the work with out the HONDA-TECH PEOPLE!

So here it is My JDM Front end


here is the current look of my car

Passenger Type R door Installed and i know i still need to fix that dent..

Had to bring the car cuz started raining really hard

Finished Working on Driver side Type R Door

Even Installed the Fenders

 

I will update it AS SOON AS POSSIBLE!

 

here are the rims im planning to use

suspension

 

whats different about type r doors other than they dont have a molding?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cruizin01 &raquo;</TD></TR><TR><TD CLASS="quote">whats different about type r doors other than they dont have a molding?</TD></TR></TABLE>

the wirings are different.. i would rather have the type r door wit no moldings rather than paying so much money to get it shave.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC2FRMDABAY &raquo;</TD></TR><TR><TD CLASS="quote">

the wirings are different.. i would rather have the type r door wit no moldings rather than paying so much money to get it shave.</TD></TR></TABLE>

why? dont you want a clean ride and do it yourself? either way you are going to pay. its really not that expesive to shave yourself...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEC_PRODUCTION &raquo;</TD></TR><TR><TD CLASS="quote">

why? dont you want a clean ride and do it yourself? either way you are going to pay. its really not that expesive to shave yourself...</TD></TR></TABLE>

u know wat i actually found a guy that does a body work and hes charging me $200 to fix the passenger and quarterpanel fix and the moldings on both sides so i think thats a good deal...

 

how are you going to get that tien suspension to work, if you are using the 1's pictured......

 

what do u mean 1st pictured?

 

i hope those arent the exact shocks ur using in the picture because that will not fit unless u doing something custom **** to it lol

 

not 1st pictured, the one's pictured, that tien suspension you have a picture of looks like its from a nissan 240sx, and not a dc2


Modified by ironcheftony at 3:55 PM 2/5/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ironcheftony &raquo;</TD></TR><TR><TD CLASS="quote">not 1st pictured, the one's pictured, that tien suspension you have a picture of looks like its from a nissan 240sx, and not a dc2


Modified by ironcheftony at 3:55 PM 2/5/2008</TD></TR></TABLE>

ownd! trying to show off stuff thats what i think...200 is not a good deal for just fixing dents. im sorry. especially if he is your boy

 

LOL! hmmmmm, something aint right...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTEC_PRODUCTION &raquo;</TD></TR><TR><TD CLASS="quote">

ownd! trying to show off stuff thats what i think...200 is not a good deal for just fixing dents. im sorry. especially if he is your boy</TD></TR></TABLE>

if u dont believe me then here it is, read it from the buttom! what a deal huh




-------------- Original message --------------
From: &lt;da_rickmeister12@yahoo.com&gt;
so $200.00 for the holes and dents right?

TOMFREMONT4444@comcast.net wrote:

I FIRST PUT PLASTIC SCREEN, AND THEN FILL
THEM IN WITH BONDO, SAND THE SMOOTH
AND THEN PRIME THEM.
IF YOU WANT IT DONE IN THE MORNING CALL
ME. (510)290-8055 TOM.


-------------- Original message --------------
From: &lt;da_rickmeister12@yahoo.com&gt;
one quick question bout those holes.. are u going to put some weld and grind it until its smooth or just some bondo?

tomfremont4444@comcast.net wrote:

TOM HERE:
YES, I CAN REPAIR THE DENTS, AND FILL IN
THE HOLES ON THE TWO PANELS. FOR ABOUT
$200. I DO NOT PAINT, BUT I DO HAVE SOME
WHITE PRIMER THAT I WILL APPLY ON THE AREA
THAT I REPAIR. I CAN DO THE WORK IN THE
MORNING FOR YOU. IF YOU WANT.
CALL ME (510)290-8055 TOM, THANKS


-------------- Original message --------------
From:&lt;da_rickmeister12@yahoo.com&gt;
well, id like to get my dents fix and how much do u charge? can u guys fill the quarter panel molding holes? most of the dents are on the driver side door and passenger rear and quarter panel.. here are some pics



From: &lt;da_rickmeister12@yahoo.com&gt;
To: TOMFREMONT4444@COMCAST.NET
Subject: how u doing?
Date: Tue, 5 Feb 2008 01:52:42 +0000

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22APrelude &raquo;</TD></TR><TR><TD CLASS="quote">i hope those arent the exact shocks ur using in the picture because that will not fit unless u doing something custom **** to it lol</TD></TR></TABLE>

omg thank you for noticing that, my younger brother bought from ebay.. i guess imma have to replace it...

 

i never said you were lying. i just said thats pretty good money from them. ****

 

ok!

 

I wouldnt' do business with a guy who only knows how to type in caps.

Oh and no matter what you do to your LS (type-r doors, jdm front). It won't be a type-R.
-Rik

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rikter &raquo;</TD></TR><TR><TD CLASS="quote">I wouldnt' do business with a guy who only knows how to type in caps.

Oh and no matter what you do to your LS (type-r doors, jdm front). It won't be a type-R.
-Rik</TD></TR></TABLE>

I never said i that my car will ever be a TYPE-R.. wat im saying is i would rather have the TYPE-R door cause u dont have to put any bondo or anything like that... u got it MR.Riker

 

 

niiiiiiice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC2FRMDABAY &raquo;</TD></TR><TR><TD CLASS="quote">

TOMFREMONT4444@comcast.net wrote:

I FIRST PUT PLASTIC SCREEN, AND THEN FILL
THEM IN WITH BONDO, SAND THE SMOOTH
AND THEN PRIME THEM.

</TD></TR></TABLE>

wtf is plastic screen? if he aint gonna weld it then i wouldnt go to him but nice project btw

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2oh6civic &raquo;</TD></TR><TR><TD CLASS="quote">

wtf is plastic screen? if he aint gonna weld it then i wouldnt go to him but nice project btw</TD></TR></TABLE>
haha that, i dont know... ive never heard of it before but oh well.. i gotta try it somehow

 

 

ok so now im in the proces of taking out my ls radiator support and its actually harder than i thought or i just didnt do it right..hhehehe




Ok so now didnt actually finish taking it out but i hope i finish it 2morrow
here is ther progress






Now, my question is.. IS THERE A BETTER WAY TO DO IT or TECHNIQUE cuz im having a hard time taking it apart..