I am parting out my project car because im trying to find a newer eg or ek instead.

First off i have a JDM OBD1 B16a (170hp 10.4cp) w/ a cable ys1 transmission. I have only driven the car up and down the road for about 5 miles on some test drives and the tranny shifts smooth without any grinds. Motor sounds great with no noise. I have a jdm fgk 4-2-1 jasma approved header on it for a obd0 b16 with the two o2 bungs on it but you only need to have one plugged in if your running obd1. And it fits with the stock crossmember. It is a obd1 pr3 ecu and all the wiring is from rywire(includes obd0-1 jumper, distributor jumper and other wiring needed such as vtec solenoid, pressure switch, knock, and o2.

Prices are
---For the Motor/tranny $1600 with the stock header and $1750 with the fgk header.

---Avid Motor mounts and shift linkage $250

---Rywiring is $150 includes everything needed for the swap. Cost $190 s/h on the web site

---Also for sale i have a jdm front end complete with side markers, bumper lights, headlights, corner lights, fenders, front bumper, hood. The one corner of the hood has a wrinkle in it. and the passender fender needs a little bit of work but i will get pictures this week of the imperfections. The front bumper and lights are mint. and the rad support. I have the complete front nose of the car with the accessories too that include the front air intake, the jdm front bumper support and other misc items. for all of this looking to get $850

---Tanabe super racing medallion exhaust used for about a year, $300

---JDM CRX armrest with chip out of it (i'll get pictures) $45

---Two rust free mint crx doors with no door panels $150 for both of them.

---Patch panels for a honda crx for both quarters $100

 

up to the top

 

ttt 1

 

hey would you sell just the tranny and if so how much you looking to get

 

also would like to know how much you sellin the tranny.