Error Code help
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 296
Likes: 0
From: philadelphia, pa, united states
Error Code help
Hey H-T, so today on my way to work my CEL comes on...goddamit ****. So I'm stressing about it for awhile, come home from work pull the code and it...blinks Once. I tried it about a hundred times and I'm not quite sure what the code means. It is a 10, a 1 or something else? Any help would be appreciated. Merry Xmas eve everyone
Honda-Tech Member
Joined: Mar 2006
Posts: 2,026
Likes: 0
From: New Orleans, LA
Thread Starter
Honda-Tech Member
Joined: Sep 2006
Posts: 296
Likes: 0
From: philadelphia, pa, united states
Re: Error Code help (-Gary-)
Yea...I've seen that. Thanks tho. Not quite sure if its a 1 or a 10.
Plus oddly enough, it blinks whether I jump the service connector or not.
Plus oddly enough, it blinks whether I jump the service connector or not.
Honda-Tech Member
Joined: Aug 2007
Posts: 271
Likes: 0
From: Vacoas/phoenix, Mauritius
If it shows like that ......................... then its 10,but if it is like this one ......... then its 1.So code 10 indicates IAT intake air temperature sensor,code 1 indicates primary oxygen sensor.
Honda-Tech Member
Joined: Jan 2006
Posts: 10,443
Likes: 2
From: Rochester, New York -> Santa Clara, CA
Re: (baulum)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by baulum »</TD></TR><TR><TD CLASS="quote">If it shows like that ......................... then its 10,but if it is like this one ......... then its 1.So code 10 indicates IAT intake air temperature sensor,code 1 indicates primary oxygen sensor.</TD></TR></TABLE>
Yes, the link was referenced twice.
Thank you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedooo »</TD></TR><TR><TD CLASS="quote">unplug the ecu to reset it and see if it comes back on. might just be something stupid like not tightening your gas cap enough</TD></TR></TABLE>
I'd try this first.
Then, listen to this dude:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cln92eg »</TD></TR><TR><TD CLASS="quote">How long did it blink for cause if it was ten it would blink for a sec and thats. If its one it will bilnk half a sec nothing more </TD></TR></TABLE>
A single digit is like 3-5/10ths of a second. A "10" is a full solid second. Then don't forget it's in an infinite loop so there's about a 2 second delay and it'll flash the code(s) again.
If you can't figure it out, video record it.
PS:
I know the feeling of when you die a little inside when you see that light come on
.
Yes, the link was referenced twice.
Thank you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by speedooo »</TD></TR><TR><TD CLASS="quote">unplug the ecu to reset it and see if it comes back on. might just be something stupid like not tightening your gas cap enough</TD></TR></TABLE>
I'd try this first.
Then, listen to this dude:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cln92eg »</TD></TR><TR><TD CLASS="quote">How long did it blink for cause if it was ten it would blink for a sec and thats. If its one it will bilnk half a sec nothing more </TD></TR></TABLE>
A single digit is like 3-5/10ths of a second. A "10" is a full solid second. Then don't forget it's in an infinite loop so there's about a 2 second delay and it'll flash the code(s) again.
If you can't figure it out, video record it.
PS:
I know the feeling of when you die a little inside when you see that light come on
.
Thread
Thread Starter
Forum
Replies
Last Post
