some updated 400+whp SOHC engine shots
just some updated engine shots..









Engine
-darton sleeved d16z6
-arias 9.0:1 pistons
-eagle h-beam rods
-ARP everything
-micropolished crank, etc.
-fully port and polished head
-supertech oversized vavles
-supertech valve springs
-supertech titanium retainers
-zex/comp cams 59300 cam
-aem adjustable cam gear
-gates racing timing belt
-mishimoto 24x12x3 intercooler
-RLD-FAB SS ramhorn manifold
-tial 38mm wastegate (race valve)
-precision sc34 t3/t4 turbo, 57 trim .63a/r exhaust, ball bearing and watercooled
-gm 3.0 bar map sensor
-fast-turbo oil line kit
-greddy oil filter adaptor
-precision 780cc injectors
-B16 60mm throttlebody (portmatched to stock intake)
-aem fuel rail
-k&n air filter
-hondata thermal intake gasket
-aeromotive fuel press. regulator
-marshall fuel psi gauge
-innovative full race 85a rear mount
-avid front torque mounts
-walbro 255 fuel pump
-russell ss braided fuel line
-greddy breather catch can
-moroso valve cover breather tank
-mishimoto aluminum radiator
-koyo high psi radiator cap
-2300cfm slim fan
-hallman pro boost controler
-50mm blow off valve
-3" stainless steel open downpipe
-action 2md 6 puck clutch
-hondata s300 p28
Transmission
-PIC performance 4.7 final drive
-OBX limited slip differential
-RacerStev heat treated gears
-gearspeed carbon coated syncros
-fidanza cv axles
Suspension
-full race traction bar
-PIC performance drag coilover setup
-megan racing lower control arms with ES bushings
-integra rear sway bar
-Si front sway bar
-lower tie bar
-revo technica camber kit
Brakes
-brembo discs
-goodridge ss brake lines
-axxis metal master pads
-Si rear disc conversion
Interior
-plx m-300 wideband gauge
-proform shift light
-autometer pillar pod
-faze gauges (tach, water, boost, oil psi, volts, egt)
-apex'i rev/speed meter
-indiglo gauges
-si door panels rewrapped
-apc racing seats
-b&m short shifter
-prothane shifter bushings
-ractive pedals
Exterior
-front: rota gt3 15" wheels with 225 bfg drag radials
-rear: rota gt3 16" wheels with falken azenis rt-615 tires
-lenso vpd 13" racing wheels with 24.5x8x13 MT slicks
-carbon fiber hood with locks
-wings west duckbill
-wings west midwing
-wings west rs sideskirts
-"mugen" front lip
-"type r" rear lip
-"spoon" cf mirrors
-"vision" corner lights
-vx rear diffuser
-20% tint
thats not everything, but you get the idea.. LOL
Modified by mike93eh2 at 9:30 PM 12/13/2007
Engine
-darton sleeved d16z6
-arias 9.0:1 pistons
-eagle h-beam rods
-ARP everything
-micropolished crank, etc.
-fully port and polished head
-supertech oversized vavles
-supertech valve springs
-supertech titanium retainers
-zex/comp cams 59300 cam
-aem adjustable cam gear
-gates racing timing belt
-mishimoto 24x12x3 intercooler
-RLD-FAB SS ramhorn manifold
-tial 38mm wastegate (race valve)
-precision sc34 t3/t4 turbo, 57 trim .63a/r exhaust, ball bearing and watercooled
-gm 3.0 bar map sensor
-fast-turbo oil line kit
-greddy oil filter adaptor
-precision 780cc injectors
-B16 60mm throttlebody (portmatched to stock intake)
-aem fuel rail
-k&n air filter
-hondata thermal intake gasket
-aeromotive fuel press. regulator
-marshall fuel psi gauge
-innovative full race 85a rear mount
-avid front torque mounts
-walbro 255 fuel pump
-russell ss braided fuel line
-greddy breather catch can
-moroso valve cover breather tank
-mishimoto aluminum radiator
-koyo high psi radiator cap
-2300cfm slim fan
-hallman pro boost controler
-50mm blow off valve
-3" stainless steel open downpipe
-action 2md 6 puck clutch
-hondata s300 p28
Transmission
-PIC performance 4.7 final drive
-OBX limited slip differential
-RacerStev heat treated gears
-gearspeed carbon coated syncros
-fidanza cv axles
Suspension
-full race traction bar
-PIC performance drag coilover setup
-megan racing lower control arms with ES bushings
-integra rear sway bar
-Si front sway bar
-lower tie bar
-revo technica camber kit
Brakes
-brembo discs
-goodridge ss brake lines
-axxis metal master pads
-Si rear disc conversion
Interior
-plx m-300 wideband gauge
-proform shift light
-autometer pillar pod
-faze gauges (tach, water, boost, oil psi, volts, egt)
-apex'i rev/speed meter
-indiglo gauges
-si door panels rewrapped
-apc racing seats
-b&m short shifter
-prothane shifter bushings
-ractive pedals
Exterior
-front: rota gt3 15" wheels with 225 bfg drag radials
-rear: rota gt3 16" wheels with falken azenis rt-615 tires
-lenso vpd 13" racing wheels with 24.5x8x13 MT slicks
-carbon fiber hood with locks
-wings west duckbill
-wings west midwing
-wings west rs sideskirts
-"mugen" front lip
-"type r" rear lip
-"spoon" cf mirrors
-"vision" corner lights
-vx rear diffuser
-20% tint
thats not everything, but you get the idea.. LOL

