Sale: F22, F22b1, H22 Tranny Trans, AEM ECU, Quaife, FMAX, Autometer, Golden Eagle, DSS Axles, Tial,
Tranny SOLD
Working 30-1020 AEM ECU recently pulled to put car back to stock. Worked perfectly on F22b1 will also work on:
"EMS P/N 30-1020
96-99 Acura Integra / 97 Acura
2.2CL / 96-97 Honda Accord / 96-98
Honda Civic / 96-97 Honda Del Sol
/ 96-01 Honda Prelude"
Comes with box and serial cable.
$660 shipped to greater 48 states. Paypal only please.




Golden Eagle Sleeved F22b1 bare block. Needs bored/honed. Cylinder #4 has scoring, all other cylinders have good hone patterns. This block DOES need work, but the price reflects condition.
Oil sensor port has been tapped to accomodate tee for oil line and sensor. I will include the tap, the tee, and an oil pressure sensor with the block. I had no leaks with this set up.
Rest of block is stock as seen below.
$450 shipped to greater 48 states. Paypal only please.













AXLES SOLD!
RODS SOLD!
Used FMAX piping and intercooler for Accord and CL F22b1 apps (possibly F23 apps as well). FMAX injector bungs capped. Comes with HKS blow off valve attached. Intercooler in great shape. Comes with all piping connectors.
$375 shipped to lower 48. Paypal only please.







ACT Extreme Pressure plate and street disc used less than 1000 miles. Great clamping pressure with out the solid puck feel (very streetable). Good to 386 ftlbs of torque.
Fits all F and H applications
http://www.advancedclutch.com/...#1931
$150 shipped to lower 48. Paypal only please.




Unorthodox racing aluminum flywheel. Best mod I ever installed when normally aspirated. Has replaceable friction surface (used less than 1000 miles). Weighs 10 lbs versus the stock 20 lbs!
Fits all F and H applications.
$140 shipped to lower 48. Paypal only please.





Used F22B1 Accel 300+ Ignition for Sale. Works great.
Distributor Cap included. All instructions provided. Rev limiter, external coil, and electronic unit, as well as everything pictured is included.
Install Instructions:
http://home.insightbb.com/~niedejb/ign.html
$60 shipped to lower 48. Paypal only please.






Used Silver 35mm Tial Wastgate with 9PSI spring. Works great. In great shape (see pics below).
$135 shipped to lower 48. Paypal only please.





Used injector clips. Came with F22b1 if it matters. Should work with all OBD2 hondas.
$20 Shipped to lower 48. Paypal only please.


Modified by niedejb at 4:47 AM 11/12/2007
Modified by niedejb at 4:50 AM 11/12/2007
Modified by niedejb at 8:43 PM 11/12/2007
Modified by niedejb at 6:38 PM 11/13/2007
Modified by niedejb at 6:39 PM 11/13/2007
Modified by niedejb at 8:38 AM 11/22/2007
Modified by niedejb at 11:02 AM 11/23/2007
Modified by niedejb at 9:18 PM 11/26/2007
Modified by niedejb at 9:18 PM 11/26/2007
Modified by niedejb at 4:27 AM 11/27/2007
Modified by niedejb at 10:37 AM 1/26/2008
Working 30-1020 AEM ECU recently pulled to put car back to stock. Worked perfectly on F22b1 will also work on:
"EMS P/N 30-1020
96-99 Acura Integra / 97 Acura
2.2CL / 96-97 Honda Accord / 96-98
Honda Civic / 96-97 Honda Del Sol
/ 96-01 Honda Prelude"
Comes with box and serial cable.
$660 shipped to greater 48 states. Paypal only please.
Golden Eagle Sleeved F22b1 bare block. Needs bored/honed. Cylinder #4 has scoring, all other cylinders have good hone patterns. This block DOES need work, but the price reflects condition.
Oil sensor port has been tapped to accomodate tee for oil line and sensor. I will include the tap, the tee, and an oil pressure sensor with the block. I had no leaks with this set up.
Rest of block is stock as seen below.
$450 shipped to greater 48 states. Paypal only please.
AXLES SOLD!
RODS SOLD!
Used FMAX piping and intercooler for Accord and CL F22b1 apps (possibly F23 apps as well). FMAX injector bungs capped. Comes with HKS blow off valve attached. Intercooler in great shape. Comes with all piping connectors.
$375 shipped to lower 48. Paypal only please.
ACT Extreme Pressure plate and street disc used less than 1000 miles. Great clamping pressure with out the solid puck feel (very streetable). Good to 386 ftlbs of torque.
Fits all F and H applications
http://www.advancedclutch.com/...#1931
$150 shipped to lower 48. Paypal only please.
Unorthodox racing aluminum flywheel. Best mod I ever installed when normally aspirated. Has replaceable friction surface (used less than 1000 miles). Weighs 10 lbs versus the stock 20 lbs!
Fits all F and H applications.
$140 shipped to lower 48. Paypal only please.
Used F22B1 Accel 300+ Ignition for Sale. Works great.
Distributor Cap included. All instructions provided. Rev limiter, external coil, and electronic unit, as well as everything pictured is included.
Install Instructions:
http://home.insightbb.com/~niedejb/ign.html
$60 shipped to lower 48. Paypal only please.
Used Silver 35mm Tial Wastgate with 9PSI spring. Works great. In great shape (see pics below).
$135 shipped to lower 48. Paypal only please.
Used injector clips. Came with F22b1 if it matters. Should work with all OBD2 hondas.
$20 Shipped to lower 48. Paypal only please.
Modified by niedejb at 4:47 AM 11/12/2007
Modified by niedejb at 4:50 AM 11/12/2007
Modified by niedejb at 8:43 PM 11/12/2007
Modified by niedejb at 6:38 PM 11/13/2007
Modified by niedejb at 6:39 PM 11/13/2007
Modified by niedejb at 8:38 AM 11/22/2007
Modified by niedejb at 11:02 AM 11/23/2007
Modified by niedejb at 9:18 PM 11/26/2007
Modified by niedejb at 9:18 PM 11/26/2007
Modified by niedejb at 4:27 AM 11/27/2007
Modified by niedejb at 10:37 AM 1/26/2008
any chance you would do a package deal on the trans, clutch, and flywheel.... moreover, approx how many miles are on the transmission and LSD, shoot me an email at tekizin2001@aol.com... I am def interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
niedejb
Classifieds: Forced Induction
10
Dec 21, 2010 04:48 PM




