Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for Race Car parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. NO useless OEM parts!

2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and I will delete it.

3) you are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, all your posts in the FS sticky will be deleted

4) NO WTB ADS!

5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE

I will delete any BS I feel does not belong in here.

Clayton

 

<FONT SIZE="4"><U>Bogart Slicks/Skinnies</U></FONT>
Im selling my set of Bogart Fly Stars. they are 5x114.3
-15"x8" Front rims with spacers (removable)
-Tires are M&H 23x8.5x15 with more than 1/2 meat left. they are awesome and hook great
-15"x4" rear skinnies. They are in great shape too.

Only reason I am selling is because I am moving into a 13" setup for this year.

I want $1000 for the whole set of $500 and $500


<FONT SIZE="4"><U>Kens Kustom Chassis Roll Cage</U></FONT>
I'm selling my roll cage as the rules no longer require me to have it. i never got to installing it so its brand new. Just been sitting.

As per ken, it fits all 92-01 Hondas/Acuras. This is cromoly so its lighter than the other ones. Its only 5 pts but can get the other single point for like $50 shipped. Also, can upgrade to 10pt for another $300

I paid $430 new. I want $350 for it. and for those who know the Kens stiuff, you know this is a steal

<FONT SIZE="4"><U>DTR Header</U></FONT>
I'm selling an extra header. Its for a B-Series. It is the full stainless version.4-2-1 long tube.

I want $700 shipped.


Francisco
757-575-2416


Modified by RPRacing at 2:59 PM 1/19/2008

 

52mm TMW ITB's for GSR head. Used under 1000 miles. Comes with everything you would get with a new set. This includes throttle linkage, fuel rail, pressure regulator.

$1000

For an additional $200, will throw in a set of RC440's








Modified by 2 0 3 at 11:51 PM 1/10/2008

 

BNIB CP 81.5mm 12 to 1 pistons with rings..$400

NOS single fogger wet kit..complete.. comes with whatever jets you want...anywhere from 50hp-200hp...$350 obo

4" stainless downpipe for full-race style ram horn...$150

4-1 b-series header ss. made 200hp on my oem built gsr motor...$150

Precision 750 intercooler in great shape..$250 SOLD

Precision 1000cc injectors...10 passes on them..$200 SOLD

AEM 5.2 bar map sensor with pigtail...$75 SOLD

Crower B16 rods...$200

Type r valve cover in great shape...$100

B16 block.. Darton drop in sleeves..81.5mm..bare block with main caps...$250 SOLD

H-series turbo kit.. garrett .60 trim t3/t4, greddy type r bov, hks 40mm wastegate, tubular manifold, complete piping and intercooler...$1200 obo

haltec e6-s8 with honda harness and msd dis2 ignition...$500


Modified by .CUBISH. at 9:51 AM 1/30/2008


Modified by .CUBISH. at 9:57 AM 1/30/2008

 

ok guys i have some parts i need to get rid of,so i can do two
things pay some people i owe and finish my 2 stg. direct port set up.

next is a 1 piece mb fiber glass front end...but i am going to post it and if it sells then i will take it down.



IF YOU ARE SERIOUS ABOUT BUYING PLEASE PM ME A # WHERE YOU CAN BE REACHED IF NOT I WILL NOT RESPOND.

harv


Modified by nitrousballa at 6:41 PM 1/22/2008


Modified by nitrousballa at 6:43 PM 1/22/2008

 

- Further questions can be sent via email to EggumRacing@yahoo.com.
- For shipping quotes please send shipping address, request either: UPS ground, 2nd Day or Red Label, parts requested.
- Local pickup from Elgin, IL also ok.
- More pictures can be emailed if necessary.
- PayPal (3% fee) or certified check accepted.

