Chicago & Illinois: FS/FT WTB, November 2007
Everything Listed below I have used personally and can guarantee the functionality and condition of. If you have any questions at all PM me. Everything is best offer. Local pickup is welcome. I will ship any of it as
well at your expense.
I have many vouches (check my sig). Thank you!
NEW 94-01 Integra Energy Suspension Kit - $110 obo

Air Fuel Gauge Red Lights (unknown brand) - $25 obo


Motorsport Blackout Oil Pressure Gauge - $25 obo


H22 Complete Intake manifold w/ TB - $180 obo



Rear View Mirror - w/ map lights and attachment plate - $15

H22 Spark Plug Cover - $25

USDM H23a1 CAMS - good condition - $40

OBD2 Honda Crank Angle Sensor - $25 obo

97-01 Prelude Auto Trans ECU ECM - $30 obo


94-01 Integra Cruise Control - $20 obo

94-01 Integra ABS parts and front ABS sensors - Best offer

90-93 DA Integra USDM Headlights w/ brackets and corners $60 obo

92-96 Prelude USDM Headlights - Excellent Condition - $60 obo




NEW - Greddy Profec B Boost Controller w/everything - $150
SOLD on EBAY
Apexi Turbo Timer w/everything - $60 obo - SOLD on EBAY
Netopia 2241 DSL Modem and Router w/ wires and filters - SOLD on EBAY
F22a1 Complete Longblock 120k - Runs Great w/ no distributor - $100 obo
SOLD to redzcstandardhatch
DA 90-93 Integra Real JDM 1pc Black Housing Headlights w/brackets $250obo - SOLD to RuKuSmAsTa2
JDM F22b shortblock 40-50k + F22 Headgasket both for $85
SOLD to OMGBBQTEHWTFDOOD
Modified by Honda_Fanatic at 8:32 AM 11/6/2007
well at your expense.
I have many vouches (check my sig). Thank you!
NEW 94-01 Integra Energy Suspension Kit - $110 obo

