this is all from an uncompleted racecar project i bought.these parts have been sitting for a while,so the rods and flywheel surface do have some light surface corrosion that can be removed easily....

CP pistons for H22.stock bore.looks like 9:1 compression.some wear on skirts.there's a nick on the edge of one piston,should be easily massaged out.$80:











7" long,2.5" diameter,350lb springs.$20+shipping.




stock replacement H-series clutch with plenty of life left:
$30.i'll add pics of it later


<U>SOLD!!!</U>Eagle rods for H22.part #5630HO.very good condition.$125<U>SOLD!!!</U>

<U>SOLD!!!!</U>Fidanza H-series flywheel.Very good condition,still has all the factory crosshatching on the friction surface.$100.:<U>SOLD!!!!</U>


<U>SOLD!!!</U>AEM cam gears for H-series.very good condition.keyway on one gear has some damage on the backside.still fits and works perfectly.$35:<U>SOLD!!!</U>


all prices plus shipping.located in Roanoke,VA.Paypal add 3%.plenty of vouches,just ask.
Thanks
Chris


Modified by TeamNextGenChris at 10:29 PM 1/3/2008


Modified by TeamNextGenChris at 9:19 PM 1/6/2008


Modified by TeamNextGenChris at 1:13 AM 1/8/2008


Modified by TeamNextGenChris at 1:15 AM 1/8/2008


Modified by TeamNextGenChris at 12:52 AM 1/11/2008


Modified by TeamNextGenChris at 12:56 AM 1/11/2008


Modified by TeamNextGenChris at 6:10 PM 1/12/2008


Modified by TeamNextGenChris at 9:54 PM 1/15/2008


Modified by TeamNextGenChris at 9:54 PM 1/15/2008


Modified by TeamNextGenChris at 5:04 PM 1/25/2008


Modified by TeamNextGenChris at 7:38 PM 1/29/2008


Modified by TeamNextGenChris at 5:11 PM 2/2/2008


Modified by TeamNextGenChris at 4:58 PM 2/4/2008


Modified by TeamNextGenChris at 4:59 PM 2/4/2008

 

lol how would somone go about fixing that piston?

any trades on rod/pistons?

 

clutch pics later today.i'll also be listing a Hondata S100 and turbo manifold!
Chris

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fibercation &raquo;</TD></TR><TR><TD CLASS="quote">lol how would somone go about fixing that piston?

any trades on rod/pistons?</TD></TR></TABLE>
simply sand down the imperfection.if i have time today i'll do it and post a new pic.
no trades-i just bought this stuff to resell to get money for my project.
Chris

 

PMs replied to.

 

also FS:7" long,2.5" diameter,350lb springs.$20+shipping.



Chris


Modified by TeamNextGenChris at 1:14 AM 1/8/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TeamNextGenChris &raquo;</TD></TR><TR><TD CLASS="quote">CP pistons for H22.stock bore(they measure right around 86mm),looks like 9:1 compression.</TD></TR></TABLE>

Not to blow your spot, but 86mm is not the stock bore for the H22, The stock bore size is 87mm.

 

prices lowered.
Chris

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM90CB7 &raquo;</TD></TR><TR><TD CLASS="quote">

Not to blow your spot, but 86mm is not the stock bore for the H22, The stock bore size is 87mm.</TD></TR></TABLE>
no spots blown.....yes,the stock bore is 87mm-i know this.there is some clearance required,otherwise the pistons would simply not move,so they are smaller than 87mm in diameter.my point is,they are stock bore size...
Chris

 

prices lowered,all items still for sale.
Thanks
Chris

 

still for sale!
Thanks
Chris

 

id get the rods/pistons off of you if you'd trade but im super hesitant to buy pistons that have that kinda of damage because i Doubt you can "sand" it down...i mean it is a precision part ya know

lmk if you change your mind

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fibercation &raquo;</TD></TR><TR><TD CLASS="quote">id get the rods/pistons off of you if you'd trade but im super hesitant to buy pistons that have that kinda of damage because i Doubt you can "sand" it down...i mean it is a precision part ya know

lmk if you change your mind</TD></TR></TABLE>
PM me with what you have to trade and i'll consider it.
i realize it's a precision part.the imperfection is minor IMO,and i think the price more than compensates considering they go for $450-$500 new.
Thanks
Chris

 

prices lowered.
Chris

 

prices lowered again.
Chris

 

still for sale.
Chris

 

Search my topics for stuff to trade

and my point is i dont want to throw down for somthing that turns out to be a unfixable paperweight ya know?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fibercation &raquo;</TD></TR><TR><TD CLASS="quote">Search my topics for stuff to trade

and my point is i dont want to throw down for somthing that turns out to be a unfixable paperweight ya know?</TD></TR></TABLE>
i understand...will search your FS posts.
Chris

 

prices lowered.
Chris

 

Sell the rods? dam i just sold my car...i woulda bought both

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fibercation &raquo;</TD></TR><TR><TD CLASS="quote">Sell the rods? dam i just sold my car...i woulda bought both</TD></TR></TABLE>
yes,pistons still FS though.
Chris

 

still for sale!
Chris

 

f'n flakers suck!
Chris

 

still for sale.
Chris

 

updated.
Chris