Race car is for sale here:
http://www.racingjunk.com/post....html

Huge list of Brand New OEM Honda / Acura parts here:
http://blog.myspace.com/index....79076

Honda Generators, Power Washer, Air Compressor and Water Pump
Two brand new PowR-Quip Industrial Generators, Part # PQ-6000H, Honda motors, Retails $3,000 each, Selling $2,500 each
View Here: http://www.powr-quip.com/1choicegenerator.html

PowR-Quip PQ2600R Power Washer, $1,000
View Here: http://www.powr-quip.com/pressurewasherimage.html

PQ5508 Honda Powered Air Compressor, $850
View Here: http://www.powr-quip.com/aircompressors.html

PQ3H Honda Powered 3" De-watering Pump, $500
View Here: http://www.powr-quip.com/pump-3.html



New HP Verve Special Edition laptop package w/ Oakley Computer bag, Philip's Headphones & $25 Best Buy Music gift card.
View Here:
http://blog.myspace.com/index....02713



BDL Fuel Rail, New, bronze, $125 View: http://www.bdlsales.com/produc...t=155

Blaupunkt
10” Monitor, new in box, P# IVMR-1042, $325
View Details: http://www.bluespot.co.uk/stock/screen_1.asp
12” Sub, new in box, P# Vw1200, $100
View Details: http://www.sonicelectronix.com....html



Ferrea Honda Seat Locator, New, Two sets available, P# SL1000, $75 per set



Ferrea Used Valvetrain, all parts for Four complete sets, Stock GSR size Valves. Valves and valve springs are currently getting checked out by Ferrea to make sure all are in good condition. Once parts are back, I'll be selling each set individually, pricing available shortly. IM if interested in a set to be added to the call back list once parts are back.



Golden Eagle B-series Adjustable Cam Gears, Brand New, P#GDC200, two sets available, $180 set

Golden Eagle GSR Head Studs, one set, used, $50 SALE PENDING

Golden Eagle Water Pump eliminator, New, $100


Golden Eagle 84mm Head Gasket, New, $95



Hans Model 10 device, Size Medium, standard tether, SFI 38.1, Stamped April ‘05, legal until April ‘10, with cover, $600 Sale Pending
View: http://hansdevice.com/s.nl/it....ory=2


Honda B-Series valve cover, one with -12 bung welded on to front, $75

GSR oil pumps, four available, used, $50 each

HyperCoil 2 ½” 175lb springs, used, $75


Mickey Thompson
28 x 10.5 x 15 tire set, 12 passes, great condition, $125

28 x 10.5 x 15 used matching sets of tires, $50 - $100 per set depending on condition, 5 sets available


NGK Spark Plugs, Part # R7433-10 Stock # 4891, Three boxes available, $25 each
NGK Spark Plugs, Part # PBKR9EIX Stock # 2669, 8 boxes available, $25 each


Nitrous Express Digiset, new in box, P# 15964, $100
View Details: http://store.summitracing.com/...15964

Nitrous Express TPS Switch, new in box, P# 15961, $80

Nitrous Express Used white 10lb bottle, $150



Nitrous Express Bottle heater, new without box, element only, $85
Nitrous Express Gen-X2 accessory kit, Brand New, $375
NOS 10lb polished bottle, brand new, $200



Oakley
Driving Boots, Men’s Size 7, SFI 3.3/5, Black, Stamped June ‘04, comes with box. $95.
View: http://oakley.com/pd/4774



OmniPower
One set of Adjustable Front Drag suspension, New, P#DRAGCOw12KFRT, $700
View here: http://www.omnipowerusa.com/product.asp?P_ID=122

OmniPower Brand new lower control arms, ‘96 - ‘00 Civic, $375

OmniPower Front Camber kit, slightly used for mock up only, new bolts & ball joints, $150



P.I.T. Header, new, b-series single cam, stainless, $200

Sparco Grey Rev seat cushion pads, brand new in bags, set of two, $75 View details:
http://www.spectorracing.com/c...&js=n


Vibrant
New in box 3" stainless U-J mandrel bent tubing P# 2611, $80
New in box 3" stainless straight tubing, 5" length P# 2642, $75
4" stainless U-J mandrel bent tubing P# 2613, end cut off, $105
New in box 3" x 4" stainless offset (eccentric) reducer P# 2633, two available, $60 each
New in box P# 2891, 3 ½” 90’ bends polished aluminum, three available, $22 each
New 3" aluminum tubing 18" long straight pipe polished, P# 2173, $18

