i was looking for the jdm red H for the steering wheel, and all i found was this red H sticker for it, it looked good but i'm wondering if theres a emblem for it i should get?

 

you replace the entire air bag. or the cover from it. that's with the real jdm one

 

This guy is not spending $200 - $300 on a new bag + wiring. F that.

 

use a crayon?

 

You could always get the Type R Momo wheel. It will cost around $450 and the airbag will not function correctly.

 

unless you convert your SRS to single stage like the JDM one.

 

The entire system?

 

yes. it eliminates the seats and the steering wheel turns into a single stage as opposed to the usdm dual stage. a guy did that on crsx.

 

where can u get he red H sticker?

 

You can sell me your Ep3 steering wheel. Then use the money that I give you towards a type-r wheel.

 

A guy on ClubRSX sells them, look in the interior/exterior for sale threads.

His name is DC5 SLIM or something close to that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pornstarSR &raquo;</TD></TR><TR><TD CLASS="quote">use a crayon?</TD></TR></TABLE>

hahah

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by johnclaunch &raquo;</TD></TR><TR><TD CLASS="quote">You could always get the Type R Momo wheel. It will cost around $450 and the airbag will not function correctly. </TD></TR></TABLE>

as far as not functioning. I made this work on my RSX with the JDM ITR wheel. All you have to do is swap the igniter's. Meaning take your OEM igniter off of your OEM airbag and replace the JDM one. You will have to reset your SRS light afterwards; which only takes two minutes.


The igniter is the piece on the back of the airbag with the plug, you will have to use vice grips to remove the four oddly shaped bolts, but I have done this and it does work completely fine.

 

what did you do with the extra wires?

 

there are no extra wires. You just swap the igniter off of your OEM Acura airbag and take off the JDM Honda igniter and just bolt on your OEM Acura airbag to your JDM airbag. (The Igniter is the round device on the back of the airbag with the plug)

 

so you managed to turn it from a dual stage to a single stage?

 

Our USDM cars are Dual Stage. I turned the JDM ITR Wheel to a Dual Stage. And the best part is I have no light and a functional airbag.

 

This is a picture of what I'm taking about.... this is the back of the JDM airbag (Single Stage) so what I did was unbolt the four bolts holding the detonator to the back of the airbag and swap the USDM detonator to the JDM airbag.



EDIT: when I've used Igniter I ment to use Detonator**

 

aaah got you now.. comes clearer. I was afraid of doing that for the simple fact i didn't want to explode the bag. I'm not an airbag expert.

 

lol yeah I was afraid too, but it does work. And it was completely safe, nothing went wrong and only took a few minutes.

 

Nice to know ! That's why I havn't bought the itr wheel. Now that I know you can swap those i'll get the steering wheel.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PeArL_Dc5 &raquo;</TD></TR><TR><TD CLASS="quote">where can u get he red H sticker?
</TD></TR></TABLE>
$6.00 shipped
http://www.corsportusa.com/sto...=1088