(( Project SOHC Drag )) Build thread
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
(( Project SOHC Drag EH Hatch)) Build thread
Started this build beginning of summer 2007... Things are starting to move so I thought I would start our thread. Its me and my cousin B18vtec's drag car. We will keep things updating as we go! 
The start:
Shell bought from user Joe "V8Killer" "CUin9sec" not a favored user! haha but the deal we got we couldnt resist!
NASTY NASTY NASTY, look at that sweet hole over on the left tower!!
Cleaned the stickers/gunk off the doors.
Sanded and Waxed the hood to try and get the faded parts off. Looks better but still a little hazy.
Starting to clean the inside, pulled the rear side panels out.
Bare z6 block
Donor block; for just extra parts
Dual stage boost controller
Modified by dustinz_em1 at 8:47 PM 1/22/2008
Modified by dustinz_em1 at 2:53 PM 4/3/2008
The start:
Shell bought from user Joe "V8Killer" "CUin9sec" not a favored user! haha but the deal we got we couldnt resist!
NASTY NASTY NASTY, look at that sweet hole over on the left tower!!
Cleaned the stickers/gunk off the doors.
Sanded and Waxed the hood to try and get the faded parts off. Looks better but still a little hazy.
Starting to clean the inside, pulled the rear side panels out.
Bare z6 block
Donor block; for just extra parts
Dual stage boost controller
Modified by dustinz_em1 at 8:47 PM 1/22/2008
Modified by dustinz_em1 at 2:53 PM 4/3/2008
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag )) Build thread (dustinz_em1)
The tear-down = parts to the new block!!
more parts:
Chipped P06
IC piping
BOV - SOLD the BOV now not using this cheapy haha
fabbed this up outta an old CF hood...
just a pic
more parts:
Chipped P06
IC piping
BOV - SOLD the BOV now not using this cheapy haha
fabbed this up outta an old CF hood...
just a pic
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag )) Build thread (dustinz_em1)
part #9200 = hopefully no problems
Got rid of the nasty 17s that came on it.
Scat Rods
Ended up going with this Block Y8 due to it having a matching Girdle... Other one wasnt for sure cuz the kid was a little shady lol. and already notched. just looks a little nasty
New corners and hood pins
Got rid of the nasty 17s that came on it.
Scat Rods
Ended up going with this Block Y8 due to it having a matching Girdle... Other one wasnt for sure cuz the kid was a little shady lol. and already notched. just looks a little nasty
New corners and hood pins
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag )) Build thread
Cage kit from S&W..........
Add some freshness to the bay! and do a minor shave. just get rid of some extra holes. sorry phone pix
b18vtec welding up some holes
Add some freshness to the bay! and do a minor shave. just get rid of some extra holes. sorry phone pix
b18vtec welding up some holes
Trending Topics
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag )) Build thread (dustinz_em1)
More is on the way!!
Also got the blue dash out, getting ready for a fresh coat of SEM Landau Black. as well as the rear panels
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag Hatch)) Build thread (dustinz_em1)
Roll cage painted black, and the interior got a fresh white paint job. The dull nasty looking parts will be covered by carpet/panels
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (( Project SOHC Drag Hatch)) Build thread (dustinz_em1)
Dash black, wheel on
Primed and foiled ready for paint.....
Paint layed. So fresh. Thanks to .EJ8
Panels all done w/ SEM Landau Black paint
Primed and foiled ready for paint.....
Paint layed. So fresh. Thanks to .EJ8
Panels all done w/ SEM Landau Black paint
from me
Honda-Tech Member
Joined: Nov 2004
Posts: 565
Likes: 0
From: LS T in, CT, USA
Re: (2fastGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2fastGSR »</TD></TR><TR><TD CLASS="quote">nice build.
Props for getting the car back the way it should be first instead of just throwing it all together</TD></TR></TABLE>
Thats why i enjoy watching builds like this one..
Doing it right the first time!!!
Props for getting the car back the way it should be first instead of just throwing it all together
</TD></TR></TABLE>Thats why i enjoy watching builds like this one..
Doing it right the first time!!!
Junior Member
Joined: Dec 2005
Posts: 620
Likes: 0
From: tHe 208
Re: (d16z6Tcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d16z6Tcrx »</TD></TR><TR><TD CLASS="quote">nice build! im in the same state with mine.
where did you get the paint for the panels and dash? a link would be nice.</TD></TR></TABLE>
Part #: SEM15013, Landau black.. google it..
where did you get the paint for the panels and dash? a link would be nice.</TD></TR></TABLE>
Part #: SEM15013, Landau black.. google it..
Thread Starter
Junior Member
Joined: Jan 2006
Posts: 412
Likes: 0
From: 2C, id, usa
Re: (.EJ8)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .EJ8 »</TD></TR><TR><TD CLASS="quote">
Part #: SEM15013, Landau black.. google it.. </TD></TR></TABLE>
But to answer b18vtec got it when doing it but i think it was at like autozone or checkers or something just local in twin falls, ID
**** comes out straight OEM looking, look it up here on HT, there are quite a few peeps who have used it for their builds.
were you located?
Part #: SEM15013, Landau black.. google it..
</TD></TR></TABLE>But to answer b18vtec got it when doing it but i think it was at like autozone or checkers or something just local in twin falls, ID
**** comes out straight OEM looking, look it up here on HT, there are quite a few peeps who have used it for their builds.
were you located?