Notices
Vehicles for sale Post vehicles for sale only

Time to get out of the Honda Game for now. FS/FT 94 Teg with lots of spare motors and parts in Spoka

Thread Tools
 
Search this Thread
 
Old Nov 10, 2007 | 12:24 PM
  #1  
a1320honda's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 3,805
Likes: 1
From: Spokane, WA, USA
Default Time to get out of the Honda Game for now. FS/FT 94 Teg with lots of spare motors and parts in Spoka

So its come time to get away from this stuff for now. I need to take more time and do my homework before i go any farther.

Open to all trades plus cash if needed, just show me anything your offering

So heres what im offering.

Specs: 1994 Acura Integra Ls.
Has ABS and SRS, no CEL's
Im the third owner of the car
OBD1 B16
OBD1 SIR tranny with no grinds, shifts amazing (GM Synchromesh)
GSR cams
Chipped P28
PLX-M300 wideband
Auto-meter silver face boost gauge and EGT
walbro 255 intank
Full throttle FPR
Holset HX35 16cm housing (good for 550+hp)
twisted 50mm equal length manifold all braced up
ebay 38mm wastegate and 50mm BOV
2.5" piping
Knockoff precision FMIC
Turboxs MBC set to 10-11psi
2.5" open downpipe
CTR N-1 pulley
deleted A/C and PS
PTE 1000cc injectors
XTD stage 3 clutch
type R flywheel
type R struts
Spoon Sports Springs (rides very very comfortaly)
Tenon HID conversion
JVC fold out DVD player
Alpine type r component set.
LS SE wheels with falken 205/50/15 ziex's (2 are new and the other 2 are worn, but comes with 2 Falken Azenis in excellent shape)
Just had a 4-way laser alignment

The bad:
It has a complete b16 swap in it now, but due to boost controller failure it over boosted and now cylinders 1 and 2 have low compression, could very well be a head gasket but i dont know. Car still runs and even under boost feels amazingly strong.

So to sum it up, you get the teg, and 4 spare motors that need a little work, but all are still good.


Spare Parts:
Complete B20 with low compression in cylinder 4, OBD1 GSR complete that was just rebuilt with about 200 miles on it but had low oil pressure and has ARP head studs, B18a1 thats complete but needs cleaned, honed, and reassembled, B18b1 that is complete but has stripped head bolt holes.

Feel free to ask any questions.

Vid:


Pics:




The bottom end before i put the head on....Very clean inside




The head:



Couple of extras:






Timeslips:




AS IT SITS RIGHT NOW!!






pics of all thats wrong.

The windshield is cracked, the rear spare tire well is all wrinkled for some reason but the car is clean title and has never been in an accident. And as is with most 94-96 tegs the front bumper sagged a little leaving a weird small gap between the hood and bumper cover.





And then just some more random pics.








Most recent timeslip VS. a Modded 3000gt VR-4 (im in the right lane)



More pics



B20


GSR


And the 2 LS's

Old Nov 11, 2007 | 01:17 AM
  #2  
a1320honda's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 3,805
Likes: 1
From: Spokane, WA, USA
Default Re: Time to get out of the Honda Game for now. FS/FT 94 Teg with lots of spare motors and parts in S

1
Old Nov 11, 2007 | 12:34 PM
  #3  
a1320honda's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Feb 2004
Posts: 3,805
Likes: 1
From: Spokane, WA, USA
Default Re: Time to get out of the Honda Game for now. FS/FT 94 Teg with lots of spare motors and parts in S

2
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
a1320honda
Northwest (Sales)
13
Sep 29, 2007 04:22 PM
a1320honda
Vehicles for sale
8
Aug 3, 2007 05:54 AM




All times are GMT -8. The time now is 09:32 PM.