FS: GSR swap with cams, new rota torques, assorted EK stuff
Thread Starter
Member
Joined: Nov 2001
Posts: 1,199
Likes: 0
From: portsmouth, va
FS: GSR swap with cams, new rota torques, assorted EK stuff. Portsmouth VA
everything is in Portsmouth, VA. It's gonna be pick up for the large items, the smaller stuff I will ship at buyers expense.
No trades, I'm out of hondas.
uh...really big pics. sorry
OBD II JDM B18C (GSR) swap
Still in car, hear it run before you buy it...
$3500 OBO
Skunk2 68mm throttle body
Skunk2 Pro Series intake manifold
RC310 injectors
Skunk2 Titanium Retainers and tuner series dual valve springs
Skunk2 Stage2 cams
H22 (prelude) lost motion assemblies
Skunk2 Cam gears
Password JDM "Whale *****" carbon fiber intake
Rage header
CTR N1 crank pulley.
Prothane Upper, and Energy suspension lower engine mount inserts.
ACT stage 2 clutch, and 8.8lb steel flywheel.
Walbro 255lph fuel pump
Chipped P28, Tuned by Grey at Millenium.
193/128 corrected.
about 8K miles since the head package was installed.
More info on the tune here:
http://www.vadriven.com/forums/showthread.php?t=168487
more pics here:
http://blog.myspace.com/index.cfm?fu...ndID=181701853
.
Brand spanking new rota torques with falken azenis RT-615s.
$750 OBO
literally never made it on the car, never touched the ground, 2 are still in the box that machiii shipped them in. with lugs, centers and hub rings
JDM ITR Recaros
sold
USDM ITR Rear seats:
$200 OBO
flawless.
EM Racing quick release C-pillar bar:
sold
Personal Neo Grinta, black preforated leather w/ red stitching and NRG quick release
$225 OBO
Spot at 8:00 position on wheel is a piece of pine needle that snuck into my pic. wheel has no damage at all.
Darkstar traction bar:
$150 firm
built by jimfab. ONLY fits EK's with 2 piece lower control arms, so no SIs or EXes.
Magnaflow 2.5inch High-flow car with 2.5 inch donut flange and 3 bolt flange:
$150 firm
SI cluster
$200
I also have most of a complete civic. most body panels are gone, and door panels are gone, but I have the rest of the interior, auto to manual parts, ect. hit me up.
Modified by tecnic1 at 11:21 PM 2/3/2008
Modified by tecnic1 at 11:34 AM 2/6/2008
No trades, I'm out of hondas.
uh...really big pics. sorry
OBD II JDM B18C (GSR) swap
Still in car, hear it run before you buy it...
$3500 OBO
Skunk2 68mm throttle body
Skunk2 Pro Series intake manifold
RC310 injectors
Skunk2 Titanium Retainers and tuner series dual valve springs
Skunk2 Stage2 cams
H22 (prelude) lost motion assemblies
Skunk2 Cam gears
Password JDM "Whale *****" carbon fiber intake
Rage header
CTR N1 crank pulley.
Prothane Upper, and Energy suspension lower engine mount inserts.
ACT stage 2 clutch, and 8.8lb steel flywheel.
Walbro 255lph fuel pump
Chipped P28, Tuned by Grey at Millenium.
193/128 corrected.
about 8K miles since the head package was installed.
More info on the tune here:
http://www.vadriven.com/forums/showthread.php?t=168487
more pics here:
http://blog.myspace.com/index.cfm?fu...ndID=181701853
.Brand spanking new rota torques with falken azenis RT-615s.
$750 OBO
literally never made it on the car, never touched the ground, 2 are still in the box that machiii shipped them in. with lugs, centers and hub rings
JDM ITR Recaros
sold
USDM ITR Rear seats:
$200 OBO
flawless.
EM Racing quick release C-pillar bar:
sold
Personal Neo Grinta, black preforated leather w/ red stitching and NRG quick release
$225 OBO
Spot at 8:00 position on wheel is a piece of pine needle that snuck into my pic. wheel has no damage at all.
Darkstar traction bar:
$150 firm
built by jimfab. ONLY fits EK's with 2 piece lower control arms, so no SIs or EXes.
Magnaflow 2.5inch High-flow car with 2.5 inch donut flange and 3 bolt flange:
$150 firm
SI cluster
$200
I also have most of a complete civic. most body panels are gone, and door panels are gone, but I have the rest of the interior, auto to manual parts, ect. hit me up.
Modified by tecnic1 at 11:21 PM 2/3/2008
Modified by tecnic1 at 11:34 AM 2/6/2008
Junior Member
Joined: Nov 2006
Posts: 49
Likes: 0
From: Woodbridge, va, usa
Re: FS: GSR swap with cams, new rota torques, assorted EK stuff. Portsmouth VA (tecnic1)
I am interested in the rear seats, rear upper tie bar and traction bars. call me at 703 717 1764 or email me at david.dadvar@gmail.com. I don't always get on here so those are the best way to get a hold of me. thanks
sorry for your loss bro 
Thread
Thread Starter
Forum
Replies
Last Post
