Mugen N1 ECU/Endyn Breather Tank/Buddy Club Voltage Regulator/Takata Harness
Thread Starter
Kill Gil
Joined: May 2003
Posts: 13,286
Likes: 0
From: San Diego, CA
Mugen N1 ECU/Endyn Breather Tank/Buddy Club Voltage Regulator/Takata Harness
Mugen N1 ECU
This is specially mapped to the fuel mixture, ignition timing, and combustion. The rev limit is increased to 9,100 rpm from the normal 8,400 rpm, and the VTEC valve timing changeover point is lowered to 4,700 rpm from the normal 5,300 rpm. It is highly recommended that reinforced valve springs be fitted if this E.C.U. is used
ECU is in great condition and works flawlessly. A must for any die hard Mugen enthusiast
Retail price was $1250 when it was still in production. $700 shipped firm add $50 if you want the real Hondata OBD2b-2a Jumper harness
Hondata Jumper Harness
Modified by GUILOTINE at 10:28 PM 1/8/2008
This is specially mapped to the fuel mixture, ignition timing, and combustion. The rev limit is increased to 9,100 rpm from the normal 8,400 rpm, and the VTEC valve timing changeover point is lowered to 4,700 rpm from the normal 5,300 rpm. It is highly recommended that reinforced valve springs be fitted if this E.C.U. is used
ECU is in great condition and works flawlessly. A must for any die hard Mugen enthusiast
Retail price was $1250 when it was still in production. $700 shipped firm add $50 if you want the real Hondata OBD2b-2a Jumper harness
Hondata Jumper Harness
Modified by GUILOTINE at 10:28 PM 1/8/2008
Thread Starter
Kill Gil
Joined: May 2003
Posts: 13,286
Likes: 0
From: San Diego, CA
Re: Mugen N1 ECU/Endyn Breather Tank/Buddy Club Voltage Regulator/Takata Harness (mtny)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mtny »</TD></TR><TR><TD CLASS="quote">Alot of good **** you're selling as of late!!!</TD></TR></TABLE>
I'm trying
I'm trying
overrated.
Joined: Nov 2002
Posts: 3,806
Likes: 0
From: Honda Retiree
Re: Mugen N1 ECU/Endyn Breather Tank/Buddy Club Voltage Regulator/Takata Harness (GUILOTINE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE »</TD></TR><TR><TD CLASS="quote">
I'm trying </TD></TR></TABLE>
i'm sure you won't have to try hard
I'm trying
</TD></TR></TABLE>i'm sure you won't have to try hard
Trending Topics
Thread Starter
Kill Gil
Joined: May 2003
Posts: 13,286
Likes: 0
From: San Diego, CA
Re: (typerman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by typerman »</TD></TR><TR><TD CLASS="quote">bump for an awsome ecu,simply the best mod for a stock r with bolt ons </TD></TR></TABLE>
</TD></TR></TABLE>
