i just recently bought a 1991 civic hatchback with a b16a swap in it. ive done a few mods to it heres some pics.

 

when i first got it but had steelies

ripping out the old blue carpet

the b16 swap

leather hyandai seats installed

crx dash installed

and door panels

fully gutted back with all my ****

prepped for primer

we realigned all the doors fenders and hood

 

 

lol fully gutted huh
those hyandai seats
were they a direct swa
never seen that
so what are the plans full race?

 

i see some used trays.

did you use the entire crx dash or just the center console?

 

the dash is 100% crx hf and consol my plans are to take the block and do an all motor build ctr pistons eagle rods acl race bearings the trays i was drifting the other night lol had em under my back wheels with the e-brake pulled


i bought this bare block and crank last night for $50

b16A

started working on the body again today

air craft stripped all the spots i have to bondo down to bare metal

all my supplies bonda primer 60 grit sand paper

had some on the back too

cleanin up the gsr wheels too

nice little spot on my hood i had to do

 

looks good!
keep up the work!

 

lookin preety good,I'd lose the hyundai seats they don't belong in a HONDA

 

sweet keep up the work. i want to see it painted.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trustnoone7935 &raquo;</TD></TR><TR><TD CLASS="quote">lookin preety good,I'd lose the hyundai seats they don't belong in a HONDA </TD></TR></TABLE>

whatever floats his boat.

can't wait to see it when its painted and all. what color are you planning to go with?

 

looks like my engine bay when i got my car but now its all pertyfide and looks nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trustnoone7935 &raquo;</TD></TR><TR><TD CLASS="quote">lookin preety good,I'd lose the hyundai seats they don't belong in a HONDA </TD></TR></TABLE>if they work, why not?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trustnoone7935 &raquo;</TD></TR><TR><TD CLASS="quote"> lookin preety good,I'd lose the hyundai seats they don't belong in a HONDA </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Smokinsax &raquo;</TD></TR><TR><TD CLASS="quote">if they work, why not? </TD></TR></TABLE>

CAuZ THE TIBURON TYPE AR USE A DIFF VTEX!

what a gay thing to complain about, they actually look more in place then many other seats ive seen put in our cars. ITR seats look expletive ugly in EFs/EDs, the shoulder bolsters are about 4mm away from each other.

 

lol if that airplane stripper got to those tires it prolly did some nice tearing damage ....nice thread man, keep up the good work

 

the seats lined up great. i did have to bend them down to be flush with the holes cause the brackets were all straight. the engine wiring is a mess. the swap was done when i bought the car the guy who did the wiring chopped the whole wiring harness and redid it with connecters. the inject are ran with a positive from the battery to the converter box then each injector is grounded seprately. ******* blah im tearig out all the wiring tomorrow and redoing it. i also today bought all of my obd1 conversion **** woot woot so ill be converted and totaly tunable. i just recently put gsr cams in as well. my paint is going to be a pale lookin green almost armyish

 

I'm interested int he Hyundai seats as well.

I think they looks pretty slick from that one pic that you have posted.

Any more info on them?

- What did they come out of?
- Installations procedure

Etc....basically a write-up if you are willing

 

they came out of a 99 tiburon. they are very similar to the 91 hatchs because the brackets line up perfect. the only flaw is the tiburon brackets are not bent for the holes they are straight but a trusty hammer fixed that. u have to keep the stock honda bolts as the hyandai will not fit and u will need to drill 1 hole for one of the front bracket holes as it is off slightly from the honda holes.

well for today i worked on the car for a good 5 or 6 hours. got all the body work done. bondod all my rough spots and bondod the holes where the honda emblems went


bondo on the hood

heres the close up

big spot where hond was and the emblem holes in the middle

the back all sanded down

sorta close up

all sanded down

close up

i thought u guys mite like this me mixing my putty on a giant cookie lol

after it was all said and dun i started to prime a litle but it was too cold the paint was bubbling

 

nice keep us updated.

 

if you hadn't have said they were hyundai seats, everyone would be asking "Oh man, where'd you get those sweet leather seats?!"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman &raquo;</TD></TR><TR><TD CLASS="quote">if you hadn't have said they were hyundai seats, everyone would be asking "Oh man, where'd you get those sweet leather seats?!"</TD></TR></TABLE>

haha they look kinda similiar to a 95 ls teg leather seats to me.

but were the cookies good?

coming along good

 

actually that ad came from some cookie sheets i bought the other night and was drifitng on i never got to make cookies lol

 

no cookies

never seen red hardener. usually a bluish green, whats the brand you bought?

any plan on painting the bumpers as well?

 

its just some el cheepo wal mart **** but it worked great

 

i started my wiring today. put on some new plugs got everything looking good. ill take it all up and finish it up tomorrow i ran out of solder. i also orderd all my obd1 stuff today wot woot computer jumper harness and distributor

 

you need to give me your engine i would like that