FS: JDM GSR OBD1 full swap w/lsd
I have a JDM B18C1 GSR full swap purchased from hmotors. OBD1 94-97. It is currently installed in my EG chassis car and runs phenominally. It has factory LSD transmission. I have put about 10k on it. It comes with everything you need to swap it. Comes with:
- Motor
- Hydraulic LSD Tranny
- ECU (Chipped P28 by Phearable.net)
- New Axles with Half Shaft
- Shift Linkage
- Stock Motor Mounts
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Ram intake that converts to cold air w/K&N filter
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- NGK 8mm plug wires
- OEM Type R oil cap
- Engine Harness
- Comes With All Sensors Needed
Sells on Hmotors for 2999.99 + 350 for the LSD + shipping.
Here is the link from their site:
http://www.hmotorsonline.com/s...30009
I added the chipped P28 ECU, NGK plug wires, typeR oil cap, new axles, and CAI.
I am looking for $3000 FIRM picked up.
-Shipping extra
I can also perform the swap on your car for $500 extra
You can come look at it and if you like it I can take it out of the car in about 3 hours. The engine pulls real good and I average about 31mpg on it. This engine has not yet seen an exhuast or an other mods. Just the intake. I have it in my daily driver it has not gotten any abuse. I am planning on parting the car out if the swap sells. I am not willing to seperate and I am only interested in cash, no trades.
please either email me or reply to this thread, because the PM system does not work very well on here for me. bigboostin @ gmail.com

Modified by H22AEG2 at 10:41 PM 1/15/2008
- Motor
- Hydraulic LSD Tranny
- ECU (Chipped P28 by Phearable.net)
- New Axles with Half Shaft
- Shift Linkage
- Stock Motor Mounts
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Ram intake that converts to cold air w/K&N filter
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- NGK 8mm plug wires
- OEM Type R oil cap
- Engine Harness
- Comes With All Sensors Needed
Sells on Hmotors for 2999.99 + 350 for the LSD + shipping.
Here is the link from their site:
http://www.hmotorsonline.com/s...30009
I added the chipped P28 ECU, NGK plug wires, typeR oil cap, new axles, and CAI.
I am looking for $3000 FIRM picked up.
-Shipping extra
I can also perform the swap on your car for $500 extra
You can come look at it and if you like it I can take it out of the car in about 3 hours. The engine pulls real good and I average about 31mpg on it. This engine has not yet seen an exhuast or an other mods. Just the intake. I have it in my daily driver it has not gotten any abuse. I am planning on parting the car out if the swap sells. I am not willing to seperate and I am only interested in cash, no trades.
please either email me or reply to this thread, because the PM system does not work very well on here for me. bigboostin @ gmail.com
Modified by H22AEG2 at 10:41 PM 1/15/2008
Thread
Thread Starter
Forum
Replies
Last Post
importboi22
For Sale
6
Apr 25, 2005 05:39 PM