** All pics of Vibrant products can be seen here:
http://viewmorepics.myspace.co...68505

Vibrant
Aluminum Cam Gear Caps, P#12650, New, Three available, $25 each



T-Shirts
Eggum Racing Girl’s t-shirts, Size Small & Medium, $15


GSR head - M2 port job, set up for ½” head studs, unassembled, just add valve train, $1800 obo




Short block - GRP aluminum rods, New CP pistons, rings & wristpins, Honed, Golden Eagle sleeved, O ringed block, Micro polished & balanced crank, Block clearanced for rods, 84mm, $4000

Here's the list of Wrench Worx stuff we've got, as stated it's all brand new in shipping boxes from Wrench Worx. All of these are just like Pit Pal products. View pics here: http://www.wrenchworx.com/

Quantity / Description / Part #
2 3 tier gallon 60002B $122 each
1 Small Flip Down 60003B $70
2 Cable Tie Holder 60008B $35
1 Double Helmet Holder 60010B $90
2 Paper towel dispenser 60020B $35 each
2 2 Can Cup Holder 60021B $32 each
2 6 Grease tube shelf 60023B $32 each
2 6 Gear lube shelf 60025B $31 each
1 3 Bottle Nitrous Holder 60028B $85
1 4 Bay CO2 Bottle Holder 60033B $70
2 Spare tire holder 60044B $85 each
5 Double tape bracket 60050B $37 each

All pricing is 15% off online store pricing, view here:
http://www.modernparts.com/asp...&c=16


Modified by Eggum Racing at 10:57 PM 1/31/2008

 

1992 Civic CX shell
custom mix candy red metallic paint inside and out
shaved side moldings
custom lightweight 1 piece front end (discontinued and near impossible to find)
"Safety 21" 6 point rollcage with added harness bar (same guys who make Cusco cages i believe, imported from Japan)
DC Integra suspension/brakes on all 4 corners
ARP extended wheel studs
DC2 GSR dash with custom fit door panels
DC2 GSR gauge cluster
Billet battery box located behind passenger seat
projector headlights
clear corner lights
clear/red tailights

Problem areas...cracked windshield, a couple chips/scratches in the paint.

Car was street driven and is currently titled, insured. I'd love to keep it but the one piece front end isn't legal in the classes i want to race in.








It is located in Ft Lauderdale Florida.

PM ME FOR ANY DETAILS!

EMAIL: INFO@LEGACYTUNING.COM

 

hasport hydro to cable conversion kit. allows usage of cable trannies in 92-95 civics and 94-01 integras. $150

rpm services 76mm t/b. $200

str 68mm t/b. $200

obd1 gsr distributor. $150

arp headstuds. $80

delsol ebrake cables for rear disc. $80










Modified by building boost at 1:33 AM 1/31/2008

 

Pick up only!
Located near Eugene Oregon
$400 OBO

 

<FONT SIZE="5"><FONT COLOR="red"> LOWERED PRICE OF $2800..00!!!!! WITHOUT PARACHUTE. MOUNT WILL STILL BE THERE</FONT></FONT>


95 Civic Coupe..Clean Title
Full NHRA certified roll cage 8.50 or slower ( 1 yr left on certification)
Simpson Parachute
Window net
full interior minus back seats
del sol seats
kyb agx shocks
sumped fuel tank with bracket for aeromotive fuel pump
carbon fiber hood
painted Porsche grey metalic (painted a year ago)
engine bay wire tucked
4 wheel discs with sloted rotors
extended wheel studs
etc

Car has gone 9.51@160mph

All it needs is a motor and ready to roll...Most interior is still in it....Clean title

Asking 3500.00 OBO...Cage/Parachute mount is worth at least 3500.00

Or we can assemble together as a full race/street driven car for the buyer.

Stickers are all off the car already

Any questions please PM or email me at eric@hybrid-performance.com












Modified by Hybrid-Performance.com at 4:39 PM 1/15/2008


Modified by Hybrid-Performance.com at 3:10 PM 1/29/2008

 

I really don't want to let this car go, but I have taken a different direction and need the space.

