FS: Garrett T3/T04E 57 trim .63 A/R 4-bolt Turbo
Thread Starter
Honda-Tech Member
iTrader: (3)
Joined: Jan 2000
Posts: 10,180
Likes: 3
From: Bloomington, IN, USA
(qty 1) Garrett T3/T04E Turbo - $390 shipped
.57 trim compressor wheel
.stage III turbine wheel
.60 A/R Compressor housing
.63 A/R Turbine housing
.4-bolt downpipe
.2.75" compressor inlet
.2" compressor outlet
.aluminum 1/2" NPT female oil drain adapter included (installed)
.Aeroquip 45 deg 1/2" NPT to -10AN steel adapter included (installed)
.Aeroquip 90 deg 1/4" NPT to -4AN aluminum oili feed adapter (installed)
.from a Peakboost turbo kit
.used for less than 10k miles
.put down 450whp on pump gas with this turbo @ 22psi
.never run on anything more than 23 to 24psi




Modified by IN VTEC at 11:28 AM 3/12/2008
.57 trim compressor wheel
.stage III turbine wheel
.60 A/R Compressor housing
.63 A/R Turbine housing
.4-bolt downpipe
.2.75" compressor inlet
.2" compressor outlet
.aluminum 1/2" NPT female oil drain adapter included (installed)
.Aeroquip 45 deg 1/2" NPT to -10AN steel adapter included (installed)
.Aeroquip 90 deg 1/4" NPT to -4AN aluminum oili feed adapter (installed)
.from a Peakboost turbo kit
.used for less than 10k miles
.put down 450whp on pump gas with this turbo @ 22psi
.never run on anything more than 23 to 24psi




Modified by IN VTEC at 11:28 AM 3/12/2008
Thread
Thread Starter
Forum
Replies
Last Post
rhdune16
Classifieds: Forced Induction
17
Oct 28, 2004 11:30 PM




