I was recently hit from the rear and the rear Bumper Beam Core Support is bented a little bit. I want to replace it but I dont see any screws fasten the beam in place. I doubt welding is needed to fasten beam in place?


Modified by hmtcrxsir at 11:48 PM 2/3/2008

 

Hope this helps.

 

thank you sir

 

Just curious where you got the picture for this post - I'm going to replace my bumpers on my 96 Civic EX and the picture looked useful.

Thx

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TDunlop &raquo;</TD></TR><TR><TD CLASS="quote">Just curious where you got the picture for this post - I'm going to replace my bumpers on my 96 Civic EX and the picture looked useful.

Thx</TD></TR></TABLE>
It's from the factory service manual.

Why are you replacing your bumpers?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hmtcrxsir &raquo;</TD></TR><TR><TD CLASS="quote">thank you ma'am</TD></TR></TABLE>

fixed

 

They're both busted - cracked, falling off - and I don't want pay the 1500 to get them replaced by Honda. Look at the bumper parts at auto warehouse, it looks like I could do it myself - bad idea?