Do you have a swap done but can't find the time to maintain it? Wish you had a Sunday off where you didn't have to work on your car? Did you just buy that suspension kit for your car but haven't installed it because you cant find time to do it?

If you answered yes to any of these questions then PM me! I do all different kinds of mechanical services servicing hondas/toyotas to audi/bmw. If you need a little background on my experience here's a quick recap...

2 years of technical training becoming certified Honda technician with strong emphasis in the field of suspension and brakes
2 years as a technician/sales for America's Tire with emphasis on diagnosing and correcting tire and brake related problems
1/2 year at Tein U.S.A. Inc. as Research and Development Assistant Engineer/Mechanic installing suspension kits on vehicles such as the Tein Toyota Yaris, Primedia Acura RSX-S, Falken Tires Lexus IS 250, Signal Auto's VW R32 and the list goes on and on...
1/2 year at International Auto as a Mechanic

now that you see where my experience comes from, here's a few things that I'd be able to offer you:

- brake bleeding
- brake hose replacement
- brake master cylinder & proportionate valve replacement
- brake disk, pad, & caliper replacement
- rear disk brake swap conversions
- strut/shock absorber replacement
- lowering & race springs installation
- complete coil-over installation
- Tein EDFC installation
- strut tower bars & sway bars installation
- upper & lower control arm replacement
- axle replacement
- basic tune-ups
- coolant system flush
- transmission services
...you get the idea...

if you can't reach me via HT, hit me up via aim at gL3NdiZzLe I'm located in Whittier, about 10 minutes east of the 605 and 5 freeways





Modified by incognito E46 at 8:36 PM 4/23/2008

 

bump for a fellow h-t member.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRkid1 &raquo;</TD></TR><TR><TD CLASS="quote">bump for a fellow h-t member.</TD></TR></TABLE>

thanks - just trying to survive as a broke college student thats all

 

with eibach comming up + more time at work = no time to work on your car, contact me

 

bump for guaranteed serviced

 

bump for you sir!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jtfc3s &raquo;</TD></TR><TR><TD CLASS="quote">bump for you sir!!</TD></TR></TABLE>

thank you, just trying to pay my bills like everyone else

 

 

interested in how much it'd cost to do a brake master cylinder replacement.

if you can PM me with how much you charge for something like that. thanks.

 

pm replied

 

how much for a h22 swap?

 

I got a Honda Insight that i want to put a GSR motor into. How much?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ==Catfish== &raquo;</TD></TR><TR><TD CLASS="quote">I got a Honda Insight that i want to put a GSR motor into. How much?

</TD></TR></TABLE>

1million dollars!!


bump for Gren...

 

i have another crx i need lotsa stuff done to it... lol HELP ME!!!!!

Bump for Glenny!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stripped Honda &raquo;</TD></TR><TR><TD CLASS="quote">how much for a h22 swap?
</TD></TR></TABLE>

not enough time and byond my level of expertise and comfort, dont pm me. contact em1 loi for further information

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ==Catfish== &raquo;</TD></TR><TR><TD CLASS="quote">I got a Honda Insight that i want to put a GSR motor into. How much?

</TD></TR></TABLE>

due to time and the amount of work needed to install an obd2 gsr in a insight, i have to turn down this offer of yours. refer to http://www.hondamarketplace.co...82705 and ask for a quote. tell him dizzle sent you

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bleakdragonmage &raquo;</TD></TR><TR><TD CLASS="quote">


1million dollars!!


bump for Gren... </TD></TR></TABLE>

if i had that much money, i'd buy a koenigsegg ccx with the optional rear wing. top gear tested, mother approved.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LALA &raquo;</TD></TR><TR><TD CLASS="quote">i have another crx i need lotsa stuff done to it... lol HELP ME!!!!!

Bump for Glenny!!! </TD></TR></TABLE>

call me or text me, you have my number mahal. i'll be at school practically the entire day so i wont be able to go on ht and check my pm's

 

for the lazy people

 

Modified by incognito E46 at 11:18 AM 2/5/2008

 

in order to get hold of me other then through ht., send me an instant message via aim. my sn is gl3ndizzle. i'll be in class practically the entire day/nite so if you do message me and i dont respond back immidately, give me a few minutes to do so.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by illmob &raquo;</TD></TR><TR><TD CLASS="quote"> for the lazy people </TD></TR></TABLE>

hahahah everyone lazy at some point, right now im too lazy to go to class but with 3 test that are today which are back-to-back-to-back, i cant afford to miss out on class

 

 

You should be a stripper. They make a **** load of money.

 

will you swap a K20 in my honda lawnmower?

 

Majorities of the pm's replied its kindda hard replying back to pm's via sk lx.

If you have a question reguarding performance suspension parts or brake setup's hit me up via aim.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stripped Honda &raquo;</TD></TR><TR><TD CLASS="quote">will you swap a K20 in my honda lawnmower?</TD></TR></TABLE>

You wanna hit v-tec while mowing the lawn? Damn I guess you inna rush to do yard work =P mircle grow + cow fertilizer (crap) + 2-3 weeks = healthy green lawn in time for spring... just call me dr. Green thumb