--:{Gil's Huge Sell-Out Sale!}:-- Lot's of good stuff for everyone and their Mama!
Engine has about 25k total miles on it. Only ran synthetic oil, changed every 2k miles or less.
Engine specs:
- '01 JDM ITR stock short block
- '01 ITR head with Portflow competition head-work (full race port, full radius valve job, fully polished combustion chambers, head milled .010)
- Buddy Club 2-piece head gasket
- ARP head studs
- Buddy Club Valve Springs and retainers
- Buddy Club Flat-faced valves
- Skunk2 Pro2 cams and adjustable gears
- New AEBS Intake Manifold
- New Power Industries 70mm throttle body
- magnetic drain plugs
- CTR N1 Crank Pulley
- New 370cc RC injectors
- AEM High-flow fuel rail
- Adjustable fuel pressure regulator
- New Greddy Hi-strength timing belt
- NGK Spark Plug wires
- New NGK Iridium Spark Plugs
- Custom ITR Valve cover w/ cut side
The last time we dyno'd the motor it made 227whp and 144ft/lbs of torque with Buddy Club Spec IV cams and maxed out injectors. Since then I have purchased new Skunk Pro Series 2 cams and 370cc injectors. The motor shoudl easily put down between 235-240 whp with the new components.
<FONT SIZE="2">Asking $2900 picked-up for the complete long block as pictured
</FONT>
Some pics of the goods





Old Dyno Sheet


Shipping available on everything. Paypal gladly accepted
FS:
Genuine Integra Type R OEM distributer. Complete with Cap. Off of my '01 with only 8,500 miles. Great for a back up.. asking $150 firm
Complete mint conditon OEM Axles off my '01 ITR with 8500 miles. Great conditon with no visible wear at all. No clicking what so ever. $150 for the set
I have another set of OEM GSR axles with 40k. Good condition. $100 for the set.
Used Fluidyne Radiator for DC2. Good Condition with no leaks. Comes with FAL Slim Fan
$200 firm

Used authentic DC2-R Shift linkage w/ ES Bushing Kit. Out of my 2001 USDM ITR
$140


Slightly used Hasport Mounts for B-Series in DC/EG Chassis vehicles. No major wear or damage since I only used them for 3k miles. I'll wipe them out before I ship/you pick them up
$300 firm

'05 RSX Type-S floormats. Barely used and in mint condition.
$100 obo

FS: Virgin K20a RSX Type-S "PRB" ECU. Came out of a '05 with low miles. The ECU has never been modified and works perfectly. Perfect for Hondata (no need to modify your existing ECU and ruin the OEM immobilizer)
Asking $200 shipped obo

FS: ITR transmission stiffener modified personally by John at Hytech to clear Hytech headers. It can also be used on other custom header such as DTR, SMSP, AN-R, etc. which interfere with the oem ITR stiffener.
$75 shipped

also For sale
Complete "20" used set of Spoon Sports aluminum lug nuts anodized red. Typical wear and tear scratches from being installed and re-installed a handfull of times. Retail price is like $150.
asking $75 shipped


Modified by GUILOTINE at 8:27 PM 1/24/2008
Engine specs:
- '01 JDM ITR stock short block
- '01 ITR head with Portflow competition head-work (full race port, full radius valve job, fully polished combustion chambers, head milled .010)
- Buddy Club 2-piece head gasket
- ARP head studs
- Buddy Club Valve Springs and retainers
- Buddy Club Flat-faced valves
- Skunk2 Pro2 cams and adjustable gears
- New AEBS Intake Manifold
- New Power Industries 70mm throttle body
- magnetic drain plugs
- CTR N1 Crank Pulley
- New 370cc RC injectors
- AEM High-flow fuel rail
- Adjustable fuel pressure regulator
- New Greddy Hi-strength timing belt
- NGK Spark Plug wires
- New NGK Iridium Spark Plugs
- Custom ITR Valve cover w/ cut side
The last time we dyno'd the motor it made 227whp and 144ft/lbs of torque with Buddy Club Spec IV cams and maxed out injectors. Since then I have purchased new Skunk Pro Series 2 cams and 370cc injectors. The motor shoudl easily put down between 235-240 whp with the new components.
<FONT SIZE="2">Asking $2900 picked-up for the complete long block as pictured
</FONT>Some pics of the goods
Old Dyno Sheet