Modified by mike93eh2 at 9:30 PM 12/13/2007
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DxHatchback »</TD></TR><TR><TD CLASS="quote">Any exterior pics?</TD></TR></TABLE>










Trending Topics
yea i remember this hatch from awhile back as well, i think it had altezza and some more kinda ricey stuff, i remember it cuz of the license plate. i know cuz i had the same evil smile i have at this moment when i think about 400hp sohc >8 |)
sick car dude
sick car dude
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brewer »</TD></TR><TR><TD CLASS="quote">Nice!
</TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Thurman Merman »</TD></TR><TR><TD CLASS="quote">Did this hatch ever get stolen? I think a while back i remember hearing something.
Always remember that midwing and nice #s, good stuff
</TD></TR></TABLE>
nope, never stolen and never will be. impossible unless the theif survives multiple gunshots to the chest.
Always remember that midwing and nice #s, good stuff
</TD></TR></TABLE>nope, never stolen and never will be. impossible unless the theif survives multiple gunshots to the chest.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by UCLA.lion »</TD></TR><TR><TD CLASS="quote">this thing must sound like a monster ahha
have any sound clips or track or any footage of it w/ sound?</TD></TR></TABLE>
nothing that clear but here ya go..
thanks for the commments guys
open downpipe in the vid. i dont have a exhaust anymore..
http://videos.streetfire.net/v...3.htm
have any sound clips or track or any footage of it w/ sound?</TD></TR></TABLE>
nothing that clear but here ya go..
thanks for the commments guys
open downpipe in the vid. i dont have a exhaust anymore..
http://videos.streetfire.net/v...3.htm
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Genuine Rolla »</TD></TR><TR><TD CLASS="quote">Very sick bro...!
What color is that..?</TD></TR></TABLE>
Captiva Blue Pearl.
Sick SOHC.
What color is that..?</TD></TR></TABLE>
Captiva Blue Pearl.
Sick SOHC.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B2FiNiTY »</TD></TR><TR><TD CLASS="quote">yikes, agressive final drive with so much power </TD></TR></TABLE>
not really.. i have taller tires as well. i should of went to a 4.9
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Simmerman »</TD></TR><TR><TD CLASS="quote">Loving the license plate..
Made me think about building a SOHC-T for my EF for a minute.. But I already have my B20.
Whats the exact #s on what PSI?</TD></TR></TABLE>
well last november it put down 403whp and 310 ft lbs on 25psi... but that was last year. ive done soooooo much **** to it since then and will be back on the new dyno here soon so we will see what it currently has and try to get even more power out of it.. i want reliable 10's. i cant wait till next year when the tracks around here open back up to see what shes got
not really.. i have taller tires as well. i should of went to a 4.9

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Simmerman »</TD></TR><TR><TD CLASS="quote">Loving the license plate..
Made me think about building a SOHC-T for my EF for a minute.. But I already have my B20.
Whats the exact #s on what PSI?</TD></TR></TABLE>
well last november it put down 403whp and 310 ft lbs on 25psi... but that was last year. ive done soooooo much **** to it since then and will be back on the new dyno here soon so we will see what it currently has and try to get even more power out of it.. i want reliable 10's. i cant wait till next year when the tracks around here open back up to see what shes got
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G3NR8 »</TD></TR><TR><TD CLASS="quote">SICK! Good work man. Thats gotta rip
</TD></TR></TABLE>
hopefully it will in 08
</TD></TR></TABLE>hopefully it will in 08
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by G3NR8 »</TD></TR><TR><TD CLASS="quote">SICK! Good work man. Thats gotta rip </TD></TR></TABLE>





