ive been running the 59300 cam now for about 3 years on my boosted sohc and ive been wondering about this akmee cam. i look at the specs and its comparable to a crower stage 3 cam, my question is should i change up and run that type r cam? i have done a lot of searching here and on google and there isnt much info on the cam. 59300 is a good all motor cam that works well on boost but im wondering if the akmee cam will also be good on boost. any input is greatly appreciated.

thanks

 

any opinions are welcome.

 

i guess no one has heard of or ran an akmee cam huh??

 

what did you decide to do?

 

i ended up pulling out the 59300, running the stock z6 for now until i can decided what im gonna do. might put in a 59500 if anything

 

Check out the bisimoto 1.2 turbo cam Looking at results and info posted on this and his site it seems to make ALOT more power than others. Im looking into geting one myself for my build.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poundedhatchcrap &raquo;</TD></TR><TR><TD CLASS="quote">Check out the bisimoto 1.2 turbo cam Looking at results and info posted on this and his site it seems to make ALOT more power than others. Im looking into geting one myself for my build.</TD></TR></TABLE>


Where are these results exactly? I mean, aside from his website which is obviously biased. I haven't seen anything on h-t.

 

Why would his site be biased? Well heres the thread just gotta know what your looking for. https://honda-tech.com/zerothread/2217467

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poundedhatchcrap &raquo;</TD></TR><TR><TD CLASS="quote">Why would his site be biased? </TD></TR></TABLE>


Yeah, why would a vendor be biased towards his own product

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Well heres the thread just gotta know what your looking for. https://honda-tech.com/zerothread/2217467</TD></TR></TABLE>


Oh, you mean the thread I already posted in? The thread where I already implied that people like you are foolish and easily manipulated?

Yeah, that's what I thought. Your post was complete bullshit.

 

your still not banned ? wtf ?? lol

 

^^ Yeah, heaven forbid I stray from the masses and think with my own brain. Definitely grounds for banishment.

 

So if your thinking with your own brain and stray from the masses then why would you make a post asking a question? I was only attempting to help you out based on the info that was given. You on the otther hand want to have attitude. Like I said Im only tryin to help so please chill bro. Hope your build comes out good. Anyway to the original poster I hope that post helped YOU out sorry for the from the other guy.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by poundedhatchcrap &raquo;</TD></TR><TR><TD CLASS="quote">So if your thinking with your own brain and stray from the masses then why would you make a post asking a question? </TD></TR></TABLE>

That was simply to verify that you're an idiot; I didn't want to do a preemptive flame in case you actually had something useful to contribute.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">I was only attempting to help you out based on the info that was given</TD></TR></TABLE>


Throwing out an opinion that is based on pure nothingness is not helpful. In fact, it's the opposite of helpful. It's what destroys the credibility of this forum.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote"> You on the otther hand want to have attitude.</TD></TR></TABLE>

No, I want to find pure, unbiased testing of the Bisi cam, so that I may decide for myself whether or not to use his product. As far as I can tell, there is no info posted on this forum concerning his cam or how well it performs against the competition.