Air Fuel Gauge Red Lights (unknown brand) - $25 obo


Motorsport Blackout Oil Pressure Gauge - $25 obo


H22 Complete Intake manifold w/ TB - $180 obo



Rear View Mirror - w/ map lights and attachment plate - $15

H22 Spark Plug Cover - $25

USDM H23a1 CAMS - good condition - $40

OBD2 Honda Crank Angle Sensor - $25 obo

97-01 Prelude Auto Trans ECU ECM - $30 obo


94-01 Integra Cruise Control - $20 obo

94-01 Integra ABS parts and front ABS sensors - Best offer

90-93 DA Integra USDM Headlights w/ brackets and corners $60 obo

92-96 Prelude USDM Headlights - Excellent Condition - $60 obo




NEW - Greddy Profec B Boost Controller w/everything - $150
SOLD on EBAY
Apexi Turbo Timer w/everything - $60 obo - SOLD on EBAY
Netopia 2241 DSL Modem and Router w/ wires and filters - SOLD on EBAY
F22a1 Complete Longblock 120k - Runs Great w/ no distributor - $100 obo
SOLD to redzcstandardhatch
DA 90-93 Integra Real JDM 1pc Black Housing Headlights w/brackets $250obo - SOLD to RuKuSmAsTa2
JDM F22b shortblock 40-50k + F22 Headgasket both for $85
SOLD to OMGBBQTEHWTFDOOD
Modified by Honda_Fanatic at 8:32 AM 11/6/2007
FS: 5 DSM bluetop 450cc Injecters
bought them from a friend who got them from one6 neither of us used them.
80 bucks?
bought them from a friend who got them from one6 neither of us used them.
80 bucks?
FOR SALE--Listing for a friend...Brand new rota track r's. 16x7, they are silver and are mounted on new nitto neo gens. let me know if you need pics, taking best offer need these gone
I have the following items for sale.
<U>FOR SALE: </U> All of the items I have for sale are in perfect condition unless otherwise noted.
Precision 1000cc Injectors (used for less than 2000 miles) $265
Competition Clutch Stage 5 w/ upgraded pressure plate(cost $100 more) (b series hydro trans) (used for less than 2000 miles) $400
24.5x9x13 Slicks (Used for 6 runs) SOLD
Walbro 255lph HP fuel pump (brand new) $95
Walbro 190lph fuel pump (used for less than 2000 miles) $55
GSR cams w/ stock cam gears (great condition, 80K miles) $80
Stock GSR valvetrain (springs, retainers, valves) $Best offer
Blox Intake Manifold for GSR head (used but perfect condition) $140
PM me if interested in anything. I have many vouches on here.
And can some of you guys stop posting your stuff on every damn page...
WTB: WORKING KNOCK SENSOR
WTB: Manual beater but must be somewhat clean
Modified by chubz0r at 7:21 PM 10/30/2007
Modified by chubz0r at 2:53 PM 10/31/2007
Modified by chubz0r at 6:20 PM 11/3/2007
<U>FOR SALE: </U> All of the items I have for sale are in perfect condition unless otherwise noted.
Precision 1000cc Injectors (used for less than 2000 miles) $265
Competition Clutch Stage 5 w/ upgraded pressure plate(cost $100 more) (b series hydro trans) (used for less than 2000 miles) $400
24.5x9x13 Slicks (Used for 6 runs) SOLD
Walbro 255lph HP fuel pump (brand new) $95
Walbro 190lph fuel pump (used for less than 2000 miles) $55
GSR cams w/ stock cam gears (great condition, 80K miles) $80
Stock GSR valvetrain (springs, retainers, valves) $Best offer
Blox Intake Manifold for GSR head (used but perfect condition) $140
PM me if interested in anything. I have many vouches on here.
And can some of you guys stop posting your stuff on every damn page...
WTB: WORKING KNOCK SENSOR
WTB: Manual beater but must be somewhat clean
Modified by chubz0r at 7:21 PM 10/30/2007
Modified by chubz0r at 2:53 PM 10/31/2007
Modified by chubz0r at 6:20 PM 11/3/2007
WTB: GSR camshafts
FS: Partial Greddy turbo kit - $750
http://www.hondamarketplace.co...08134
S1 JDM B16 transmission, comes w/old ACT clutch - $300
Modified by paopao at 3:47 PM 10/30/2007
FS: Partial Greddy turbo kit - $750
http://www.hondamarketplace.co...08134
S1 JDM B16 transmission, comes w/old ACT clutch - $300
Modified by paopao at 3:47 PM 10/30/2007
Trending Topics
- d16a6 (si) intake manifold mpfi: make an offer
- d16a6 (si) pm6 ecu: make an offer
- d15b2 (dx) camshaft with ~94K: make an offer
set of 4 rx8 wheels:
18x8 et 50 5x114.3 with kumho ecsta spt 225/45/18, tires have about 90% left
mint condition
$500 FIRM
- d16a6 (si) pm6 ecu: make an offer
- d15b2 (dx) camshaft with ~94K: make an offer
set of 4 rx8 wheels:
18x8 et 50 5x114.3 with kumho ecsta spt 225/45/18, tires have about 90% left
mint condition
$500 FIRM
I have a BRAND NEW, never installed, full size KOYO Integra radiator for sale. This is an awesome radiator, but I'm going turbo so I can't use it. This is a great radiator for all motor teggies or civics. Looking to get $350 and it comes with the high pressure cap.



[mg]http://i41.photobucket.com/albums/e291/twinoptix/DSC01140.jpg[/img]
I also have two 13" VX rims for sale. They have good tires on them, about 75% tread left. I do have a set of four, but only willing to let them go for two GSR fat fives with tires. Make an offer.

Wheel# 1

Wheel#2

I'm firm on the price of the radiator, but make an offer on the wheels.
OTHER **** FO SALE
B18B1 cylinder head $75
Comes with valvetrain, rockers, no cams
B16 Intake manifold $50
This is an OBD1 manifold. Comes with fuel rail, injectors, IAT sensor, but no TB.

Cusco Oil Catch Can $60
Comes with hoses and clamps. It came off a civic w/ a B-series swap, so the hoses are cut to fit that setup.
B18C1 main block girdle $25
Perfect for you ls-vtec guys that want the added stabilty of a girdle but don't want to use an aftermarket version.
EG/DC Front crossmember H brace $45

B18C1 intake manifold w/ NOS direct port plate $150
Erick's Racing 68mm billet throttle body $150


-Jason
Modified by TwinOptiX at 5:03 PM 10/30/2007



[mg]http://i41.photobucket.com/albums/e291/twinoptix/DSC01140.jpg[/img]
I also have two 13" VX rims for sale. They have good tires on them, about 75% tread left. I do have a set of four, but only willing to let them go for two GSR fat fives with tires. Make an offer.

