FS: 82mm Endyn Rollerwave Pistons & GSR Rods
Thread Starter
Honda-Tech Member
Joined: Jan 2003
Posts: 6,565
Likes: 1
From: Herkimer, NY, USA
FS: 82mm Endyn Rollerwave Pistons & GSR Rods
For sale are the 82mm Endyn Rollerwaves that were in my all-motor setup. I've decided to go with a boost setup so these have to go.
These have less than 1500 miles on them, and they look damn good. A little dark on the tops; I tried to clean them up but I didn't have the proper solvent(s) or know-how, so I didn't do much.
Rods are shotpeened GSR OEM. If you haven't heard of this, shotpeening strengthens metals be eliminating micro-cracks on the surface of metals.
These are in really good shape; skirts are damn close to perfect, and no pits/dings/holes in the tops of the pistons...
$350 shipped
^^ I no longer have the box, but pic shows the piston specs.
Modified by B18C_EJ8 at 11:23 AM 11/14/2007
These have less than 1500 miles on them, and they look damn good. A little dark on the tops; I tried to clean them up but I didn't have the proper solvent(s) or know-how, so I didn't do much.
Rods are shotpeened GSR OEM. If you haven't heard of this, shotpeening strengthens metals be eliminating micro-cracks on the surface of metals.
These are in really good shape; skirts are damn close to perfect, and no pits/dings/holes in the tops of the pistons...
$350 shipped
^^ I no longer have the box, but pic shows the piston specs.
Modified by B18C_EJ8 at 11:23 AM 11/14/2007
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Jan 2003
Posts: 6,565
Likes: 1
From: Herkimer, NY, USA
I made 197hp on them... With Skunk 2 stage 2 cams, S2 Pro intake manifold & Edelbrock header with 2.5" collector mod.. Compression was approx 12.2:1 since the head was milled a bit...
Thread
Thread Starter
Forum
Replies
Last Post
Civic2bBuilt
Classifieds: Forced Induction
0
Aug 21, 2015 04:25 PM