sfwd guys, what are you 60'?
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
I have gotten the car to go consistant 1.57/1.58 60's and last night started playing with tire pressure and got her down even more. Right after that something went wrong with the trans/clutch combo. The car was locking me out of 2nd and then 4th. The rest of the run was a wash. left lane...1.542
and yes this was on a 24.5 tire.
and yes this was on a 24.5 tire.
My car absolutly sucks to 60 feet. I have tried everything accept the front shock setup. I have been running the same pos setup for a while. I tried the front omni's and it was even worse. lol. My best 60 was in pomona 2005 with a 1.58. Thats with full boost from the hit. Now that I think of it, I was on M&H's too. wtf?
Now if you start talking about 330's I have a hand full of 4.2?'s
Now if you start talking about 330's I have a hand full of 4.2?'s
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">Showoff...
</TD></TR></TABLE>
and worst scan job evar !
nice 60' time though -- best ferguson ever did i think was a 1.56, we were pretty consistent between 1.59 and 1.62
</TD></TR></TABLE>and worst scan job evar !
nice 60' time though -- best ferguson ever did i think was a 1.56, we were pretty consistent between 1.59 and 1.62
i think im the only car in spfwd that has never had a 1.5x 60 foot lol. after i got an alignment my 60's were about the same, 1.62-1.63 but my 330's dropped alot....then everything else went to hell.
next year hopefully i can do a bit better lol
next year hopefully i can do a bit better lol
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Innes »</TD></TR><TR><TD CLASS="quote">
and worst scan job evar !
</TD></TR></TABLE>
Hey back off,
and worst scan job evar !
</TD></TR></TABLE>
Hey back off,
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miller »</TD></TR><TR><TD CLASS="quote">
Hey back off,
</TD></TR></TABLE>
Truth hurt? that scan sucks Chris
Hey back off,
</TD></TR></TABLE>
Truth hurt? that scan sucks Chris
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Clayton »</TD></TR><TR><TD CLASS="quote">
Truth hurt? that scan sucks Chris
</TD></TR></TABLE>...sucks is an understatement. i cant see that **** even if i had dave's glasses.
Truth hurt? that scan sucks Chris
</TD></TR></TABLE>...sucks is an understatement. i cant see that **** even if i had dave's glasses.
1.55 is the best ive done. Funny thing is the higher I went in tire pressure the better it got. 5.5 to 6.2 And removed all rebound and compression in the front shocks. But I usually do 1.58-1.60 since I added the 70lbs up front. Still gotta mess with the rears a bit since the added weight.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged »</TD></TR><TR><TD CLASS="quote">i think im the only car in spfwd that has never had a 1.5x 60 foot lol. after i got an alignment my 60's were about the same, 1.62-1.63 but my 330's dropped alot....then everything else went to hell.
next year hopefully i can do a bit better lol
</TD></TR></TABLE>
CRX was right there with you, A low 1.6 was a miracle for my car...lol.
next year hopefully i can do a bit better lol
</TD></TR></TABLE>CRX was right there with you, A low 1.6 was a miracle for my car...lol.
I'm sure just typing in the incrementals will do, probably don't have to get someone to scan it again. lol Nah, wait, i'll call
if I don't see the slip.
if I don't see the slip.
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
^ you need a new monitor my man, i know the scan is bad but i can atleast make it out here on my screen. You need to get rid of that 13" screen and upgrade, lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Innes »</TD></TR><TR><TD CLASS="quote">^^^^ both of you need to quit talking on the internet and go weld something</TD></TR></TABLE>
i cant even see my hand infront of my face, nevermind that slip.. lol
i cant even see my hand infront of my face, nevermind that slip.. lol
Thread Starter
Honda-Tech Member
Joined: Dec 2001
Posts: 12,822
Likes: 0
From: long island, ny, united states
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chameleon »</TD></TR><TR><TD CLASS="quote">oh man what a showoff... someones gonna have to beat that at the shop sooner or later.. lol</TD></TR></TABLE>
Lol, i cant wait to get paid. Dont worry Manny it will only get better
Lol, i cant wait to get paid. Dont worry Manny it will only get better
i was pulling consistent 1.6x this past weekend. 7.5 psi in tha tires and 8-9 psi launching. I never really launch at full throttle though, close but not full. We all have our ways.