93 Vx Hatch
Outside:
Painted S2K Gunmetal Gray through out
Vis Carbon fiber hood W/hood pins
Spoon replica mirrors
removed side moldings
has antenna cover

Inside:
6 Point Moly cage W/ swing outs
Ultra sheild seats W/ nice covers mint shape
5 Point harness out of date but mint shape for re cert
5 inch tach with hard mounted shift light
Entire interior is mint even sude door panel inserts to match the seats
whole interior comes with the car all clean and uncut black rear seats and panels all currently removed. could be installed with some cutting

Omni drag coilovers and rear lca's
Extended wheel studs

Fuel system is a sumped tank
A1000 -6 up -10 back braided lines
Aeromotive regulator
Golden eagle fuel rail










Whole car was rewired dash removed and cut down all a/c lines, heater core, vents have been removed. The car used to be b18cx's car, has been a best of 10.40. I have moved on to K series car and could not mess this one up. If I had enough money I would keep both...

Price: 4300 firm

 

2, B16 GOLDEN EAGLE SLEEVED BLOCKS FRESH JUST SLEEVED. 850EA.

DRIVESHAFT SHOP STAGE 5.9 AXLES, NO HUBS, WITH MOROSO TITANUIM INTERMEDIATE SHAFT AND NEW BEARING. 15 PASSES ON AXLES ONLY.
1300 SHIPPED

DRIVESHAFT SHOP STAGE 5.9 PASSENGERS AXLE. NEW NEVER USED HAD AS A SPARE INCASE ONE BROKE. 500 SHIPPED

2 MSD 7al2 part number 7224 used 200EA shipped

2 USED Tial 46mm wastegates, still work ok , had as spares, 250 ea shipped

TurboXS quad stage boost controller w/ msd timer box and controller 500 shipped

Moroso intake manifold for a gsr, used in great condition, just like golden eagle
400 shipped


Crower B16 custom billet stroker crank with steel billet rods, only used on dyno, the block must be machined for 89mm stroke
800 plus shipping, the crank cost me 1500.

EG drivers side MB PRODUCTS fiberglass door. 200 plus shipping





1994 HONDA CIVIC SHELL. SOLD NO DRIVETRAIN, ELECTRONICS, OR GAUGES
CAR IS THE OLD MOROSO CIVIC, I HAVE OWNED IT FOR 4 YEARS NOW AND ARE READY TO MOVE ON. THE CAR IS COMPLETELY AIRBRUSHED PAINT COST OVER 15,000. HAS A 1 PIECE FIBER GLASS NOSE. STILL HAS STEEL DOORS AND TRUNK LID. THE REAR HAS BEEN CUT OUT AND THE FIREWALL HAS BEEN REPLACE!!!! CAR WEIGHS 2610 WITH DRIVER OF 178. HAS A MILD STEEL CAGE THAT IS CERTIFIED TILL MID NEXT SEASON. HAS ONE PIECE CUSTOM REAR AXLE, AS THE FIRST WILWOOD CIVIC BRAKE SYSTEM, OMNI POWER DOUBLE ADJUSTABLE DRAG COILOVERS IN FRONT, COMP ENGINEERING SHOCKS IN REAR, HAS A NEW WHEELIE BAR SETUP JUST PUT IN FOR THE LAST 2 RACES OF THIS PAST YEAR. COMES WITH CUSTOM MIDPLATE WITH SCATTER SHIELD AND ENGINE MOUNTS. WELD RACING WHEELS WITH 2 RACE OLD 26/10.5/15 MT AND NEW SKINNYS IN THE BACK. CAR HAS GONE 9.79 @145 AND 10.1 AT 158 THAT WAS WITH A REALLY WORN OUT SET OF SLICKS AND A MANUAL BOOST CONTROLLER. BEST 60FT IS 1.45 AT ETOWN #2 LAST YEAR. CAR IS REALLY NICE AND WOULD HATE TO SELL BUT NEW PROJECT IS LAGGING BEHIND SCHEDULE AND NEEDS A MONEY PUSH. IM NOT SETTING A PRICE BUT WILL TAKE OFFERS. IF THE OFFER IS FAIR I WILL SELL. ALSO , I WILL DELIVER THE CAR UP TO 500 MILES FROM 02860 FOR FREE

