96 EK/SIR Front/OEM/Aftermarket Options
$2950 OBO
1996 Manual CX
267xxx Kms on the car
Exterior
The car has been repainted a Mazda rx8 velocity red metallic
2000 Sir front end
SIR front lip
CTR rear lip
99-00 taillights
Foglights
HID's (prolumen)
blacked out OEM headlights
Magnaflow super turbo muffler
The exterior has a few spots but overall is in good shape. There is roughly a 3inch dent on the front bumper from being backed into, merely cosmetic. The rear quarters have pretty minor bubbling starting on both sides.
Pictures included below.
Brakes\Suspension
Integra front and rear brakes
Rear hawk pads
New Energy Suspension poly trailing arm bushings
ITR front sway bar
OEM Sir front and rear lower control arms, sway bar ready
H&R race springs/stock shocks
Steelies( tires will need replacing to cert)
Interior
Mostly stock
Integra driver seat(if not replaced with stock)
Possibly a momo champion steering wheel and hub(if not repalced with stock)
Needs a driverside manual window handle
Engine
D15
289xxx KM'S
Short ram intake
converted to OBD1
OBD2 to OBD1 Conversion harness
OBD1 ECU
Motor is very reliable
The wheels pictured are not included. To my knowledge the car will not need much to certify other then the mentioned tires.
Check out thread linked below if you want to include anything else I have left..
http://teknotik.com/jdmrides/f...=4862
Please email me at tyler_gunnis@hotmail.com for a quick reply. Pm would be the second best way to contact me.
Pictures...keep in mind these shots were taken without a motor and the reason why the height on the front seems odd.



Modified by gunnis at 6:04 PM 1/27/2008
Modified by gunnis at 11:14 PM 1/31/2008
Modified by gunnis at 10:27 AM 2/5/2008
1996 Manual CX
267xxx Kms on the car
Exterior
The car has been repainted a Mazda rx8 velocity red metallic
2000 Sir front end
SIR front lip
CTR rear lip
99-00 taillights
Foglights
HID's (prolumen)
blacked out OEM headlights
Magnaflow super turbo muffler
The exterior has a few spots but overall is in good shape. There is roughly a 3inch dent on the front bumper from being backed into, merely cosmetic. The rear quarters have pretty minor bubbling starting on both sides.
Pictures included below.
Brakes\Suspension
Integra front and rear brakes
Rear hawk pads
New Energy Suspension poly trailing arm bushings
ITR front sway bar
OEM Sir front and rear lower control arms, sway bar ready
H&R race springs/stock shocks
Steelies( tires will need replacing to cert)
Interior
Mostly stock
Integra driver seat(if not replaced with stock)
Possibly a momo champion steering wheel and hub(if not repalced with stock)
Needs a driverside manual window handle
Engine
D15
289xxx KM'S
Short ram intake
converted to OBD1
OBD2 to OBD1 Conversion harness
OBD1 ECU
Motor is very reliable
The wheels pictured are not included. To my knowledge the car will not need much to certify other then the mentioned tires.
Check out thread linked below if you want to include anything else I have left..
http://teknotik.com/jdmrides/f...=4862
Please email me at tyler_gunnis@hotmail.com for a quick reply. Pm would be the second best way to contact me.
Pictures...keep in mind these shots were taken without a motor and the reason why the height on the front seems odd.



Modified by gunnis at 6:04 PM 1/27/2008
Modified by gunnis at 11:14 PM 1/31/2008
Modified by gunnis at 10:27 AM 2/5/2008
Thread
Thread Starter
Forum
Replies
Last Post
OEM 99-00 HOOD BRA + NOSE MASK COMBO, OEM SIR LCAS , OEM SIR FRONT AND REAR SWAY BARS, OEM CAMBER KI
ek_student
For Sale
2
Jan 4, 2009 12:08 AM





