Need to find the right Donut Gasket for Yonaka motorsports ITR Header.

The biggest Gasket I found at autostore was too small.

Anybody else use this header before? http://www.yonaka.com/product_...aders

If so could you let me know which gasket you used? thanks.

 

bring your header to an autozone/advanced auto parts or any other auto parts store and tell them what your looking for.... theyll be able to set you up with a gasket that will work perfectly for ya...

 

or birng your header to a muffler shop..they will match for u too. with 2.5" collector size.thats not hard to find.

 

Any S2000 donut gasket will work, as well as 02-05 CRV donuts gaskets.

 

Just go to napa and ask for a 2.5 collector doughnut. Done.

 

thanks guys will let you know if it fits.

so I take it you have used this header before all who replied?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DelsolioGSR1996 &raquo;</TD></TR><TR><TD CLASS="quote">thanks guys will let you know if it fits.

so I take it you have used this header before all who replied?</TD></TR></TABLE>

No, but a lot of people have a header with a 25.5" collector

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DelsolioGSR1996 &raquo;</TD></TR><TR><TD CLASS="quote">so I take it you have used this header before all who replied?</TD></TR></TABLE>

Probably not, but it appears to be one of the many JDM ITR 4-1 replicas, which all use the standard 2.5" OD collector size.