how much is it to chip a p28?
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 708
Likes: 0
From: southe el monte, us, california
how much is it to chip a p28?
i have a stock p28 and a chipped p28 my chipped one took a dump 
a friend of mine said i can probably still save the chip and i can install that chip to the stock p28 does anyone know how much it will cost to do that 
a friend of mine said i can probably still save the chip and i can install that chip to the stock p28 does anyone know how much it will cost to do that
Junior Member
Joined: Dec 2007
Posts: 92
Likes: 0
From: AT HOME, ca
Re: how much is it to chip a p28? (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">$5.
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
it would be like 185 after u *** up lol
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
it would be like 185 after u *** up lol
Honda-Tech Member
Joined: Jan 2006
Posts: 10,443
Likes: 2
From: Rochester, New York -> Santa Clara, CA
Re: how much is it to chip a p28? (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">$5.
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
Yup, basically. Although I think it's like $10 if you want a returnable chip in there.
@ OP:
It, like anything else is labor based, you pay for the labor, usually it's around 80 bucks or so, I got a friend out in Cali who could hook u up with a basemap re-burnable chip for cheaper than any of the sponsored guys on H-T - hit me up via PM for details.
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
Yup, basically. Although I think it's like $10 if you want a returnable chip in there.
@ OP:
It, like anything else is labor based, you pay for the labor, usually it's around 80 bucks or so, I got a friend out in Cali who could hook u up with a basemap re-burnable chip for cheaper than any of the sponsored guys on H-T - hit me up via PM for details.
Ek Forever y0!
Joined: May 2005
Posts: 16,712
Likes: 9
From: Beating people with a stick, GA
Re: how much is it to chip a p28? (beefcake)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beefcake »</TD></TR><TR><TD CLASS="quote">it would be like 185 after u *** up lol </TD></TR></TABLE>
Retards and turrets kids expletive up a soldering iron.
Retards and turrets kids expletive up a soldering iron.
Trending Topics
Joined: Aug 2007
Posts: 126
Likes: 0
Re: how much is it to chip a p28? (agent420)
I work for a circut board manufacturing company. It cost me about $3 for all the stuff installed myself.. But if i were you i would get on http://www.xenocron.com And buy the kit. It also has the link to instructions.
Thread Starter
Honda-Tech Member
Joined: Dec 2007
Posts: 708
Likes: 0
From: southe el monte, us, california
Re: how much is it to chip a p28? (agent420)
o by the way im not sure wut chip it has the chip reads
ATMEL
at29c256
90pc
0235
DO ANY OF U GUYS HAPPEN TO KNOW UT KIND OF CHIP IT IS
ATMEL
at29c256
90pc
0235
DO ANY OF U GUYS HAPPEN TO KNOW UT KIND OF CHIP IT IS
Honda-Tech Member
Joined: Aug 2006
Posts: 272
Likes: 0
Re: how much is it to chip a p28? (agent420)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by agent420 »</TD></TR><TR><TD CLASS="quote">o by the way im not sure wut chip it has the chip reads
ATMEL
at29c256
90pc
0235
DO ANY OF U GUYS HAPPEN TO KNOW UT KIND OF CHIP IT IS </TD></TR></TABLE>
what do you want to know about it?
its a good one. its also an EEPROM
ATMEL
at29c256
90pc
0235
DO ANY OF U GUYS HAPPEN TO KNOW UT KIND OF CHIP IT IS
</TD></TR></TABLE>what do you want to know about it?
its a good one. its also an EEPROM
cute little bastard
Joined: Aug 2004
Posts: 7,086
Likes: 0
From: Sersey Jhore
Re: how much is it to chip a p28? (agent420)
Guest
Posts: n/a
Re: how much is it to chip a p28? (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">
Retards and turrets kids expletive up a soldering iron.</TD></TR></TABLE>
Actually its very easy to mess it up.
Too much heat, and you can fry a board.
too sloppy with the solder and you can bridge a connection
Anyways- skoundrel nailed it on the head
Sell the P28, and buy one already chipped lol
Retards and turrets kids expletive up a soldering iron.</TD></TR></TABLE>
Actually its very easy to mess it up.
Too much heat, and you can fry a board.
too sloppy with the solder and you can bridge a connection
Anyways- skoundrel nailed it on the head
Sell the P28, and buy one already chipped lol
Trial User
Joined: Sep 2017
Posts: 1
Likes: 0
Re: how much is it to chip a p28? (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">$5.
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
Yup, basically. Although I think it's like $10 if you want a returnable chip in there.
@ OP:
It, like anything else is labor based, you pay for the labor, usually it's around 80 bucks or so, I got a friend out in Cali who could hook u up with a basemap re-burnable chip for cheaper than any of the sponsored guys on H-T - hit me up via PM for details.
Chips cost that much, and if you have a soldering Iron, that's free.</TD></TR></TABLE>
Yup, basically. Although I think it's like $10 if you want a returnable chip in there.
@ OP:
It, like anything else is labor based, you pay for the labor, usually it's around 80 bucks or so, I got a friend out in Cali who could hook u up with a basemap re-burnable chip for cheaper than any of the sponsored guys on H-T - hit me up via PM for details.
Thread
Thread Starter
Forum
Replies
Last Post
LvN
Southern California (Sales)
16
Jan 1, 2007 11:36 AM
1990hondaHF
Honda Civic / Del Sol (1992 - 2000)
5
Sep 19, 2003 07:38 PM
