1991 Civic Standard (was a 4 speed)
Ls-swap Rally Cross Project

For Sale or Trade
$1300 OBO if selling
Lemme know what you have to trade - if its nice enough I can throw some cash toward a trade too... (looking for something honda-ish with backseats and an airbag, but I'm flexible).

I'm in Toledo Ohio.

b18a - pretty fresh rebuild <10K
ODB I Conversion
shortram
ACT HD clutch (320 ft/lbs or something like that - its stiff as hell)
JUN (or knock-off) Cromo lightweight flywheel (again it revs like a lightened flywheel, but I didn't do the build, so I don't know what kind of flywheel it is)
Extra long springs/shocks (only the rear are installed so far - need a camber kit to put camber back in if the fronts go in)
short shifter
Si Seats
new maintenance stuff (brakes/oil change/upper control arms/bolts)
crappy header
tanabe hyper medallion exhaust
Si dash w/106xxx miles (don't know how much is on the chassis)

The Bad
No carpet, it's just cloth layed in there to cover up the floor
gas filler neck has a leak - there's a new filler neck in the back seat, un-installed
Interior is a little torn up (steering wheel/radio)
Body is ugly - cancer is chopped out, but not fixed
2nd gear grinds when cold - everything is good once it is warm - I think it is clutch, not a tranny issue, but whatever.
Stupid ricer white-painted vents - already replaced some of this crap, just not all.

Crappy Cell Phone Pics on Friend's server








Modified by hades at 6:35 PM 1/3/2008


Modified by hades at 2:46 PM 1/10/2008

 

do u have anymore pics? i want to see the gas tank neck and why is the rear jackd up?

 

What else do you want pics of? - they'll all be the same quality (cell phone) but I can take pics of whatever you want.

The back is tall because this was a rally-cross project so it has longer struts/springs in the back (it'll come with the longer assemblies for the front too, but the camber needs to be corrected if those are installed - which is why they are not in right now).

The filler neck (which would be in already if it were not so f-ing cold right now) is rusted right where it goes into the tank - I'd have to pull the seat etc. to go get pics. Here's a pic of the replacement, which has rust starting in the same place where the other has a slight leak.

 

Because someone asked (and its dark out) here's a really crappy engine bay pic... (I'll get a better one in the light tomorrow - yes the valve cover is really baby blue)

Edit: I changed out the pic for one taken during the day




Modified by hades at 1:53 PM 1/4/2008

 

Hood where it got bent when some jacka** didn't put the pins back in before going for a drive. The windshield is brand new as a result.



Other recently replaced parts:
Alternator
plug wires
Front rotors
plugs
Drivers side front tire rod end and Upper control arm (the passenger probably needs to be replaced soon but I was going to do adjustable upper arms to dial in some camber once I put the longer struts in front.)

lemme know if anyone wants any other pics.

 

pic of spare shock/springs; it's dark right now, again, I'll get a better pic once the sun is out tomorrow...

 

More pics - obd I conversion harness & the wiring at the dizzy.

 

morning bump. Still for sale or trade.

Throw me some more trade offers or cash offers.

Parts/swap wise this is a pretty good deal even if you ditch the shell...

Let me know if you need pics or have questions etc...

 

one more motor pic and and intake pic by request