what header do i need to use on my crx with b16 swap? i have a/c in my car. i want one that is going to clear my a/c lines and crossmember. am i asking to much?


this is the best picture i have right now.

 

Yes, you are asking too much.

You will need to ditch the stock crossmember.

 

naaah, just find yourself a good quality 4-2-1 or even a 4-1 header (with a little trimming) will fit.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I CRX I &raquo;</TD></TR><TR><TD CLASS="quote">naaah, just find yourself a good quality 4-2-1 or even a 4-1 header (with a little trimming) will fit.</TD></TR></TABLE>

Im just not a fan of hacking the stock crossmember. Too many problems down the road from doing that. Rust, cracks, etc....just not worth 2 hp.

 

well i really just trimmed the lip on the crossmember, about 4-5 inches, then hammered it in and sprayed some rustoleum worked like a charm with my 4-1 header. thats until i bought an aftermarket cross member of course but i think 4-2-1 header would fit a little more snug dont ya think?