this is my first mani. iv ever attempted.
made from 1.5" sch 10 ss, its only tacked together now but will be tig weld pretty soon

 

pics are to big, can you make them even smaller?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snowseeker &raquo;</TD></TR><TR><TD CLASS="quote">pics are to big, can you make them even smaller?</TD></TR></TABLE>


the pics are kinda hard to see.

your op sd it was only tackd so im guessing your requesting feedback on how you have them run ? looks like one of the runners is alot shorter then the other 3.

just take some better pics of the collector and the inside of the pleneum after u get them all tigged and lets see them.

 

yea sorry, for the small pics
accuatually all the runners are fairly close to the same length but after its tig welded i will post up better pics.

 

not too bad for a first attemt

 

I think you should go into production and sell them on H-T for crackhead prices until your workload overwhelms you. At that point you'll start your second job at mcdonalds to help refund the money of cheap H-T n00bs that sent you money for a manifold. /scenario

looks great! where'd you buy your collector? What are you going to weld it with?

 

haha like you

 

i already work at micky Ds im hoping to make a career out of it, and dont worry im working over time alot so i can refund all the NooBs money i raped them of with this mani. that im going to mass produce. after all my main concern is making these and selling them not to put this on my car.

and as for the collector, i made it with cheese burgers i stole from mcdonalds. so dont get the idea that i may have made it myself threw hours of trial and error with pvc
and i plan on welding it with used cooking oil that hardens up at the seams... LOL

jk i dont plan on selling it BTW

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RTErnie &raquo;</TD></TR><TR><TD CLASS="quote">I think you should go into production and sell them on H-T for crackhead prices until your workload overwhelms you. At that point you'll start your second job at mcdonalds to help refund the money of cheap H-T n00bs that sent you money for a manifold. /scenario
</TD></TR></TABLE>

i fell for it once!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mitsuman &raquo;</TD></TR><TR><TD CLASS="quote">

i fell for it once!
</TD></TR></TABLE>

I think everyone does that at least once in their life. (just maybe not on honda tech)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RTErnie &raquo;</TD></TR><TR><TD CLASS="quote">I think you should go into production and sell them on H-T for crackhead prices until your workload overwhelms you. At that point you'll start your second job at mcdonalds to help refund the money of cheap H-T n00bs that sent you money for a manifold. /scenario

looks great! where'd you buy your collector? What are you going to weld it with?</TD></TR></TABLE>

Thats been done before.... give him some new ideas

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RCautoworks &raquo;</TD></TR><TR><TD CLASS="quote">

Thats been done before.... give him some new ideas

</TD></TR></TABLE>


One kidney for sale, best offer!

 

What causes these business' to crash are these things:
Crack head prices.

You cant maintain a business when your selling products for 1/2 of what they should be sold at. After Production costs and other hidden costs you end up in the hole and you find your thumb up your butt wondering how come your unable to grow and prosper.

foreal

To the OP:

Lookin good

I would put several tachs on there then make sure you prep the manifold really well. Should turn out nice.

 

thanks alot man, thats the kind of input i was lookng for

 

Looks good...pics are small though. Show pics of the finished mani.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RC000E &raquo;</TD></TR><TR><TD CLASS="quote">Looks good...pics are small though. Show pics of the finished mani.</TD></TR></TABLE>


With a naked girl holding it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by snowseeker &raquo;</TD></TR><TR><TD CLASS="quote">


With a beautiful naked girl holding it.</TD></TR></TABLE>

Fixed it. Leaving out that detail will let someone on here to post a pic of some nasty femalE.

 

ill get new pics up

 

 

 

You gonna weld the runners on or off? You gonna weld the collector first, then reattach the runners, or just weld away? The next steps make or break the thing.

 

unfourtunitly i do not have a tig welder only a mig so i have to have a buddy of mine weld it, he's been making and welding manifolds for quite some time so i know it will come out perfict so im not sure how hes going to weld it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH &raquo;</TD></TR><TR><TD CLASS="quote">

Fixed it. Leaving out that detail will let someone on here to post a pic of some nasty femalE. </TD></TR></TABLE>

Thank you, I fogot all about H-T people and thier warped minds.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedgsr1234 &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>


Looks good guy! in for some welded pics.

 

Nice job on the collecter joe! looks like it fits up nice and tight and that's not easy to do. I'm impressed.

What did you use for flanges?

 

i found a guy on H-T that had pretty good prices for flanges in canada but its just a basic b- series, a t3, and a 38mm tial