PAYPAL MUST ADD 3%

Modified by ciscoscivic at 8:41 PM 1/11/2008


Modified by ciscoscivic at 8:59 PM 1/11/2008

 

Weld Magnum 2.0 15x8. 5x114.3 (4.5")
MT ET Streets DOT approved. 28x10.5x15
Wheels and tires have Only 5 passes on them. They were used on my NSX.
$900.00 obo for the package.

AEBS Cam seals NEW in package for B motor. I have 40 of them 35.00 each Shipped.

AIR Carbon fiber Intake manifold for B16/GSR head (dual bolt pattern) item is NEW in box. $1200.00 Shipped.

Adel wiggins 2" clamps NEW in package NO weld furrels included 75.00 shipped each, I have 4 availible. 1.25 clamps NO weld frrels either. 40.00 shipped i have 3 of them.





Modified by FastEK9 at 7:20 AM 1/18/2008

 

weldon fuel pump new part#a2005-c has been mounted to car but never had fuel line ran 400.00 plus shipping .

used halman manual boost controller 30.00 shipped
im located in indiana open for trades need b series mounts for eg ,hasport ,innovative ,avid .ect

 

Located in Cali and takeing any resonable offers.
H22 P&P head by bce, jun springs, rev valves and titanium retainers comes with all caps but no sensors and mani. Make offers or a stock head plus cash. Also willing to sell as a bare head.

h22 jun cams in good condition has about 3000 miles make resonable offers

h22 Twm itbs comes complet with fuel rail, fuel presure regulator, vacume box ready to drop in with bosch style injtors from twm 310 cc and also rc 650 cc injectors. Does not include the braded line or the nitrous kit unlesss an agreement is made
$1500






















h22 Prospeed header painted flat black $450
Header was repaired due to a buddy not using a flex pipe.

 

i have some b series parts. brand new in boxes. don't need them right now.
NEW wiseco gsr/itr pistons 81.5mm bore 11.8:1 $375
NEW RC 440cc injectors $175
NEW precision turbo 1000cc injectors $275
NEW Fluidyne full size radiator for 88-91 civic/crx retails $375+ asking $275 obo
NEW Arp b18a/b main studs brand new $100

used skunk2 intake manifold for gsr head only with gsr TB no sensors. $100









Modified by midnight94R at 6:53 PM 1/13/2008

 

Custom fabricated to fit a CRX with B16... its a tight fit, but it all fits under the hood! Perfect for that upcoming SFWD setup!


Includes PWR 6"x10" Barrel Intercooler (retails by itself for $855), One piece Charge piping from turbo to TB (this will likely have to be modified for your setup to hook to the turbo, but thats an easy fix). BOV flange for TiAL 50mm BOV, Custom Built Water Tank, Aluminum Heat Exchanger, GM water pump.

Asking only $1400 obo

This system works great, and fits even better! Have the coolest setup at the track!

 

i'm selling my whole turbo set up for a b series i'm going with a bigger setup whole kit has about 300 miles on it

KIT INCLUDES:
precision sc61 turbo

custom made 3in downpipe tapped for EGT)

custom made ram horn manifold with 44mm wastegate flange

precision 600hp intercooler

charge pipes for an Eg with greddy type RS BOV (Includes T-Bolts and 3ply couplers)

precision 880 injectors

looking to get $1600 plus shipping

 

I have a Bell racing helmet that I need to sell. This is the M4 model and is flat black. It has a SA2005 rating so it's good for a long while. I just bought it from Apex SPG about 2 months ago for $400 and have only worn it 4-5 times to break in the cushions otherwise it's brand new. It also comes with a deluxe helmet bag from Bell. This helmet will allow you guys to not just compete in drag racing but in road racing and other sports as well. The "SA" rating is accepted in every class and sanction as opposed to the "M" rating which is limited. These are the exact same bell helmets that pro teams use.

