Fully Built 94 civic EX coupe - Turbo over 300whp
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 319
Likes: 0
From: knoxville, TN, USA
Fully Built 94 civic EX coupe - Turbo over 300whp
I am selling my 94 civic ex coupe, it is fully built D16z6 and transmission.
The parts in and on the motor:
Darton Sleeves
Eagle H-beams
CP-pistons
Ferrea Valves
Comp cam 59300
Comp valve springs
Skunk2 intake manifold
AEM adj cam gear
Port and polish job
Hasport Motor mounts
Precision 680cc injectors
ACT Extreme street clutch and 11lb flywheel
Greddy EVO2 exhaust
Turbo Components:
all the piping was fabbed by a shop here in Knoxville, He also did the manifold
The turbo is a GT30 style built by Master Power, it is a 70mm cold side with a 48 hot side... It is very responsive.
Tial Wastegate and BOV
Tuned with Chrome Pro
Transmission:
Fully built stage 2 Gearspeed transmission:
New bearings, carbon coated syncros, steel shift forks, and A Quaife LSD
Right now I can't think of anything else any questions PM me... I HAVE OVER 14,000 IN THE MOTOR. I am asking 10,000 OBO. I only have 2800 miles on the whole setup. The reason for selling this, is to get a house. Living at the parents house is killing me. Here are some pics of the car.
This car is done right, there has not been a penny sparred... SERIOUS OFFERS ONLY. I will entertain a resonable offer.
Modified by stealthcivic94 at 2:46 PM 12/19/2007
Modified by stealthcivic94 at 2:48 PM 12/19/2007
The parts in and on the motor:
Darton Sleeves
Eagle H-beams
CP-pistons
Ferrea Valves
Comp cam 59300
Comp valve springs
Skunk2 intake manifold
AEM adj cam gear
Port and polish job
Hasport Motor mounts
Precision 680cc injectors
ACT Extreme street clutch and 11lb flywheel
Greddy EVO2 exhaust
Turbo Components:
all the piping was fabbed by a shop here in Knoxville, He also did the manifold
The turbo is a GT30 style built by Master Power, it is a 70mm cold side with a 48 hot side... It is very responsive.
Tial Wastegate and BOV
Tuned with Chrome Pro
Transmission:
Fully built stage 2 Gearspeed transmission:
New bearings, carbon coated syncros, steel shift forks, and A Quaife LSD
Right now I can't think of anything else any questions PM me... I HAVE OVER 14,000 IN THE MOTOR. I am asking 10,000 OBO. I only have 2800 miles on the whole setup. The reason for selling this, is to get a house. Living at the parents house is killing me. Here are some pics of the car.
This car is done right, there has not been a penny sparred... SERIOUS OFFERS ONLY. I will entertain a resonable offer.
Modified by stealthcivic94 at 2:46 PM 12/19/2007
Modified by stealthcivic94 at 2:48 PM 12/19/2007
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 319
Likes: 0
From: knoxville, TN, USA
Re: (Jimmy)
10 is steep 
??? You couldn't buy the parts in engine compartment for 10. The transmission is $2200 by itself. $1500 just to get the block Sleeved 
. I will entertain any REASONABLE offer TRUST ME 
!!! Thanks for the bump
Dave down at OTT did all the piping and the manifold and most of the assembly of the engine.
If anybody needs secondary opinions about the car. Feel free to call Dave at Over The Top (865)692-1448
Modified by stealthcivic94 at 2:59 PM 2/1/2008
??? You couldn't buy the parts in engine compartment for 10. The transmission is $2200 by itself. $1500 just to get the block Sleeved . I will entertain any REASONABLE offer TRUST ME !!! Thanks for the bumpDave down at OTT did all the piping and the manifold and most of the assembly of the engine.
If anybody needs secondary opinions about the car. Feel free to call Dave at Over The Top (865)692-1448
Modified by stealthcivic94 at 2:59 PM 2/1/2008
Trending Topics
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 319
Likes: 0
From: knoxville, TN, USA
Re: Fully Built 94 civic EX coupe - Turbo over 300whp (dcp48)
no... Sorry to dissapoint I need to sell the car as a whole... now if for some reason a someone I know buys my motor and I need to sell the rolling chassis. I would probably take 1000 to 1500. BUT I WON'T BE SELLING A ROLLING CHASSIS unless someone buys my motor first.