Wheel# 1

Wheel#2

I'm firm on the price of the radiator, but make an offer on the wheels.
OTHER **** FO SALE
B18B1 cylinder head $75
Comes with valvetrain, rockers, no cams
B16 Intake manifold $50
This is an OBD1 manifold. Comes with fuel rail, injectors, IAT sensor, but no TB.

Cusco Oil Catch Can $60
Comes with hoses and clamps. It came off a civic w/ a B-series swap, so the hoses are cut to fit that setup.
B18C1 main block girdle $25
Perfect for you ls-vtec guys that want the added stabilty of a girdle but don't want to use an aftermarket version.
EG/DC Front crossmember H brace $45

B18C1 intake manifold w/ NOS direct port plate $150
Erick's Racing 68mm billet throttle body $150


-Jason
Modified by TwinOptiX at 5:03 PM 10/30/2007
freshly painted fat fives 320$ obo
milano red lip 205/50/15's
<center>


</center>
Modified by crawlin at 7:18 PM 10/30/2007
milano red lip 205/50/15's
<center>


</center>
Modified by crawlin at 7:18 PM 10/30/2007
fs:
halo projector headlights for 92-95 2dr/hb $80 obo
tw:
f1 spec type 1 frp seat black/gray nearly brand new will include sparco 4pt harness in black also nearly new pm me
wtb:
1 hx centercap
eg 2dr/hb carbon fiber oem style or oem hood
spoon style abs plastic lip for 92-95 civics
halo projector headlights for 92-95 2dr/hb $80 obo
tw:
f1 spec type 1 frp seat black/gray nearly brand new will include sparco 4pt harness in black also nearly new pm me
wtb:
1 hx centercap
eg 2dr/hb carbon fiber oem style or oem hood
spoon style abs plastic lip for 92-95 civics
Just a reminder
We will be having a meet on the first Sunday of November, which is November 4th . Everyone is invited. If the weather permits and all. Below is just the statement that we have made, it includes our hours, location, and phone number. This is kind of a spur of the moment type of thing, it will probably be one of the last meets before the weather turns bad. So instead of waiting for next year we decided to try to get one last meet in before winter.
We want to give a big thank you to all of our customers, past and present, and everyone who has supported us. We've recently moved into a new facility. Our new address is
7434 west 90th street
Bridgeview, Illinois
60455

Our new phone number is 708 599 5884
our hours are
Mon-Fri 10am-6pm
Sat 10am-2pm
Please feel free to stop by or give us a call anytime. Thank you once again for all of the support you have been.
We are planning on having a meet on the 4th of November, its the first Sunday of November if the weather permits.
Once again thank you for supporting us over the years. Feel free to stop by at anytime for a free tour
We will be having a meet on the first Sunday of November, which is November 4th . Everyone is invited. If the weather permits and all. Below is just the statement that we have made, it includes our hours, location, and phone number. This is kind of a spur of the moment type of thing, it will probably be one of the last meets before the weather turns bad. So instead of waiting for next year we decided to try to get one last meet in before winter.
We want to give a big thank you to all of our customers, past and present, and everyone who has supported us. We've recently moved into a new facility. Our new address is
7434 west 90th street
Bridgeview, Illinois
60455

Our new phone number is 708 599 5884
our hours are
Mon-Fri 10am-6pm
Sat 10am-2pm
Please feel free to stop by or give us a call anytime. Thank you once again for all of the support you have been.
We are planning on having a meet on the 4th of November, its the first Sunday of November if the weather permits.
Once again thank you for supporting us over the years. Feel free to stop by at anytime for a free tour
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H22Ej1 »</TD></TR><TR><TD CLASS="quote">^ damn i work
</TD></TR></TABLE>
We might be there late, I mean its 12 till when ever. If you still can't make it, check it out one day you don't work.
</TD></TR></TABLE>We might be there late, I mean its 12 till when ever. If you still can't make it, check it out one day you don't work.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG »</TD></TR><TR><TD CLASS="quote">Rollercoaster
</TD></TR></TABLE>
lol raging bull
</TD></TR></TABLE>lol raging bull
I'm looking to buy one of these...

I remember someone had one posted not too long ago.
I'm going to order it online, but before I do, I want to check if it's available locally.
It's $48 shipped online, so I'm not looking to spend more than that.

I remember someone had one posted not too long ago.
I'm going to order it online, but before I do, I want to check if it's available locally.
It's $48 shipped online, so I'm not looking to spend more than that.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duckmanEG »</TD></TR><TR><TD CLASS="quote">Haha.
</TD></TR></TABLE>
i should get my clutch for free now
</TD></TR></TABLE>
i should get my clutch for free now