Shipping available on everything. Paypal gladly accepted
FS:
Genuine Integra Type R OEM distributer. Complete with Cap. Off of my '01 with only 8,500 miles. Great for a back up.. asking $150 firm
Complete mint conditon OEM Axles off my '01 ITR with 8500 miles. Great conditon with no visible wear at all. No clicking what so ever. $150 for the set
I have another set of OEM GSR axles with 40k. Good condition. $100 for the set.
Used Fluidyne Radiator for DC2. Good Condition with no leaks. Comes with FAL Slim Fan
$200 firm
Used authentic DC2-R Shift linkage w/ ES Bushing Kit. Out of my 2001 USDM ITR
$140
Slightly used Hasport Mounts for B-Series in DC/EG Chassis vehicles. No major wear or damage since I only used them for 3k miles. I'll wipe them out before I ship/you pick them up
$300 firm
'05 RSX Type-S floormats. Barely used and in mint condition.
$100 obo
FS: Virgin K20a RSX Type-S "PRB" ECU. Came out of a '05 with low miles. The ECU has never been modified and works perfectly. Perfect for Hondata (no need to modify your existing ECU and ruin the OEM immobilizer)
Asking $200 shipped obo
FS: ITR transmission stiffener modified personally by John at Hytech to clear Hytech headers. It can also be used on other custom header such as DTR, SMSP, AN-R, etc. which interfere with the oem ITR stiffener.
$75 shipped
also For sale
Complete "20" used set of Spoon Sports aluminum lug nuts anodized red. Typical wear and tear scratches from being installed and re-installed a handfull of times. Retail price is like $150.
asking $75 shipped

Modified by GUILOTINE at 8:27 PM 1/24/2008
_____________________________$$$____$$____________ _____$$$__________ _$$$$$$$$$$$$$___$$__________$$$__$$$$____________ ___$$$$$$$$_______ $$$$$$$$$$$$$$$_$$$$________$$$$__$$$$___________$ $$_$$$$$$$$$$_____ $$_$$$____$$$$$_$$$$________$$$$__$$$$__________$$ $$__$$$$$$$$$$____ __$$$$_____$$$$_$$$$_______$$$$___$$$$_________$$$ $$__$$$$_$$$$$$___ _$$$$$___$$$$$__$$$$_______$$$$___$$$$$______$$$$$ $$__$$$$___$$$$$__ _$$$$__$$$$$____$$$$_______$$$$__$$$$$$_____$$$$$$ $___$$$$____$$$$__ _$$$$$$$$$______$$$$______$$$$___$$$$$$$__$$$$$$$$ $___$$$_____$$$$__ $$$$$$$_________$$$$______$$$$___$$$$$$$$$$$$__$$$ ___$$$$_____$$$$__ $$$$$$$_________$$$$_____$$$$____$$$_$$$$$$$___$$$ ___$$$$____$$$$___ $$$$$$$$$$$_____$$$$_____$$$$____$$$___$$$____$$$$ ___$$$___$$$$$$___ _$$$_$$$$$$$$___$$$$____$$$$$____$$$__________$$$_ ___$$$$$$$$$$_____ _$$$_____$$$$$___$$$$__$$$$$$____$$$__________$$$_ __$$$$$$$_________ _$$$____$$$$$$___$$$$$$$$$$$____$$$$__________$$$_ __$$$$_____________ _$$$$$$$$$$$$$____$$$$$$_$$$$___$$$__________$$$__ __$$$_____________ $$$$$$$$$$$________$$$___$$$$___$$$__________$$___ _$$$____________ $$$$$$$___________________________________________ _$$$____________
_$$______________________Vincentek9_______________ __$$$_____________
origonally made by vixionxboy
_$$______________________Vincentek9_______________ __$$$_____________
origonally made by vixionxboy
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">thanks guys for the kind words. Hopefully everything sells fast</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">thanks guys for the kind words. Hopefully everything sells fast</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">thanks guys for the kind words. Hopefully everything sells fast</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">thanks guys for the kind words. Hopefully everything sells fast</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">Gil must have something else up his sleeve.
</TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ »</TD></TR><TR><TD CLASS="quote">Gil must have something else up his sleeve.
</TD></TR></TABLE>
blown ZC, because as Gilbert would say
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Onepoint6i »</TD></TR><TR><TD CLASS="quote"> El ZC es mejor!</TD></TR></TABLE>
</TD></TR></TABLE>blown ZC, because as Gilbert would say
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Onepoint6i »</TD></TR><TR><TD CLASS="quote"> El ZC es mejor!</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">Interior trim and rear seats sold!</TD></TR></TABLE>
now get that engine sold!
now get that engine sold!