Rundown:
Bell M4 racing helmet
SA2005 rating
flat black
size: Large


$350

651-528-3257

 

$3500 OBO/WTT HAPPY NEW YEAR!
SERIOUS BUYERS ONLY. DONT MAKE OFFERS IF YOU DONT PLAN ON BUYING.
ALSO, I WOULDNT MIND A 94 UP INTEGRA (RUNNING) IF ANYONE WANTS TO TRADE! PREFFURE A 4 DOOR BUT DOSENT REALLY MATTER.

96 CIVIC HATCH ROLLING CHASSIS.
HEY I AQUIRED ROGER SCALISE OLD RACE CAR FROM SPEEDCAMP. I WAS GONNA BUILD IT BUT I HAVE NO TIME OR ROOM FOR IT. IF YOU KNOW IMPORT DRAG RACING THEN YOU ARE FAMILIAR WITH THIS CAR. ITS STILL SUPER CLEAN AND THE BODY IS IN GREAT SHAPE. CAR IS ALMOST READY TO GO JUST NEEDS MOTOR/WIRING AND A LIL FINISH FAB AND FRONT COIL OVERS.
-CHROMOLY CAGE
-STRANGE REAR COIL OVERS AND BRAKES
-NUFORMS REAR TRAILING ARMS
-CUSTOM RACING HART DRAG WHEELS. CAR WAS SPONSORED BY RH SO THEY MADE A CUSTOM SET OF DRAG WHEELS FOR IT.
-BULLETFPROOF HUBS AND SPINDLES.
-TUBULAR UPPER AND LOWER CONTROL ARMS
-MB ONE PIECE FRONT END
-MB DOORS
-FLAT UNDER BELLY
-SEATS MOUNTED
-GAUGES AND POD
-HYDRAULIC HAND BRAKE
ALSO AM WILLING TO TRADE FOR RUNNING (PREFURE STOCK) CAR.<U></U>
I MIGHT HAVE FORGOT SOME STUFF BUT YOU GOTTA COME SEE IT. ITS CLEAN AS F.... (714)366-1711

 

I have a few parts..

Gt4294r with 1.15a/r coated black Intake Housing is Polished and the ANTI Serge is deleted. Pick up more Boost,spool faster and Efficiency. Has the Oil orifice on the turbo as well. 1350.00 Pending



SLS Ram Horn Turbo manifold. Under liftime warrent. T3 Flange with Tial 44 Flange. 450.00





MSD Ignitor $35.00


Flexalight Cooler with -6am ends $35.00



Modified by buck02 at 9:20 AM 1/16/2008


Modified by buck02 at 2:59 PM 1/16/2008

 

NEW PRICES
all prices are final+shipping and paypal

B20 block aebs sleeves 85mm
needs to be bored $500


2007 civic si wheels new $300

comp clutch twin disc small spline
<U>discs only</U>200miles $200


gt4067 .69 p trim h cover $400
turbo is in working condition but has shaft play




complete fuel system $600
-10 line to A1000 pump, filter,-10 feed -8 return
aeromotive regulator all fittings included just need sumped tank and fuel rail




Drag intercooler $200


ALL ITEMS BELOW $50

aem b series fuel rail

aem 1 gen wide band

moroso oil pan


5 bolt .63 t3 exhaust housing

4 bolt .63 t3 exhaust housing


ALL ITEMS BELOW $100

2X type r valve cover

2x turbosmart 38mm wastegate
2x tial blowoff valve SOLD

hks 40mm wastegate

h-series drag manifold

Type-r wing black


Turbo XS BOV $50


Greddy BOV $100


X2 Fluidyne Radiator Integra- $100 Each



17x11x3 Intercooler 2.5 In\Out $100


All items do not include shipping.

Modified by GodFather of Boost at 8:55 PM 1/18/2008


Modified by GodFather of Boost at 11:36 PM 1/22/2008


Modified by GodFather of Boost at 1:59 AM 1/24/2008


Modified by GodFather of Boost at 2:51 AM 1/28/2008


Modified by GodFather of Boost at 3:01 AM 1/28/2008