emblem removal question
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 1,600
Likes: 0
From: laguna niguel, ca, usa
whats the easiest way to removal the emblems from a 92-95 civic? i thought it was just adhesive but i guess there's 2 pin holes i gotta pry it out of? does anyone have any helpful tips?
have paitience..good judgement..never use metal on metal for this..plastic on metal
watch out for chrome plating..might wrinkle if bent too much/far, and watch out for damaging the sheetmetal on the car.
watch out for chrome plating..might wrinkle if bent too much/far, and watch out for damaging the sheetmetal on the car.
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 1,600
Likes: 0
From: laguna niguel, ca, usa
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Redline it. »</TD></TR><TR><TD CLASS="quote">have paitience..good judgement..never use metal on metal for this..plastic on metal
watch out for chrome plating..might wrinkle if bent too much/far, and watch out for damaging the sheetmetal on the car.</TD></TR></TABLE>
yeah i have a minor wrinkle or two but nothing serious, have you taken it off? if so how did you do it?
watch out for chrome plating..might wrinkle if bent too much/far, and watch out for damaging the sheetmetal on the car.</TD></TR></TABLE>
yeah i have a minor wrinkle or two but nothing serious, have you taken it off? if so how did you do it?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d[sick »</TD></TR><TR><TD CLASS="quote">sTeena]
yeah i have a minor wrinkle or two but nothing serious, have you taken it off? if so how did you do it?</TD></TR></TABLE>
- the pin holes are on the sides of the honda badge.. dont pry it off by the bottom or top. that will damage the hood/trunk/tailgate. pry it slowly side to side using a plastic prying tool little at a time on each side. dont rush it. if i can ill get pics ups later.
yeah i have a minor wrinkle or two but nothing serious, have you taken it off? if so how did you do it?</TD></TR></TABLE>
- the pin holes are on the sides of the honda badge.. dont pry it off by the bottom or top. that will damage the hood/trunk/tailgate. pry it slowly side to side using a plastic prying tool little at a time on each side. dont rush it. if i can ill get pics ups later.
Thread Starter
Honda-Tech Member
Joined: Nov 2005
Posts: 1,600
Likes: 0
From: laguna niguel, ca, usa
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aaronISthrowed »</TD></TR><TR><TD CLASS="quote">Use dental floss to break the glue and then it should just pop out.</TD></TR></TABLE>
theres no adhesive just some pain in the *** pins that wont come out
theres no adhesive just some pain in the *** pins that wont come out
ive ready people use dental floss... never tried it....
but what i do (and it works perfect, never scratched my paint once) is i use an OLFA blade and slide it under the logo... once all the adhesive is cut it will pop out easily
of course if you have jittery hands the dental floss is prolly a better idea
put your dental floss under the logo (a strand on each side) and just pull STRAIGHT up it will pop off
but what i do (and it works perfect, never scratched my paint once) is i use an OLFA blade and slide it under the logo... once all the adhesive is cut it will pop out easily
of course if you have jittery hands the dental floss is prolly a better idea
put your dental floss under the logo (a strand on each side) and just pull STRAIGHT up it will pop off
Thread
Thread Starter
Forum
Replies
Last Post
Honda_18
Honda Civic / Del Sol (1992 - 2000)
25
Dec 5, 2004 02:38 PM
joemama13
Honda Civic / Del Sol (1992 - 2000)
3
Oct 1, 2003 09:14 PM



